The University of Queensland

Corrosion of metallic biomaterials

Venezuela, Jeffrey, Johnston, Sean, Dargusch, Matthew S. and Atrens, Andrej (2021). Corrosion of metallic biomaterials. Metallic biomaterials processing and medical device manufacturing. (pp. 469-515) edited by Cuie Wen. Duxford, United Kingdom: Woodhead Publishing/Elsevier. doi: 10.1016/b978-0-08-102965-7.00014-x

Treatment by external fields

Wang, Gui, Dargusch, Matthew, Easton, Mark and St John, David (2018). Treatment by external fields. Fundamentals of aluminium metallurgy. (pp. 279-332) edited by Roger N. Lumley. Duxford, United Kingdom: Elsevier. doi: 10.1016/b978-0-08-102063-0.00009-6

Understanding the corrosion of Mg and Mg alloys

Atrens, A., Song, G.-L., Shi, Z., Soltan, A., Johnston, S. and Dargusch, M. S. (2017). Understanding the corrosion of Mg and Mg alloys. Reference module in chemistry, molecular sciences and chemical engineering. (pp. 1-20) edited by Jan Reedijk, Hideaki Kakeya, Koop Lammertsma, Roberto Marquardt, Massimo Morbidelli, Hiromi Nakai, Giovanni Natile, Colin Poole, Martin Quack, Kari Rissanen and Klaus Wandelt. Amsterdam, Netherlands: Elsevier. doi: 10.1016/B978-0-12-409547-2.13426-2

Corrosion of Mg for biomedical applications

Atrens, A., Cao, F., Shi, Z. and Dargusch, M. S. (2015). Corrosion of Mg for biomedical applications. Surface coating and modification of metallic biomaterials. (pp. 81-102) edited by Wen, Cuie. Cambridge, United Kingdom : Woodhead Publishing. doi: 10.1016/B978-1-78242-303-4.00003-X

Microstructure and texture inhomogeneity in Ti-10V-2Fe-3Al

Zhao, Juan, Dargusch, Matthew and Davies, Chris H. J. (2012). Microstructure and texture inhomogeneity in Ti-10V-2Fe-3Al. Proceedings of the 12th World Conference on Titanium (Ti-2011 ). (pp. 763-766) edited by Lian Zhou, Hui Chang, Yafeng Lu and Dongsheng Xu. Beijiing, China: Science Press.

Microstructure and mechanical properties of cast Ti25Nb3Mo3Zr2Sn alloy

Wang, Gui, Kent, Damon, Paladugu, Mohanchand, Yu, Zhen Tao and Dargusch, Matthew S. (2010). Microstructure and mechanical properties of cast Ti25Nb3Mo3Zr2Sn alloy. Manufacturing Science and Engineering I: International Conference on Manufacturing Science and Engineering (ICMSE 2009)Procedings, Zhuhai, Peoples Republic of China, 26-28 December, 2009. (pp. 488-491) edited by Zhengyi Jiang and Chunliang Zhang. Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.97-101.488

Creep and bolt-load retention of sand cast elektron MEZ

Bettles, C. J. and Dargusch, M. S. (2000). Creep and bolt-load retention of sand cast elektron MEZ. Magnesium Alloys and their Applications. (pp. 705-710) edited by K. U. Kainer. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA. doi: 10.1002/3527607552.ch111

New insights on the high-corrosion resistance of UHP Mg-Ge alloys tested in a simulated physiological environment

Liu, Ting, Chen, Xingrui, Venezuela, Jeffrey, Wang, Yuan, Shi, Zhiming, Chen, Wenyi and Dargusch, Matthew (2024). New insights on the high-corrosion resistance of UHP Mg-Ge alloys tested in a simulated physiological environment. Journal of Magnesium and Alloys. doi: 10.1016/j.jma.2024.03.002

Optimising degradation and mechanical performance of additively manufactured biodegradable Fe–Mn scaffolds using design strategies based on triply periodic minimal surfaces

Dargusch, Matthew S., Soro, Nicolas, Demir, Ali Gokhan, Venezuela, Jeffrey, Sun, Qiang, Wang, Yuan, Abdal-hay, Abdalla, Alali, Aya Q., Ivanovski, Saso, Previtali, Barbara and Kent, Damon (2024). Optimising degradation and mechanical performance of additively manufactured biodegradable Fe–Mn scaffolds using design strategies based on triply periodic minimal surfaces. Smart Materials in Medicine, 5 (1), 127-139. doi: 10.1016/j.smaim.2023.10.003

Ultrauniform, strong, and ductile 3D-printed titanium alloy through bifunctional alloy design

Zhang, Jingqi, Bermingham, Michael J., Otte, Joseph, Liu, Yingang, Hou, Ziyong, Yang, Nan, Yin, Yu, Bayat, Mohamad, Lin, Weikang, Huang, Xiaoxu, StJohn, David H. and Dargusch, Matthew S. (2024). Ultrauniform, strong, and ductile 3D-printed titanium alloy through bifunctional alloy design. Science, 383 (6683), 639-645. doi: 10.1126/science.adj0141

Ultra-high-purity Mg-Ge anodes enable a long-lasting, high energy-density Mg-air battery

Chen, Xingrui, Venezuela, Jeffrey, Shi, Zhiming, Wang, Lianzhou and Dargusch, Matthew (2024). Ultra-high-purity Mg-Ge anodes enable a long-lasting, high energy-density Mg-air battery. Nano Energy, 122 109269, 109269. doi: 10.1016/j.nanoen.2024.109269

Solvothermally silver doping boosting the thermoelectric performance of polycrystalline Bi2Te3

Chen, Wen-Yi, Shi, Xiao-Lei, Yang, Qishuo, Li, Meng, Lyu, Wanyu, Liu, Ting, Cao, Tianyi, Hu, Boxuan, Liu, Weidi, Sun, Shuai, Mao, Yuanqing, Dargusch, Matthew, Zou, Jin and Chen, Zhi-Gang (2023). Solvothermally silver doping boosting the thermoelectric performance of polycrystalline Bi2Te3. Chemical Engineering Journal, 475 146428, 1-9. doi: 10.1016/j.cej.2023.146428

Advances in biodegradable piezoelectrics for medical implants

Liu, Ting, Wang, Yuan, Hong, Min, Venezuela, Jeffrey, Shi, Wei and Dargusch, Matthew (2023). Advances in biodegradable piezoelectrics for medical implants. Nano Today, 52 101945, 1-30. doi: 10.1016/j.nantod.2023.101945

Zinc-based subcuticular absorbable staples: An in vivo and in vitro study

Yang, Nan, Venezuela, Jeffrey, Allavena, Rachel, Lau, Cora and Dargusch, Matthew (2023). Zinc-based subcuticular absorbable staples: An in vivo and in vitro study. Acta Biomaterialia, 167, 593-607. doi: 10.1016/j.actbio.2023.06.030

Tailoring the discharge performance of extruded Mg-Sm-Al anode for Mg-air battery applications via control of Al content

Chen, Xingrui, Venezuela, Jeffrey, Shi, Zhiming, Le, Qichi and Dargusch, Matthew (2023). Tailoring the discharge performance of extruded Mg-Sm-Al anode for Mg-air battery applications via control of Al content. Materials Today Energy, 36 101363, 101363. doi: 10.1016/j.mtener.2023.101363

Eliminating porosity defects, promoting equiaxed grains and improving the mechanical properties of additively manufactured Ti-22V-4Al with super-transus hot isostatic pressing

Ng, C. H., Bermingham, M. J. and Dargusch, M. S. (2023). Eliminating porosity defects, promoting equiaxed grains and improving the mechanical properties of additively manufactured Ti-22V-4Al with super-transus hot isostatic pressing. Additive Manufacturing, 72 103630, 1-10. doi: 10.1016/j.addma.2023.103630

The influence of strain rate and annealing heat treatments on the corrosion and mechanical properties of WE43 and Zn7Ag biodegradable wires for application in soft tissue reconstructions

Mardina, Zahrina, Venezuela, Jeffrey, Sjafrizal, Teddy, Shi, Zhiming, Dargusch, Matthew S. and Atrens, Andrej (2023). The influence of strain rate and annealing heat treatments on the corrosion and mechanical properties of WE43 and Zn7Ag biodegradable wires for application in soft tissue reconstructions. Materials Today Communications, 35 105809, 105809. doi: 10.1016/j.mtcomm.2023.105809

A review of the origin of equiaxed grains during solidification under mechanical stirring, vibration, electromagnetic, electric-current, and ultrasonic treatments

Balasubramani, Nagasivamuni, Venezuela, Jeffrey, StJohn, David, Wang, Gui and Dargusch, Matthew (2023). A review of the origin of equiaxed grains during solidification under mechanical stirring, vibration, electromagnetic, electric-current, and ultrasonic treatments. Journal of Materials Science and Technology, 144, 243-265. doi: 10.1016/j.jmst.2022.09.067

Diamond‐like carbon films prepared by a low temperature periodic process for application in ventricular assist devices

Jing, Peipei, Zhang, Meili, Chan, Chris H. H., Jing, Fengjuan, Pauls, Jo P., Dargusch, Matthew S., Fraser, John F. and Leng, Yongxiang (2023). Diamond‐like carbon films prepared by a low temperature periodic process for application in ventricular assist devices. Journal of Biomedical Materials Research Part B: Applied Biomaterials, 111 (5), 1048-1058. doi: 10.1002/jbm.b.35213

Towards isotropic behaviour in Ti–6Al–4V fabricated with laser powder bed fusion and super transus hot isostatic pressing

Zhang, Meili, Ng, Chi-Ho, Dehghan-Manshadi, Ali, Hall, Chris, Bermingham, Michael J. and Dargusch, Matthew S. (2023). Towards isotropic behaviour in Ti–6Al–4V fabricated with laser powder bed fusion and super transus hot isostatic pressing. Materials Science and Engineering: A, 874 145094, 1-7. doi: 10.1016/j.msea.2023.145094

The high corrosion-resistance of ultra-high purity Mg-Ge alloy and its discharge performance as anode for Mg-air battery

Chen, Xingrui, Venezuela, Jeffrey and Dargusch, Matthew (2023). The high corrosion-resistance of ultra-high purity Mg-Ge alloy and its discharge performance as anode for Mg-air battery. Electrochimica Acta, 448 142127, 1-15. doi: 10.1016/j.electacta.2023.142127

Exploring the influence of biologically relevant ions on the corrosion behavior of biodegradable zinc in physiological fluids

Almathami, Sharifah, Venezuela, Jeffrey, Yang, Nan, Wang, Yuan, Mardina, Zahrina and Dargusch, Matthew (2023). Exploring the influence of biologically relevant ions on the corrosion behavior of biodegradable zinc in physiological fluids. ACS Biomaterials Science and Engineering, 9 (5), 2301-2316. doi: 10.1021/acsbiomaterials.2c00901

Expedient secondary functions of flexible piezoelectrics for biomedical energy harvesting

Wang, Yuan, Hong, Min, Venezuela, Jeffrey, Liu, Ting and Dargusch, Matthew (2023). Expedient secondary functions of flexible piezoelectrics for biomedical energy harvesting. Bioactive Materials, 22, 291-311. doi: 10.1016/j.bioactmat.2022.10.003

Fabrication and properties of biodegradable akermanite-reinforced Fe35Mn alloys for temporary orthopedic implant applications

Zhang, Meili, Yang, Nan, Dehghan-Manshadi, Ali, Venezuela, Jeffrey, Bermingham, Michael J. and Dargusch, Matthew S. (2023). Fabrication and properties of biodegradable akermanite-reinforced Fe35Mn alloys for temporary orthopedic implant applications. ACS Biomaterials Science and Engineering, 9 (3), 1261-1273. doi: 10.1021/acsbiomaterials.2c01228

Laser additive manufacturing of low‐cost Ti–Mo alloys: microstructural evolution, phase analysis, and mechanical properties

Attar, Hooyar, Ehtemam-Haghighi, Shima, Kent, Damon and Dargusch, Matthew S. (2023). Laser additive manufacturing of low‐cost Ti–Mo alloys: microstructural evolution, phase analysis, and mechanical properties. Advanced Engineering Materials, 25 (6) 2201265. doi: 10.1002/adem.202201265

Impacts of temperature and time on direct nitridation of aluminium powders for preparation of AlN reinforcement

Rogers, Samuel, Dargusch, Matthew and Kent, Damon (2023). Impacts of temperature and time on direct nitridation of aluminium powders for preparation of AlN reinforcement. Materials, 16 (4) 1583, 1-13. doi: 10.3390/ma16041583

Evolution of degradation mechanism and fixation strength of biodegradable Zn–Cu wire as sternum closure suture: an in vitro study

Yang, Nan, Venezuela, Jeffrey, Zhang, Jingqi, Wang, Anguo, Almathami, Sharifah and Dargusch, Matthew (2023). Evolution of degradation mechanism and fixation strength of biodegradable Zn–Cu wire as sternum closure suture: an in vitro study. Journal of the Mechanical Behavior of Biomedical Materials, 138 105658, 1-11. doi: 10.1016/j.jmbbm.2023.105658

Additive manufacturing of anti-bacterial and low-cost Ti–Mo(–Ag) alloys using elemental powders through in situ laser alloying

Xu, J. Y., Li, K. L., Tang, J. C., Zhou, Y. H., Luo, J. P., Tang, W., Lai, Y. X., Dargusch, M. S. and Yan, M. (2023). Additive manufacturing of anti-bacterial and low-cost Ti–Mo(–Ag) alloys using elemental powders through in situ laser alloying. Journal of Materials Science, 58 (5), 2268-2293. doi: 10.1007/s10853-022-08107-6

Towards uniform and enhanced tensile ductility of additively manufactured Ti−5Al−5Mo−5V−3Cr alloy through designing gradient interlayer deposition time

Zhang, Jingqi, Bermingham, Michael, Otte, Joseph, Liu, Yingang and Dargusch, Matthew (2023). Towards uniform and enhanced tensile ductility of additively manufactured Ti−5Al−5Mo−5V−3Cr alloy through designing gradient interlayer deposition time. Scripta Materialia, 223 115066. doi: 10.1016/j.scriptamat.2022.115066

Deep learning based modelling of three-dimensional magnetic field

Nguyen, Van Tai, Bollmann, Steffen, Bermingham, Michael, Nguyen, Ha Xuan and Dargusch, Matthew S. (2023). Deep learning based modelling of three-dimensional magnetic field. Progress In Electromagnetics Research B, 100, 173-189. doi: 10.2528/pierb23051402

Enhancing the corrodibility of biodegradable iron and zinc using poly(lactic) acid (PLA) coating for temporary medical implant applications

Wang, Anguo, Venezuela, Jeffrey and Dargusch, Matthew Simon (2023). Enhancing the corrodibility of biodegradable iron and zinc using poly(lactic) acid (PLA) coating for temporary medical implant applications. Progress in Organic Coatings, 174 107301, 1-18. doi: 10.1016/j.porgcoat.2022.107301

Effect of Hot Isostatic Pressing and heat treatments on porosity of Wire Arc Additive Manufactured Al 2319

Mclean, N., Bermingham, M.J., Colegrove, P., Sales, A., Soro, N., Ng, C.H. and Dargusch, M.S. (2022). Effect of Hot Isostatic Pressing and heat treatments on porosity of Wire Arc Additive Manufactured Al 2319. Journal of Materials Processing Technology, 310 117769, 1-10. doi: 10.1016/j.jmatprotec.2022.117769

Controlling grain size, morphology and texture in additively manufactured β-titanium alloy with super transus hot isostatic pressing

Ng, C. H., Bermingham, M. J. and Dargusch, M. S. (2022). Controlling grain size, morphology and texture in additively manufactured β-titanium alloy with super transus hot isostatic pressing. Additive Manufacturing, 59 (Part B) 103176, 1-12. doi: 10.1016/j.addma.2022.103176

Microstructure refinement in biodegradable Zn-Cu-Ca alloy for enhanced mechanical properties, degradation homogeneity, and strength retention in simulated physiological condition

Yang, Nan, Balasubramani, Nagasivamuni, Venezuela, Jeffrey, Bielefeldt-Ohmann, Helle, Allavena, Rachel, Almathami, Sharifah and Dargusch, Matthew (2022). Microstructure refinement in biodegradable Zn-Cu-Ca alloy for enhanced mechanical properties, degradation homogeneity, and strength retention in simulated physiological condition. Journal of Materials Science and Technology, 125, 1-14. doi: 10.1016/j.jmst.2022.03.006

Realizing a 10°C cooling effect in a flexible thermoelectric cooler using a vortex generator

Xu, Shengduo, Li, Meng, Dai, Yuchen, Hong, Min, Sun, Qiang, Lyu, Wanyu, Liu, Ting, Wang, Yuan, Zou, Jin, Chen, Zhi‐Gang and Dargusch, Matthew (2022). Realizing a 10°C cooling effect in a flexible thermoelectric cooler using a vortex generator. Advanced Materials, 34 (41) 2204508, 1-10. doi: 10.1002/adma.202204508

Optimal array alignment to deliver high performance in flexible conducting polymer-based thermoelectric devices

Xu, Shengduo, Li, Meng, Hong, Min, Yang, Lei, Sun, Qiang, Sun, Shuai, Lyu, Wanyu, Dargusch, Matthew, Zou, Jin and Chen, Zhi-Gang (2022). Optimal array alignment to deliver high performance in flexible conducting polymer-based thermoelectric devices. Journal of Materials Science and Technology, 124, 252-259. doi: 10.1016/j.jmst.2022.03.007

Efficient modelling of permanent magnet field distribution for deep learning applications

Nguyen, Van Tai, Bollmann, Steffen, Bermingham, Michael and Dargusch, Matthew S. (2022). Efficient modelling of permanent magnet field distribution for deep learning applications. Journal of Magnetism and Magnetic Materials, 559 169521, 1-12. doi: 10.1016/j.jmmm.2022.169521

Roles of anion sites in high‐performance GeTe thermoelectrics

Li, Meng, Xu, Sheng‐Duo, Hong, Min, Lyu, Wan‐Yu, Wang, Yuan, Dargusch, Matthew, Zou, Jin, Cheng, Hui‐Ming and Chen, Zhi‐Gang (2022). Roles of anion sites in high‐performance GeTe thermoelectrics. Advanced Functional Materials, 32 (48) 2208579, 1-8. doi: 10.1002/adfm.202208579

An overview and critical assessment of the mechanisms of microstructural refinement during ultrasonic solidification of metals

Balasubramani, Nagasivamuni, Venezuela, Jeffrey, Yang, Nan, Wang, Gui, StJohn, David and Dargusch, Matthew (2022). An overview and critical assessment of the mechanisms of microstructural refinement during ultrasonic solidification of metals. Ultrasonics Sonochemistry, 89 106151, 1-16. doi: 10.1016/j.ultsonch.2022.106151

From bio-inertness to osseointegration and antibacterial activity: a one-step micro-arc oxidation approach for multifunctional Ti implants fabricated by additive manufacturing

Tang, Jincheng, Wu, Zhongzhen, Yao, Xiyu, Zhou, Yinghao, Xiong, Yi, Li, Yulong, Xu, Jingyuan, Dargusch, Matthew S. and Yan, Ming (2022). From bio-inertness to osseointegration and antibacterial activity: a one-step micro-arc oxidation approach for multifunctional Ti implants fabricated by additive manufacturing. Materials and Design, 221 110962, 1-20. doi: 10.1016/j.matdes.2022.110962

Designing against phase and property heterogeneities in additively manufactured titanium alloys

Zhang, Jingqi, Liu, Yingang, Sha, Gang, Jin, Shenbao, Hou, Ziyong, Bayat, Mohamad, Yang, Nan, Tan, Qiyang, Yin, Yu, Liu, Shiyang, Hattel, Jesper Henri, Dargusch, Matthew, Huang, Xiaoxu and Zhang, Ming-Xing (2022). Designing against phase and property heterogeneities in additively manufactured titanium alloys. Nature Communications, 13 (1) 4660, 4660. doi: 10.1038/s41467-022-32446-2

Additively manufactured Fe-35Mn-1Ag lattice structures for biomedical applications

Dehghan-Manshadi, A., Venezuela, J., Demir, A. G., Ye, Q. and Dargusch, M. S. (2022). Additively manufactured Fe-35Mn-1Ag lattice structures for biomedical applications. Journal of Manufacturing Processes, 80, 642-650. doi: 10.1016/j.jmapro.2022.06.010

High strength and ductility of titanium matrix composites by nanoscale design in selective laser melting

Otte, Joseph A., Zou, Jin and Dargusch, Matthew S. (2022). High strength and ductility of titanium matrix composites by nanoscale design in selective laser melting. Journal of Materials Science & Technology, 118, 114-127. doi: 10.1016/j.jmst.2021.12.020

The implementation of Industry 4.0 in manufacturing: from lean manufacturing to product design

Huang, Zhuoyu, Jowers, Casey, Kent, Damon, Dehghan-Manshadi, Ali and Dargusch, Matthew S. (2022). The implementation of Industry 4.0 in manufacturing: from lean manufacturing to product design. International Journal of Advanced Manufacturing Technology, 121 (5-6), 3351-3367. doi: 10.1007/s00170-022-09511-7

Enhancing specific energy absorption of additively manufactured titanium lattice structures through simultaneous manipulation of architecture and constituent material

Zhang, Jingqi, Liu, Yingang, Babamiri, Behzad Bahrami, Zhou, Ying, Dargusch, Matthew, Hazeli, Kavan and Zhang, Ming-Xing (2022). Enhancing specific energy absorption of additively manufactured titanium lattice structures through simultaneous manipulation of architecture and constituent material. Additive Manufacturing, 55 102887, 102887. doi: 10.1016/j.addma.2022.102887

TiB reinforced lattice structures produced by laser powder bed fusion with high elastic admissible strain

Otte, Joseph A., Soro, Nicolas, Yang, Nan, Zou, Jin and Dargusch, Matthew S. (2022). TiB reinforced lattice structures produced by laser powder bed fusion with high elastic admissible strain. Materials Science and Engineering A, 845 143249, 1-15. doi: 10.1016/j.msea.2022.143249

Additive manufacturing of biomimetic titanium-tantalum lattices for biomedical implant applications

Soro, Nicolas, Brodie, Erin G., Abdal-hay, Abdalla, Alali, Aya Q., Kent, Damon and Dargusch, Matthew S. (2022). Additive manufacturing of biomimetic titanium-tantalum lattices for biomedical implant applications. Materials and Design, 218 110688, 1-14. doi: 10.1016/j.matdes.2022.110688

In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devices

Dargusch, Matthew S., Balasubramani, Nagasivamuni, Yang, Nan, Johnston, Sean, Ali, Yahia, Wang, Gui, Venezuela, Jeffrey, Carluccio, Jiwon, Lau, Cora, Allavena, Rachel, Liang, Daniel, Mardon, Karine and Ye, Qingsong (2022). In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devices. Bioactive Materials, 12, 85-96. doi: 10.1016/j.bioactmat.2021.10.026

Surface modification of pure zinc by acid etching: accelerating the corrosion rate and enhancing biocompatibility and antibacterial characteristics

Xiang, Enmao, Gómez-Cerezo, Maria Natividad, Ali, Yahia, Ramachandra, Srinivas Sulugodu, Yang, Nan, Dargusch, Matthew, Moran, Corey S., Ivanovski, Saso and Abdal-hay, Abdalla (2022). Surface modification of pure zinc by acid etching: accelerating the corrosion rate and enhancing biocompatibility and antibacterial characteristics. ACS Applied Materials and Interfaces, 14 (19), 22554-22569. doi: 10.1021/acsami.2c00918

The influence of the protein bovine serum albumin (BSA) on the corrosion of Mg, Zn, and Fe in Zahrina's simulated interstitial fluid

Mardina, Zahrina, Venezuela, Jeffrey, Dargusch, Matthew S., Shi, Zhiming and Atrens, Andrej (2022). The influence of the protein bovine serum albumin (BSA) on the corrosion of Mg, Zn, and Fe in Zahrina's simulated interstitial fluid. Corrosion Science, 199 110160, 1-19. doi: 10.1016/j.corsci.2022.110160

Understanding the grain refinement mechanisms in aluminium 2319 alloy produced by wire arc additive manufacturing

Mclean, N., Bermingham, M. J., Colegrove, P., Sales, A. and Dargusch, M. S. (2022). Understanding the grain refinement mechanisms in aluminium 2319 alloy produced by wire arc additive manufacturing. Science and Technology of Welding and Joining, 27 (6), 479-489. doi: 10.1080/13621718.2022.2064704

Design, mechanical and degradation requirements of biodegradable metal mesh for pelvic floor reconstruction

Mardina, Zahrina, Venezuela, Jeffrey, Maher, Christopher, Shi, Zhiming, Dargusch, Matthew S. and Atrens, Andrej (2022). Design, mechanical and degradation requirements of biodegradable metal mesh for pelvic floor reconstruction. Biomaterials Science, 10 (13), 3371-3392. doi: 10.1039/d2bm00179a

Mechanical properties and deformation mechanisms of martensitic Ti6Al4V alloy processed by laser powder bed fusion and water quenching

Sun, Shoujin, Zhang, Duyao, Palanisamy, Suresh, Liu, Qianchu and Dargusch, Matthew S. (2022). Mechanical properties and deformation mechanisms of martensitic Ti6Al4V alloy processed by laser powder bed fusion and water quenching. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 839 142817, 1. doi: 10.1016/j.msea.2022.142817

Metastable Ti-Fe-Ge alloys with high elastic admissible strain

Sjafrizal, Teddy, Kent, Damon, Dehghan-Manshadi, Ali, Xiao, Wenlong and Dargusch, Matthew S. (2022). Metastable Ti-Fe-Ge alloys with high elastic admissible strain. Materialia, 21 101304, 101304. doi: 10.1016/j.mtla.2021.101304

Microstructure evolution, mechanical properties and corrosion behavior of biodegradable Zn-2Cu-0.8Li alloy during room temperature drawing

Gao, Zhiqiang, Zhang, Xiyuan, Huang, Hua, Chen, Chun, Jiang, Jimiao, Niu, Jialin, Dargusch, Matthew and Yuan, Guangyin (2022). Microstructure evolution, mechanical properties and corrosion behavior of biodegradable Zn-2Cu-0.8Li alloy during room temperature drawing. Materials Characterization, 185 111722, 111722. doi: 10.1016/j.matchar.2022.111722

Surface modification of biomedical Ti and Ti alloys: a review on current advances

Xu, Jingyuan, Zhang, Jiawen, Shi, Yangfan, Tang, Jincheng, Huang, Danni, Yan, Ming and Dargusch, Matthew S. (2022). Surface modification of biomedical Ti and Ti alloys: a review on current advances. Materials, 15 (5) 1749, 1749. doi: 10.3390/ma15051749

Towards β-fleck defect free additively manufactured titanium alloys by promoting the columnar to equiaxed transition and grain refinement

Ng, C. H., Bermingham, M. J., Yuan, L. and Dargusch, M. S. (2022). Towards β-fleck defect free additively manufactured titanium alloys by promoting the columnar to equiaxed transition and grain refinement. Acta Materialia, 224 117511, 117511. doi: 10.1016/j.actamat.2021.117511

Effect of Mg on dynamic recrystallization of Zn–Mg alloys during room-temperature compression

Liu, Shiyang, Zhan, Hongyi, Kent, Damon, Tan, Qiyang, Yin, Yu, Doan, Nghiem, Wang, Chang, Dargusch, Matthew and Wang, Gui (2022). Effect of Mg on dynamic recrystallization of Zn–Mg alloys during room-temperature compression. Materials Science and Engineering: A, 830 142243, 142243. doi: 10.1016/j.msea.2021.142243

Ultrasonic treatment for the refinement of brittle CaZn13 phases in a biomedical Zn-Cu-Ca alloy

Balasubramani, Nagasivamuni, Yang, Nan, Venezuela, Jeffrey and Dargusch, Matthew (2021). Ultrasonic treatment for the refinement of brittle CaZn13 phases in a biomedical Zn-Cu-Ca alloy. Materials Letters, 305 130754, 130754. doi: 10.1016/j.matlet.2021.130754

Biodegradable shape memory alloys: progress and prospects

Wang, Yuan, Venezuela, Jeffrey and Dargusch, Matthew (2021). Biodegradable shape memory alloys: progress and prospects. Biomaterials, 279 121215, 1-28. doi: 10.1016/j.biomaterials.2021.121215

Two-dimensional flexible thermoelectric devices: Using modeling to deliver optimal capability

Xu, Shengduo, Hong, Min, Li, Meng, Sun, Qiang, Yin, Yu, Liu, Weidi, Shi, Xiaolei, Dargusch, Matthew, Zou, Jin and Chen, Zhi-Gang (2021). Two-dimensional flexible thermoelectric devices: Using modeling to deliver optimal capability. Applied Physics Reviews, 8 (4) 041404, 1-8. doi: 10.1063/5.0067930

Zinc-nutrient element based alloys for absorbable wound closure devices fabrication: current status, challenges, and future prospects

Yang, Nan, Venezuela, Jeffrey, Almathami, Sharifah and Dargusch, Matthew (2021). Zinc-nutrient element based alloys for absorbable wound closure devices fabrication: current status, challenges, and future prospects. Biomaterials, 280 121301, 121301. doi: 10.1016/j.biomaterials.2021.121301

Electrochemical stability and biofouling behavior of differently polarized Ti surfaces in simulated and natural seawater

Dai, Zhaoxia, Wang, Zi Ming, Zheng, Dajiang, Song, Guang-Ling, Feng, Danqing, Dargusch, Matthew, Chang, Hui and Zhou, Lian (2021). Electrochemical stability and biofouling behavior of differently polarized Ti surfaces in simulated and natural seawater. Journal of Materials Engineering and Performance, 31 (4), 2823-2836. doi: 10.1007/s11665-021-06425-5

Advances and challenges in 2D MXenes: from structures to energy storage and conversions

Meng, Weixue, Liu, Xingjiang, Song, Haoqiang, Xie, Yu, Shi, Xiaolei, Dargusch, Matthew, Chen, Zhi-Gang, Tang, Zhiyong and Lu, Siyu (2021). Advances and challenges in 2D MXenes: from structures to energy storage and conversions. Nano Today, 40 101273, 101273. doi: 10.1016/j.nantod.2021.101273

Influence of strain rate and crystallographic orientation on dynamic recrystallization of pure Zn during room-temperature compression

Liu, Shiyang, Kent, Damon, Zhan, Hongyi, Doan, Nghiem, Wang, Chang, Yu, Sen, Dargusch, Matthew and Wang, Gui (2021). Influence of strain rate and crystallographic orientation on dynamic recrystallization of pure Zn during room-temperature compression. Journal of Materials Science and Technology, 86, 237-250. doi: 10.1016/j.jmst.2020.12.077

Investigating the grain refinement mechanisms of pulsed electric current, ultrasonic and melt stirring solidification of pure aluminium

Balasubramani, Nagasivamuni, Xu, Yanyi, Zhang, Yunhu, Zhai, Qijie, Wang, Gui, StJohn, David and Dargusch, Matthew (2021). Investigating the grain refinement mechanisms of pulsed electric current, ultrasonic and melt stirring solidification of pure aluminium. JOM, 73 (12), 3873-3882. doi: 10.1007/s11837-021-04904-7

Anti-thrombogenic surface coatings for extracorporeal membrane oxygenation: a narrative review

Zhang, Meili, Pauls, Jo P., Bartnikowski, Nicole, Haymet, Andrew B., Chan, Chris H. H., Suen, Jacky Y., Schneider, Bailey, Ki, Katrina K., Whittaker, Andrew K., Dargusch, Matthew S. and Fraser, John F. (2021). Anti-thrombogenic surface coatings for extracorporeal membrane oxygenation: a narrative review. ACS Biomaterials Science and Engineering, 7 (9), 4402-4419. doi: 10.1021/acsbiomaterials.1c00758

Optimizing electronic quality factor toward high‐performance Ge1−x−y Tax SbyTe thermoelectrics: the role of transition metal doping

Li, Meng, Sun, Qiang, Xu, Sheng‐Duo, Hong, Min, Lyu, Wan‐Yu, Liu, Ji‐Xing, Wang, Yuan, Dargusch, Matthew, Zou, Jin and Chen, Zhi‐Gang (2021). Optimizing electronic quality factor toward high‐performance Ge1−x−y Tax SbyTe thermoelectrics: the role of transition metal doping. Advanced Materials, 33 (40) 2102575, 1-8. doi: 10.1002/adma.202102575

Data – driven modelling of the interaction force between permanent magnets

Nguyen, Van Tai, Bermingham, Michael and Dargusch, Matthew S. (2021). Data – driven modelling of the interaction force between permanent magnets. Journal of Magnetism and Magnetic Materials, 532 167869, 167869. doi: 10.1016/j.jmmm.2021.167869

A review of the physiological impact of rare earth elements and their uses in biomedical Mg alloys

Weng, Weijie, Biesiekierski, Arne, Li, Yuncang, Dargusch, Matthew and Wen, Cuie (2021). A review of the physiological impact of rare earth elements and their uses in biomedical Mg alloys. Acta Biomaterialia, 130, 80-97. doi: 10.1016/j.actbio.2021.06.004

Conducting polymer-based flexible thermoelectric materials and devices: from mechanisms to applications

Xu, Shengduo, Shi, Xiao-Lei, Dargusch, Matthew, Di, Chongan, Zou, Jin and Chen, Zhi-Gang (2021). Conducting polymer-based flexible thermoelectric materials and devices: from mechanisms to applications. Progress in Materials Science, 121 100840, 100840. doi: 10.1016/j.pmatsci.2021.100840

Hydrogen-induced fast fracture in notched 1500 and 1700 MPa class automotive martensitic advanced high-strength steel

Venezuela, Jeffrey, Hill, Timothy, Zhou, Qingjun, Li, Huixing, Shi, Zhiming, Dong, Futao, Knibbe, Ruth, Zhang, Mingxing, Dargusch, Matthew S. and Atrens, Andrej (2021). Hydrogen-induced fast fracture in notched 1500 and 1700 MPa class automotive martensitic advanced high-strength steel. Corrosion Science, 188 109550, 1-17. doi: 10.1016/j.corsci.2021.109550

Impact of scandium on mechanical properties, corrosion behavior, friction and wear performance, and cytotoxicity of a β-type Ti–24Nb–38Zr–2Mo alloy for orthopedic applications

Tong, Xian, Sun, Quanxiang, Zhang, Dechuang, Wang, Kun, Dai, Yilong, Shi, Zimu, Li, Yuncang, Dargusch, Matthew, Huang, Shengbin, Ma, Jianfeng, Wen, Cuie and Lin, Jixing (2021). Impact of scandium on mechanical properties, corrosion behavior, friction and wear performance, and cytotoxicity of a β-type Ti–24Nb–38Zr–2Mo alloy for orthopedic applications. Acta Biomaterialia, 134, 791-803. doi: 10.1016/j.actbio.2021.07.061

Surface coatings for rotary ventricular assist devices: a systematic review

Zhang, Meili, Tansley, Geoffrey D., Dargusch, Matthew S., Fraser, John F. and Pauls, Jo P. (2021). Surface coatings for rotary ventricular assist devices: a systematic review. ASAIO Journal, 68 (5), 623-632. doi: 10.1097/MAT.0000000000001534

Tuning Ta coating properties through chemical and plasma etching pre-treatment of NiTi wire substrates

Pace, Ben, Bendavid, Avi, Ahsan, Mohammed, Dargusch, Matthew, Bhatia, Vijay, Byrnes, Jacob and Cairney, Julie (2021). Tuning Ta coating properties through chemical and plasma etching pre-treatment of NiTi wire substrates. Surface and Coatings Technology, 418 127214, 1-10. doi: 10.1016/j.surfcoat.2021.127214

Characterization of nano precipitate phase in an as-extruded Zn-Cu alloy

Jiang, Jimiao, Huang, Hua, Niu, Jialin, Jin, Zhaohui, Dargusch, Matthew and Yuan, Guangyin (2021). Characterization of nano precipitate phase in an as-extruded Zn-Cu alloy. Scripta Materialia, 200 113907, 1-6. doi: 10.1016/j.scriptamat.2021.113907

High-efficiency thermocells driven by thermo-electrochemical processes

Li, Meng, Hong, Min, Dargusch, Matthew, Zou, Jin and Chen, Zhi-Gang (2021). High-efficiency thermocells driven by thermo-electrochemical processes. Trends in Chemistry, 3 (7), 561-574. doi: 10.1016/j.trechm.2020.11.001

High stability and high strength β-titanium alloys for additive manufacturing

Ng, C. H., Bermingham, M. J., Kent, D. and Dargusch, M. S. (2021). High stability and high strength β-titanium alloys for additive manufacturing. Materials Science and Engineering A, 816 141326, 1-7. doi: 10.1016/j.msea.2021.141326

Mechanisms of the origin of fine and non-dendritic grains at the sonotrode–liquid metal interface during ultrasonic solidification of metals

Balasubramani, Nagasivamuni, Wang, Gui, StJohn, David H. and Dargusch, Matthew S. (2021). Mechanisms of the origin of fine and non-dendritic grains at the sonotrode–liquid metal interface during ultrasonic solidification of metals. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (6), 2676-2688. doi: 10.1007/s11661-021-06264-y

Binary Zn–Ti alloys for orthopedic applications: corrosion and degradation behaviors, friction and wear performance, and cytotoxicity

Wang, Kun, Tong, Xian, Lin, Jixing, Wei, Aiping, Li, Yuncang, Dargusch, Matthew and Wen, Cuie (2021). Binary Zn–Ti alloys for orthopedic applications: corrosion and degradation behaviors, friction and wear performance, and cytotoxicity. Journal of Materials Science and Technology, 74, 216-229. doi: 10.1016/j.jmst.2020.10.031

Structural evolution of high‐performance Mn‐alloyed thermoelectric materials: a case study of SnTe

Sun, Qiang, Chen, Zhi‐Yu, Li, Meng, Shi, Xiao‐Lei, Xu, Sheng‐Duo, Yin, Yu, Dargusch, Matthew, Zou, Jin, Ang, Ran and Chen, Zhi‐Gang (2021). Structural evolution of high‐performance Mn‐alloyed thermoelectric materials: a case study of SnTe. Small, 17 (25) 2100525, 1-10. doi: 10.1002/smll.202100525

Carbon allotrope hybrids advance thermoelectric development and applications

Liu, Wei-Di, Yu, Yao, Dargusch, Matthew, Liu, Qingfeng and Chen, Zhi-Gang (2021). Carbon allotrope hybrids advance thermoelectric development and applications. Renewable and Sustainable Energy Reviews, 141 110800, 110800. doi: 10.1016/j.rser.2021.110800

The influence of Ca and Cu additions on the microstructure, mechanical and degradation properties of Zn–Ca–Cu alloys for absorbable wound closure device applications

Yang, Nan, Balasubramani, Nagasivamuni, Venezuela, Jeffrey, Almathami, Sharifah, Wen, Cuie and Dargusch, Matthew (2021). The influence of Ca and Cu additions on the microstructure, mechanical and degradation properties of Zn–Ca–Cu alloys for absorbable wound closure device applications. Bioactive Materials, 6 (5), 1436-1451. doi: 10.1016/j.bioactmat.2020.10.015

An in vitro evaluation of the hierarchical micro/nanoporous structure of a Ti3Zr2Sn3Mo25Nb alloy after surface dealloying

Wang, Lan, Zhou, Wenhao, Yu, Zhentao, Yu, Sen, Zhou, Lian, Cao, Yemin, Dargusch, Matthew and Wang, Gui (2021). An in vitro evaluation of the hierarchical micro/nanoporous structure of a Ti3Zr2Sn3Mo25Nb alloy after surface dealloying. ACS Applied Materials and Interfaces, 13 (13), 15017-15030. doi: 10.1021/acsami.1c02140

A review on the progress and challenges of binder jet 3D printing of sand moulds for advanced casting

Sivarupan, Tharmalingam, Balasubramani, Nagasivamuni, Saxena, Prateek, Nagarajan, Devarajan, El Mansori, Mohamed, Salonitis, Konstantinos, Jolly, Mark and Dargusch, Matthew S. (2021). A review on the progress and challenges of binder jet 3D printing of sand moulds for advanced casting. Additive Manufacturing, 40 101889, 1-17. doi: 10.1016/j.addma.2021.101889

Simultaneously optimized thermoelectric performance of n-type Cu2Se alloyed Bi2Te3

Chen, Jie, Bao, Deyu, Sun, Qiang, Liu, Wei-Di, Liu, Can, Tang, Jun, Yang, Lei, Zhou, Dali, Dargusch, Matthew S. and Chen, Zhi-Gang (2021). Simultaneously optimized thermoelectric performance of n-type Cu2Se alloyed Bi2Te3. Journal of Solid State Chemistry, 296 121987, 1-7. doi: 10.1016/j.jssc.2021.121987

Biodegradable Zn–3Cu and Zn–3Cu–0.2Ti alloys with ultrahigh ductility and antibacterial ability for orthopedic applications

Lin, Jixing, Tong, Xian, Wang, Kun, Shi, Zimu, Li, Yuncang, Dargusch, Matthew and Wen, Cuie (2021). Biodegradable Zn–3Cu and Zn–3Cu–0.2Ti alloys with ultrahigh ductility and antibacterial ability for orthopedic applications. Journal of Materials Science and Technology, 68, 76-90. doi: 10.1016/j.jmst.2020.06.052

Biodegradable Zn−3Mg−0.7Mg2Si composite fabricated by high-pressure solidification for bone implant applications

Tong, Xian, Cai, Wenhao, Lin, Jixing, Wang, Kun, Jin, Lufan, Shi, Zimu, Zhang, Dechuang, Lin, Jianguo, Li, Yuncang, Dargusch, Matthew and Wen, Cuie (2021). Biodegradable Zn−3Mg−0.7Mg2Si composite fabricated by high-pressure solidification for bone implant applications. Acta Biomaterialia, 123, 407-417. doi: 10.1016/j.actbio.2020.12.059

Eliminating segregation defects during additive manufacturing of high strength β-titanium alloys

Ng, C. H., Bermingham, M. J. and Dargusch, M. S. (2021). Eliminating segregation defects during additive manufacturing of high strength β-titanium alloys. Additive Manufacturing, 39 101855, 1-12. doi: 10.1016/j.addma.2021.101855

Hydrogen-induced delayed fracture of a 1180 MPa martensitic advanced high-strength steel under U-bend loading

Li, Huixing, Venezuela, Jeffrey, Zhou, Qingjun, Luzin, Vladimir, Yan, Ming, Shi, Zhiming, Knibbe, Ruth, Zhang, Mingxing, Dong, Futao, Dargusch, Matthew S. and Atrens, Andrej (2021). Hydrogen-induced delayed fracture of a 1180 MPa martensitic advanced high-strength steel under U-bend loading. Materials Today Communications, 26 101887, 101887. doi: 10.1016/j.mtcomm.2020.101887

Current understanding of the origin of equiaxed grains in pure metals during ultrasonic solidification and a comparison of grain formation processes with low frequency vibration, pulsed magnetic and electric-current pulse techniques

Balasubramani, Nagasivamuni, Wang, Gui, StJohn, David H. and Dargusch, Matthew S. (2021). Current understanding of the origin of equiaxed grains in pure metals during ultrasonic solidification and a comparison of grain formation processes with low frequency vibration, pulsed magnetic and electric-current pulse techniques. Journal of Materials Science and Technology, 65, 38-53. doi: 10.1016/j.jmst.2020.04.080

Microstructural evolution and mechanical properties of bulk and porous low-cost Ti–Mo–Fe alloys produced by powder metallurgy

Ehtemam-Haghighi, Shima, Attar, Hooyar, Okulov, Ilya V., Dargusch, Matthew S. and Kent, Damon (2021). Microstructural evolution and mechanical properties of bulk and porous low-cost Ti–Mo–Fe alloys produced by powder metallurgy. Journal of Alloys and Compounds, 853 156768. doi: 10.1016/j.jallcom.2020.156768

Achieving high ductility in a selectively laser melted commercial pure-titanium via in-situ grain refinement

Zhang, Jingqi, Liu, Yingang, Bayat, Mohamad, Tan, Qiyang, Yin, Yu, Fan, Zhiqi, Liu, Shiyang, Hattel, Jesper Henri, Dargusch, Matthew and Zhang, Ming-Xing (2021). Achieving high ductility in a selectively laser melted commercial pure-titanium via in-situ grain refinement. Scripta Materialia, 191, 155-160. doi: 10.1016/j.scriptamat.2020.09.023

Cost-affordable Ti-6Al-4V for additive manufacturing: powder modification, compositional modulation and laser in-situ alloying

Dong, Y. P., Li, Y. L., Zhou, S. Y., Zhou, Y. H., Dargusch, M. S., Peng, H. X. and Yan, M. (2021). Cost-affordable Ti-6Al-4V for additive manufacturing: powder modification, compositional modulation and laser in-situ alloying. Additive Manufacturing, 37 101699, 1-9. doi: 10.1016/j.addma.2020.101699

Effect of corrosion inhibiting compounds on the corrosion behaviour of pure magnesium and the magnesium alloys EV31A, WE43B and ZE41A

Soltan, Akif, Dargusch, Matthew S., Shi, Zhiming, Jones, Fiona, Wood, Barry, Gerrard, Darren and Atrens, Andrej (2021). Effect of corrosion inhibiting compounds on the corrosion behaviour of pure magnesium and the magnesium alloys EV31A, WE43B and ZE41A. Journal of Magnesium and Alloys, 9 (2), 432-455. doi: 10.1016/j.jma.2020.07.006

Effect of in situ tempering on the mechanical, microstructural and corrosion properties of 316L stainless steel laser-cladded coating on mild steel

Rahman Rashid, Rizwan Abdul, Javed, Muhammed Awais, Barr, Cameron, Palanisamy, Suresh, Matthews, Neil and Dargusch, Matthew Simon (2021). Effect of in situ tempering on the mechanical, microstructural and corrosion properties of 316L stainless steel laser-cladded coating on mild steel. International Journal of Advanced Manufacturing Technology, 117 (9-10), 2949-2958. doi: 10.1007/s00170-021-07886-7

Hot tear formation during the casting of Al–Zn binary alloys

Yang, Bing, Wu, Jianchun, Zeng, Yu, Liu, Jinyan, Yang, Nan, McGuckin, Damian, Chhor, Allen, StJohn, David, Dargusch, Matthew and Wang, Gui (2021). Hot tear formation during the casting of Al–Zn binary alloys. Advanced Engineering Materials, 26 (2) 2301471, 1-9. doi: 10.1002/adem.202301471

Quasi-static and fatigue properties of graded Ti–6Al–4V lattices produced by Laser Powder Bed Fusion (LPBF)

Soro, Nicolas, Saintier, Nicolas, Merzeau, Jonathan, Veidt, Martin and Dargusch, Matthew S. (2021). Quasi-static and fatigue properties of graded Ti–6Al–4V lattices produced by Laser Powder Bed Fusion (LPBF). Additive Manufacturing, 37 101653, 1-12. doi: 10.1016/j.addma.2020.101653

The characterisation and formation of novel microstructural features in a Ti−Nb−Zr−Mo−Sn alloy manufactured by Laser Engineered Net Shaping (LENS)

Zhu, Hanliang, Wang, Zhiyang, Muránsky, Ondrej, Davis, Joel, Yu, Sen, Kent, Damon, Wang, Gui and Dargusch, Matthew S. (2021). The characterisation and formation of novel microstructural features in a Ti−Nb−Zr−Mo−Sn alloy manufactured by Laser Engineered Net Shaping (LENS). Additive Manufacturing, 37 101705, 1-13. doi: 10.1016/j.addma.2020.101705

Versatile vanadium doping induces high thermoelectric performance in GeTe via band alignment and structural modulation

Sun, Qiang, Li, Meng, Shi, Xiao-lei, Xu, Shengduo, Liu, Weidi, Hong, Min, Lyv, Wan-yu, Yin, Yu, Dargusch, Matthew, Zou, Jin and Chen, Zhi-gang (2021). Versatile vanadium doping induces high thermoelectric performance in GeTe via band alignment and structural modulation. Advanced Energy Materials, 11 (20) 2100544, 1-9. doi: 10.1002/aenm.202100544

Tib nanowhisker reinforced titanium matrix composite with improved hardness for biomedical applications

Otte, Joseph A., Zou, Jin, Patel, Rushabh, Lu, Mingyuan and Dargusch, Matthew S. (2020). Tib nanowhisker reinforced titanium matrix composite with improved hardness for biomedical applications. Nanomaterials, 10 (12) 2480, 1-11. doi: 10.3390/nano10122480

What activates the Mg surface—a comparison of Mg dissolution mechanisms

Huang, Jufeng, Song, Guang-Ling, Atrens, Andrej and Dargusch, Matthew (2020). What activates the Mg surface—a comparison of Mg dissolution mechanisms. Journal of Materials Science and Technology, 57, 204-220. doi: 10.1016/j.jmst.2020.03.060

Challenges in laser-assisted milling of titanium alloys

Dargusch, Matthew S., Sivarupan, Tharmalingam, Bermingham, Michael, Rashid, Rizwan Abdul Rahman, Palanisamy, Suresh and Sun, Shoujin (2020). Challenges in laser-assisted milling of titanium alloys. International Journal of Extreme Manufacturing, 3 (1) 015001, 015001. doi: 10.1088/2631-7990/abc26b

In vivo evaluation of bioabsorbable Fe‐35Mn‐1Ag: first reports on in vivo hydrogen gas evolution in Fe‐based implants

Dargusch, Matthew Simon, Venezuela, Jeffrey, Dehghan‐Manshadi, Ali, Johnston, Sean, Yang, Nan, Mardon, Karine, Lau, Cora and Allavena, Rachel (2020). In vivo evaluation of bioabsorbable Fe‐35Mn‐1Ag: first reports on in vivo hydrogen gas evolution in Fe‐based implants. Advanced Healthcare Materials, 10 (2) 2000667, 2000667. doi: 10.1002/adhm.202000667

Influence of commercial corrosion‐inhibiting compounds on the atmospheric corrosion of the magnesium alloys EV31A, WE43B, ZE41A and pure magnesium

Soltan, Akif, Dargusch, Matthew S., Shi, Zhiming, Gerrard, Darren and Atrens, Andrej (2020). Influence of commercial corrosion‐inhibiting compounds on the atmospheric corrosion of the magnesium alloys EV31A, WE43B, ZE41A and pure magnesium. Materials and Corrosion, 72 (4) maco.202011979, 672-693. doi: 10.1002/maco.202011979

Biodegradable ternary Zn–3Ge–0.5X (X=Cu, Mg, and Fe) alloys for orthopedic applications

Lin, Jixing, Tong, Xian, Sun, Quanxiang, Luan, Yanan, Zhang, Dechuang, Shi, Zimu, Wang, Kun, Lin, Jianguo, Li, Yuncang, Dargusch, Matthew and Wen, Cuie (2020). Biodegradable ternary Zn–3Ge–0.5X (X=Cu, Mg, and Fe) alloys for orthopedic applications. Acta Biomaterialia, 115, 432-446. doi: 10.1016/j.actbio.2020.08.033

Enhancing antibacterial performance and biocompatibility of pure titanium by a two-step electrochemical surface coating

Yu, Sen, Guo, Dagang, Han, Jianye, Sun, Lijuan, Zhu, Hui, Yu, Zhentao, Dargusch, Matthew and Wang, Gui (2020). Enhancing antibacterial performance and biocompatibility of pure titanium by a two-step electrochemical surface coating. ACS Applied Materials and Interfaces, 12 (40), 44433-44446. doi: 10.1021/acsami.0c10032

Immunological response triggered by metallic 3D printing powders

Tang, J. C., Luo, J. P., Huang, Y. J., Sun, J. F., Zhu, Z. Y., Xu, J. Y., Dargusch, M. S. and Yan, M. (2020). Immunological response triggered by metallic 3D printing powders. Additive Manufacturing, 35 101392, 101392. doi: 10.1016/j.addma.2020.101392

Microstructure modification and corrosion resistance enhancement of die-cast Mg-Al-Re alloy by Sr alloying

Dargusch, Matthew S., Shi, Zhiming, Zhu, Hanliang, Atrens, Andrej and Song, Guang-Ling (2020). Microstructure modification and corrosion resistance enhancement of die-cast Mg-Al-Re alloy by Sr alloying. Journal of Magnesium and Alloys, 9 (3), 950-963. doi: 10.1016/j.jma.2020.09.008

Surface modification of biomedical Mg-Ca and Mg-Zn-Ca alloys using selective laser melting: corrosion behaviour, microhardness and biocompatibility

Yao, Xiyu, Tang, Jincheng, Zhou, Yinghao, Atrens, Andrej, Dargusch, Matthew S., Wiese, Bjoern, Ebel, Thomas and Yan, Ming (2020). Surface modification of biomedical Mg-Ca and Mg-Zn-Ca alloys using selective laser melting: corrosion behaviour, microhardness and biocompatibility. Journal of Magnesium and Alloys, 9 (6), 2155-2168. doi: 10.1016/j.jma.2020.08.011

Ultrahigh strain hardening in a transformation-induced plasticity and twinning-induced plasticity titanium alloy

Fu, Yu, Xiao, Wenlong, Kent, Damon, Dargusch, Matthew S., Wang, Junshuai, Zhao, Xinqing and Ma, Chaoli (2020). Ultrahigh strain hardening in a transformation-induced plasticity and twinning-induced plasticity titanium alloy. Scripta Materialia, 187, 285-290. doi: 10.1016/j.scriptamat.2020.06.029

Correction to: The Influence of In-Cavity Pressure on Heat Transfer and Porosity Formation During High-Pressure Die Casting of A380 Alloy

Dargusch, M. S., Hamasaiid, A., Dour, G., Balasubramani, N. and Stjohn, D. H. (2020). Correction to: The Influence of In-Cavity Pressure on Heat Transfer and Porosity Formation During High-Pressure Die Casting of A380 Alloy. JOM, 72 (11), 4148-4148. doi: 10.1007/s11837-020-04376-1

In situ crystal-amorphous compositing inducing ultrahigh thermoelectric performance of p-type Bi0.5Sb1.5Te3 hybrid thin films

Tan, Ming, Liu, Wei-Di, Shi, Xiao-Lei, Shang, Jin, Li, Hui, Liu, Xiaobiao, Kou, Liangzhi, Dargusch, Matthew, Deng, Yuan and Chen, Zhi-Gang (2020). In situ crystal-amorphous compositing inducing ultrahigh thermoelectric performance of p-type Bi0.5Sb1.5Te3 hybrid thin films. Nano Energy, 78 105379, 105379. doi: 10.1016/j.nanoen.2020.105379

The influence of in-cavity pressure on heat transfer and porosity formation during high-pressure die casting of A380 alloy

Dargusch, M. S., Hamasaaid, A., Dour, G., Balasubramani, N. and StJohn, D. H. (2020). The influence of in-cavity pressure on heat transfer and porosity formation during high-pressure die casting of A380 alloy. JOM, 72 (11), 3798-3805. doi: 10.1007/s11837-020-04341-y

A comparative study of the role of solute, potent particles and ultrasonic treatment during solidification of pure Mg, Mg–Zn and Mg–Zr alloys

Balasubramani, Nagasivamuni, Wang, Gui, Easton, Mark A., StJohn, David H. and Dargusch, Matthew S. (2020). A comparative study of the role of solute, potent particles and ultrasonic treatment during solidification of pure Mg, Mg–Zn and Mg–Zr alloys. Journal of Magnesium and Alloys, 9 (3), 829-839. doi: 10.1016/j.jma.2020.08.006

Additively manufactured biomedical Ti-Nb-Ta-Zr lattices with tunable Young's modulus: Mechanical property, biocompatibility, and proteomics analysis

Luo, J. P., Huang, Y. J., Xu, J. Y., Sun, J. F., Dargusch, M. S., Hou, C. H., Ren, L., Wang, R. Z., Ebel, T. and Yan, M. (2020). Additively manufactured biomedical Ti-Nb-Ta-Zr lattices with tunable Young's modulus: Mechanical property, biocompatibility, and proteomics analysis. Materials Science and Engineering C, 114 110903, 110903. doi: 10.1016/j.msec.2020.110903

Development of biodegradable Zn–1Mg–0.1RE (RE = Er, Dy, and Ho) alloys for biomedical applications

Tong, Xian, Zhang, Dechuang, Lin, Jixing, Dai, Yilong, Luan, Yanan, Sun, Quanxiang, Shi, Zimu, Wang, Kun, Gao, Yao, Lin, Jianguo, Li, Yuncang, Dargusch, Matthew and Wen, Cuie (2020). Development of biodegradable Zn–1Mg–0.1RE (RE = Er, Dy, and Ho) alloys for biomedical applications. Acta Biomaterialia, 117, 384-399. doi: 10.1016/j.actbio.2020.09.036

Role of germanium in microstructural development of powder metallurgy Ti-20Cr-xGe alloys

Sjafrizal, Teddy, Kent, Damon, Dehghan-Manshadi, Ali, Yan, Ming and S. Dargusch, Matthew (2020). Role of germanium in microstructural development of powder metallurgy Ti-20Cr-xGe alloys. Materials Letters, 274 127964, 127964. doi: 10.1016/j.matlet.2020.127964

Ultrahigh aspect ratio TiB nanowhisker-reinforced titanium matrix composites as lightweight and low-cost replacements for superalloys

Otte, Joseph A., Zou, Jin, Huang, Yang and Dargusch, Matthew S. (2020). Ultrahigh aspect ratio TiB nanowhisker-reinforced titanium matrix composites as lightweight and low-cost replacements for superalloys. ACS Applied Nano Materials, 3 (8), 8208-8215. doi: 10.1021/acsanm.0c01640

Thermoelectric generators: alternative power supply for wearable electrocardiographic systems

Dargusch, Matthew, Liu, Wei‐Di and Chen, Zhi‐Gang (2020). Thermoelectric generators: alternative power supply for wearable electrocardiographic systems. Advanced Science, 7 (18) 2001362, 2001362. doi: 10.1002/advs.202001362

SrTiO3-based thermoelectrics: progress and challenges

Shi, Xiao-Lei, Wu, Hao, Liu, Qingfeng, Zhou, Wei, Lu, Siyu, Shao, Zongping, Dargusch, Matthew and Chen, Zhi-Gang (2020). SrTiO3-based thermoelectrics: progress and challenges. Nano Energy, 78 105195, 1-30. doi: 10.1016/j.nanoen.2020.105195

Correction to: Challenges and Opportunities in the Selective Laser Melting of Biodegradable Metals for Load-Bearing Bone Scaffold Applications (Metallurgical and Materials Transactions A, (2020), 51, 7, (3311-3334), 10.1007/s11661-020-05796-z)

Carluccio, D., Demir, A. G., Bermingham, M. J. and Dargusch, M. S. (2020). Correction to: Challenges and Opportunities in the Selective Laser Melting of Biodegradable Metals for Load-Bearing Bone Scaffold Applications (Metallurgical and Materials Transactions A, (2020), 51, 7, (3311-3334), 10.1007/s11661-020-05796-z). Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (8), 4327-4328. doi: 10.1007/s11661-020-05829-7

High strength heat-treatable β-titanium alloy for additive manufacturing

Bermingham, M. J., Kent, D., Pace, B., Cairney, J. M. and Dargusch, M. S. (2020). High strength heat-treatable β-titanium alloy for additive manufacturing. Materials Science and Engineering A, 791 139646, 139646. doi: 10.1016/j.msea.2020.139646

Hydrogen embrittlement of an automotive 1700 MPa martensitic advanced high-strength steel

Venezuela, Jeffrey, Lim, Fang Yan, Liu, Li, James, Sonia, Zhou, Qingjun, Knibbe, Ruth, Zhang, Mingxing, Li, Huixing, Dong, Futao, Dargusch, Matthew S. and Atrens, Andrej (2020). Hydrogen embrittlement of an automotive 1700 MPa martensitic advanced high-strength steel. Corrosion Science, 171 108726, 108726. doi: 10.1016/j.corsci.2020.108726

Surface and morphological modification of selectively laser melted titanium lattices using a chemical post treatment

Soro, Nicolas, Saintier, Nicolas, Attar, Hooyar and Dargusch, Matthew S. (2020). Surface and morphological modification of selectively laser melted titanium lattices using a chemical post treatment. Surface and Coatings Technology, 393 125794, 1-11. doi: 10.1016/j.surfcoat.2020.125794

Challenges and opportunities in the selective laser melting of biodegradable metals for load-bearing bone scaffold applications

Carluccio, D., Demir, A. G., Bermingham, M. J. and Dargusch, M. S. (2020). Challenges and opportunities in the selective laser melting of biodegradable metals for load-bearing bone scaffold applications. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 51 (7), 3311-3334. doi: 10.1007/s11661-020-05796-z

Crystal symmetry induced structure and bonding manipulation boosting thermoelectric performance of GeTe

Li, Meng, Hong, Min, Tang, Xiao, Sun, Qiang, Lyu, Wan-Yu, Xu, Sheng-Duo, Kou, Liang-Zhi, Dargusch, Matthew, Zou, Jin and Chen, Zhi-Gang (2020). Crystal symmetry induced structure and bonding manipulation boosting thermoelectric performance of GeTe. Nano Energy, 73 104740, 104740. doi: 10.1016/j.nanoen.2020.104740

Grain refinement in laser remelted Mg-3Nd-1Gd-0.5Zr alloy

Zhang, Duyao, Qiu, Dong, Zhu, Suming, Dargusch, Matthew, StJohn, David and Easton, Mark (2020). Grain refinement in laser remelted Mg-3Nd-1Gd-0.5Zr alloy. Scripta Materialia, 183, 12-16. doi: 10.1016/j.scriptamat.2020.03.006

Additive manufacturing of low-cost porous titanium-based composites for biomedical applications: advantages, challenges and opinion for future development

Attar, Hooyar, Ehtemam-Haghighi, Shima, Soro, Nicolas, Kent, Damon and Dargusch, Matthew S. (2020). Additive manufacturing of low-cost porous titanium-based composites for biomedical applications: advantages, challenges and opinion for future development. Journal of Alloys and Compounds, 827 154263, 154263. doi: 10.1016/j.jallcom.2020.154263

A bacteria-triggered pH-responsive osteopotentiating coating on 3D-printed polyetheretherketone scaffolds for infective bone defect repair

Deng, Yi, Shi, Xiuyuan, Chen, Yong, Yang, Weizhong, Ma, Yuan, Shi, Xiao-Lei, Song, Pingan, Dargusch, Matthew S. and Chen, Zhi-Gang (2020). A bacteria-triggered pH-responsive osteopotentiating coating on 3D-printed polyetheretherketone scaffolds for infective bone defect repair. Industrial and Engineering Chemistry Research, 59 (26) acs.iecr.0c02107, 12123-12135. doi: 10.1021/acs.iecr.0c02107

Addressing the slow corrosion rate of biodegradable Fe-Mn: Current approaches and future trends

Venezuela, J. and Dargusch, M. S. (2020). Addressing the slow corrosion rate of biodegradable Fe-Mn: Current approaches and future trends. Current Opinion in Solid State and Materials Science, 24 (3) 100822, 100822. doi: 10.1016/j.cossms.2020.100822

Effect of process parameters on flexure strength and gas permeability of 3D printed sand molds

Sivarupan, Tharmalingam, El Mansori, Mohamed, Coniglio, Nicolas and Dargusch, Matthew (2020). Effect of process parameters on flexure strength and gas permeability of 3D printed sand molds. Journal of Manufacturing Processes, 54, 420-437. doi: 10.1016/j.jmapro.2020.02.043

Dynamic recrystallization of pure zinc during high strain-rate compression at ambient temperature

Liu, Shiyang, Kent, Damon, Zhan, Hongyi, Doan, Nghiem, Dargusch, Matthew and Wang, Gui (2020). Dynamic recrystallization of pure zinc during high strain-rate compression at ambient temperature. Materials Science and Engineering A, 784 139325, 139325. doi: 10.1016/j.msea.2020.139325

Smart manufacturing and DVSM based on an ontological approach

Huang, Zhuoyu, Jowers, Casey, Dargusch, Matthew S. and Dehghan-Manshadi, Ali (2020). Smart manufacturing and DVSM based on an ontological approach. Computers in Industry, 117 103189, 103189. doi: 10.1016/j.compind.2020.103189

Remelt processing and microstructure of selective laser melted Ti25Ta

Brodie, E. G., Medvedev, A. E., Frith, J. E., Dargusch, M. S., Fraser, H. L. and Molotnikov, A. (2020). Remelt processing and microstructure of selective laser melted Ti25Ta. Journal of Alloys and Compounds, 820 153082. doi: 10.1016/j.jallcom.2019.153082

Sintering and biocompatibility of blended elemental Ti-xNb alloys

Chen, Yunhui, Han, Pingping, Dehghan-Manshadi, Ali, Kent, Damon, Ehtemam-Haghighi, Shima, Jowers, Casey, Bermingham, Michael, Li, Tong, Cooper-White, Justin and Dargusch, Matthew S. (2020). Sintering and biocompatibility of blended elemental Ti-xNb alloys. Journal of the Mechanical Behavior of Biomedical Materials, 104 103691, 103691. doi: 10.1016/j.jmbbm.2020.103691

Titanium sponge as a source of native nuclei in titanium alloys

Tedman-Jones, S.N., Bermingham, M.J., McDonald, S.D., StJohn, D.H. and Dargusch, M.S. (2020). Titanium sponge as a source of native nuclei in titanium alloys. Journal of Alloys and Compounds, 818 153353, 153353. doi: 10.1016/j.jallcom.2019.153353

Metal injection moulding of surgical tools, biomaterials and medical devices: a review

Dehghan-Manshadi, Ali, Yu, Peng, Dargusch, Matthew, StJohn, David and Qian, Ma (2020). Metal injection moulding of surgical tools, biomaterials and medical devices: a review. Powder Technology, 364, 189-204. doi: 10.1016/j.powtec.2020.01.073

Activation of homogeneous precursors for formation of uniform and refined α precipitates in a high-strength β-Ti alloy

Xiao, Wenlong, Dargusch, Matthew S., Kent, Damon, Zhao, Xinqing and Ma, Chaoli (2020). Activation of homogeneous precursors for formation of uniform and refined α precipitates in a high-strength β-Ti alloy. Materialia, 9 100557, 100557. doi: 10.1016/j.mtla.2019.100557

Improved biodegradable magnesium alloys through advanced solidification processing

Dargusch, M.S., Balasubramani, N., Venezuela, J., Johnston, S., Wang, G., Lau, C., Bermingham, M., Kent, D. and StJohn, D.H. (2020). Improved biodegradable magnesium alloys through advanced solidification processing. Scripta Materialia, 177, 234-240. doi: 10.1016/j.scriptamat.2019.10.028

Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications

Carluccio, Danilo, Xu, Chun, Venezuela, Jeffrey, Cao, Yuxue, Kent, Damon, Bermingham, Michael, Demir, Ali Gökhan, Previtali, Barbara, Ye, Qingsong and Dargusch, Matthew (2020). Additively manufactured iron-manganese for biodegradable porous load-bearing bone scaffold applications. Acta Biomaterialia, 103, 346-360. doi: 10.1016/j.actbio.2019.12.018

Effect of Fe addition on properties of Ti–6Al-xFe manufactured by blended elemental process

Sjafrizal, Teddy, Dehghan-Manshadi, Ali, Kent, Damon, Yan, Ming and Dargusch, Matthew S. (2020). Effect of Fe addition on properties of Ti–6Al-xFe manufactured by blended elemental process. Journal of the Mechanical Behavior of Biomedical Materials, 102 103518, 103518. doi: 10.1016/j.jmbbm.2019.103518

Achieving ultralow surface roughness and high material removal rate in fused silica via a novel acid SiO2 slurry and its chemical-mechanical polishing mechanism

Shi, Xiao-Lei, Chen, Gaopan, Xu, Li, Kang, Chengxi, Luo, Guihai, Luo, Haimei, Zhou, Yan, Dargusch, Matthew S. and Pan, Guoshun (2020). Achieving ultralow surface roughness and high material removal rate in fused silica via a novel acid SiO2 slurry and its chemical-mechanical polishing mechanism. Applied Surface Science, 500 144041, 144041. doi: 10.1016/j.apsusc.2019.144041

Computation-guided design of high-performance flexible thermoelectric modules for sunlight-to-electricity conversion

Xu, Shengduo, Hong, Min, Shi, Xiao-Lei, Li, Meng, Sun, Qiang, Chen, Qixiang, Dargusch, Matthew, Zou, Jin and Chen, Zhi-Gang (2020). Computation-guided design of high-performance flexible thermoelectric modules for sunlight-to-electricity conversion. Energy and Environmental Science, 13 (10), 3480-3488. doi: 10.1039/d0ee01895c

Selective laser melting Fe and Fe-35Mn for biodegradable implants

Carluccio, Danilo, Bermingham, Michael, Dargusch, M. S., Demir, Ali Gökhan, Caprio, Leonardo and Previtali, Barbara (2020). Selective laser melting Fe and Fe-35Mn for biodegradable implants. International Journal of Modern Physics B, 34 (1-3) 2040034. doi: 10.1142/S0217979220400342

Effect of clad orientation on the mechanical properties of laser-clad repaired ultra-high strength 300 M steel

Rahman Rashid, R. A., Barr, C. J., Palanisamy, S., Nazari, K. A., Orchowski, N., Matthews, N. and Dargusch, M. S. (2019). Effect of clad orientation on the mechanical properties of laser-clad repaired ultra-high strength 300 M steel. Surface and Coatings Technology, 380 125090, 125090. doi: 10.1016/j.surfcoat.2019.125090

Corrosion of Mg alloys EV31A, WE43B, and ZE41A in chloride‐ and sulfate‐containing solutions saturated with magnesium hydroxide

Soltan, Akif, Dargusch, Matthew S., Shi, Zhiming, Gerrard, Darren, Al Shabibi, Sulaiman, Kuo, Yu‐Chieh and Atrens, Andrej (2019). Corrosion of Mg alloys EV31A, WE43B, and ZE41A in chloride‐ and sulfate‐containing solutions saturated with magnesium hydroxide. Materials and Corrosion, 71 (6) maco.201911375, 956-979. doi: 10.1002/maco.201911375

Properties of powder metallurgy-fabricated oxygen-containing beta Ti-Nb-Mo-Sn-Fe alloys for biomedical applications

Dehghan-Manshadi, Ali, Kent, Damon, StJohn, David and Dargusch, Matthew (2019). Properties of powder metallurgy-fabricated oxygen-containing beta Ti-Nb-Mo-Sn-Fe alloys for biomedical applications. Advanced Engineering Materials, 22 (3) 1901229, 1901229. doi: 10.1002/adem.201901229

The poisoning effect of Al and Be on Mg—1 wt.% Zr alloy and the role of ultrasonic treatment on grain refinement

Balasubramani, Nagasivamuni, Wang, Gui, StJohn, David H. and Dargusch, Matthew S. (2019). The poisoning effect of Al and Be on Mg—1 wt.% Zr alloy and the role of ultrasonic treatment on grain refinement. Frontiers in Materials, 6 322. doi: 10.3389/fmats.2019.00322

The impact of the casting thickness on the interfacial heat transfer and solidification of the casting during permanent mold casting of an A356 alloy

Hamasaiid, A., Dargusch, M. S. and Dour, G. (2019). The impact of the casting thickness on the interfacial heat transfer and solidification of the casting during permanent mold casting of an A356 alloy. Journal of Manufacturing Processes, 47, 229-237. doi: 10.1016/j.jmapro.2019.09.039

The role of ultrasonically induced acoustic streaming in developing fine equiaxed grains during the solidification of an Al-2 Pct Cu alloy

Wang, Gui, Wang, Qiang, Balasubramani, Nagasivamuni, Qian, Ma, Eskin, Dmitry G., Dargusch, Matthew S. and Stjohn, David H. (2019). The role of ultrasonically induced acoustic streaming in developing fine equiaxed grains during the solidification of an Al-2 Pct Cu alloy. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 50A (11), 5253-5263. doi: 10.1007/s11661-019-05448-x

In- situ observation of the continuous phase transition in determining the high thermoelectric performance of polycrystalline Sn0.98Se

Dargusch, Matthew, Shi, Xiao-Lei, Tran, Xuan Quy, Feng, Tianli, Somidin, Flora, Tan, Xin, Liu, Weidi, Jack, Kevin, Venezuela, Jeffrey, Maeno, Hiroshi, Toriyama, Takaaki, Matsumura, Syo, Pantelides, Sokrates T. and Chen, Zhi-Gang (2019). In- situ observation of the continuous phase transition in determining the high thermoelectric performance of polycrystalline Sn0.98Se. Journal of Physical Chemistry Letters, 10 (21), 6512-6517. doi: 10.1021/acs.jpclett.9b02818

Comparison of the microstructure and biocorrosion properties of additively manufactured and conventionally fabricated near β Ti–25Nb–3Zr–3Mo–2Sn alloy

Dargusch, Matthew S., Wang, Gui, Kent, Damon, Bermingham, Michael, Venezuela, Jeffrey, Frith, Jessica E., Yu, Zhentao, Yu, Sen and Shi, Zhiming (2019). Comparison of the microstructure and biocorrosion properties of additively manufactured and conventionally fabricated near β Ti–25Nb–3Zr–3Mo–2Sn alloy. ACS Biomaterials Science and Engineering, 5 (11) acsbiomaterials.9b00596, 5844-5856. doi: 10.1021/acsbiomaterials.9b00596

Ultrasonic processing for structure refinement: an overview of mechanisms and application of the interdependence theory

Balasubramani, Nagasivamuni, StJohn, David, Dargusch, Matthew and Wang, Gui (2019). Ultrasonic processing for structure refinement: an overview of mechanisms and application of the interdependence theory. Materials, 12 (19) 3187, 3187. doi: 10.3390/ma12193187

Absorbable Mg surgical tack: proof of concept and in situ fixation strength

Johnston, Sean, Lau, Cora, Dargusch, Matthew S. and Atrens, Andrej (2019). Absorbable Mg surgical tack: proof of concept and in situ fixation strength. Journal of the Mechanical Behavior of Biomedical Materials, 97, 321-329. doi: 10.1016/j.jmbbm.2019.05.035

Composition of the nanosized orthorhombic O′ phase and its direct transformation to fine α during ageing in metastable β-Ti alloys

Li, Tong, Lai, Minjie, Kostka, Aleksander, Salomon, Steffen, Zhang, Siyuan, Somsen, Christoph, Dargusch, Matthew S. and Kent, Damon (2019). Composition of the nanosized orthorhombic O′ phase and its direct transformation to fine α during ageing in metastable β-Ti alloys. Scripta Materialia, 170, 183-188. doi: 10.1016/j.scriptamat.2019.06.008

Evaluation of the mechanical compatibility of additively manufactured porous Ti–25Ta alloy for load-bearing implant applications

Soro, Nicolas, Attar, Hooyar, Brodie, Erin, Veidt, Martin, Molotnikov, Andrey and Dargusch, Matthew S. (2019). Evaluation of the mechanical compatibility of additively manufactured porous Ti–25Ta alloy for load-bearing implant applications. Journal of the Mechanical Behavior of Biomedical Materials, 97, 149-158. doi: 10.1016/j.jmbbm.2019.05.019

Review of the atmospheric corrosion of magnesium alloys

Liu, Hongguang, Cao, Fuyong, Song, Guang-Ling, Zheng, Dajiang, Shi, Zhiming, Dargusch, Mathew S. and Atrens, Andrej (2019). Review of the atmospheric corrosion of magnesium alloys. Journal of Materials Science and Technology, 35 (9), 2003-2016. doi: 10.1016/j.jmst.2019.05.001

Effect of laser reheat post-treatment on the microstructural characteristics of laser-cladded ultra-high strength steel

Rahman Rashid, R. A., Nazari, K. A., Barr, C., Palanisamy, S., Orchowski, N., Matthews, N. and Dargusch, M. S. (2019). Effect of laser reheat post-treatment on the microstructural characteristics of laser-cladded ultra-high strength steel. Surface and Coatings Technology, 372, 93-102. doi: 10.1016/j.surfcoat.2019.05.021

A new approach to nuclei identification and grain refinement in titanium alloys

Tedman-Jones, S. N., McDonald, S. D., Bermingham, M. J., StJohn, D. H. and Dargusch, M. S. (2019). A new approach to nuclei identification and grain refinement in titanium alloys. Journal of Alloys and Compounds, 794, 268-284. doi: 10.1016/j.jallcom.2019.04.224

Flexible thermoelectric materials and generators: challenges and innovations

Wang, Yuan, Yang, Lei, Shi, Xiao‐Lei, Shi, Xun, Chen, Lidong, Dargusch, Matthew S., Zou, Jin and Chen, Zhi‐Gang (2019). Flexible thermoelectric materials and generators: challenges and innovations. Advanced Materials, 31 (29) 1807916, e1807916. doi: 10.1002/adma.201807916

High-performance PEDOT:PSS flexible thermoelectric materials and their devices by triple post-treatments

Xu, Shengduo, Hong, Min, Shi, Xiao-Lei, Wang, Yuan, Ge, Lei, Bai, Yang, Wang, Lianzhou, Dargusch, Matthew, Zou, Jin and Chen, Zhi-Gang (2019). High-performance PEDOT:PSS flexible thermoelectric materials and their devices by triple post-treatments. Chemistry of Materials, 31 (14) acs.chemmater.9b01500, 5238-5244. doi: 10.1021/acs.chemmater.9b01500

Evaluation of the mechanical and wear properties of titanium produced by three different additive manufacturing methods for biomedical application

Attar, H., Bermingham, M. J., Ehtemam-Haghighi, S., Dehghan-Manshadi, A., Kent, D. and Dargusch, M. S. (2019). Evaluation of the mechanical and wear properties of titanium produced by three different additive manufacturing methods for biomedical application. Materials Science and Engineering: A, 760, 339-345. doi: 10.1016/j.msea.2019.06.024

The prospects for biodegradable zinc in wound closure applications

Venezuela, Jeffrey Jones D., Johnston, Sean and Dargusch, Matthew Simon (2019). The prospects for biodegradable zinc in wound closure applications. Advanced Healthcare Materials, 8 (16) 1900408, 1900408. doi: 10.1002/adhm.201900408

Comparative study of pure iron manufactured by selective laser melting, laser metal deposition, and casting processes

Carluccio, Danilo, Bermingham, Michael, Kent, Damon, Demir, Ali Gökhan, Previtali, Barbara and Dargusch, Matthew S. (2019). Comparative study of pure iron manufactured by selective laser melting, laser metal deposition, and casting processes. Advanced Engineering Materials, 21 (7) adem.201900049, 1900049. doi: 10.1002/adem.201900049

Industry 4.0: Development of a multi-agent system for dynamic value stream mapping in SMEs

Huang, Zhuoyu, Kim, Jiwon, Sadri, Alireza, Dowey, Steve and Dargusch, Matthew S. (2019). Industry 4.0: Development of a multi-agent system for dynamic value stream mapping in SMEs. Journal of Manufacturing Systems, 52, 1-12. doi: 10.1016/j.jmsy.2019.05.001

Reduced consumption of materials and hazardous chemicals for energy efficient production of metal parts through 3D printing of sand molds

Sivarupan, Tharmalingam, Upadhyay, Meet, Ali, Yahia, El Mansori, Mohamed and Dargusch, Matthew S. (2019). Reduced consumption of materials and hazardous chemicals for energy efficient production of metal parts through 3D printing of sand molds. Journal of Cleaner Production, 224, 411-420. doi: 10.1016/j.jclepro.2019.03.158

Tensile properties and fracture behaviour of biodegradable iron–manganese scaffolds produced by powder sintering

Dehghan-Manshadi, A., StJohn, D. H. and Dargusch, M. S. (2019). Tensile properties and fracture behaviour of biodegradable iron–manganese scaffolds produced by powder sintering. Materials, 12 (10) 1572, 1572. doi: 10.3390/ma12101572

Understanding the corrosion behaviour of the magnesium alloys EV31A, WE43B, and ZE41A

Soltan, Akif, Dargusch, Matthew S., Shi, Zhiming, Gerrard, Darren and Atrens, Andrej (2019). Understanding the corrosion behaviour of the magnesium alloys EV31A, WE43B, and ZE41A. Materials and Corrosion, 70 (9) maco.201910845, 1527-1552. doi: 10.1002/maco.201910845

Effect of ultrasonic treatment on the alloying and grain refinement efficiency of a Mg – Zr master alloy added to magnesium at hypo- and hyper-peritectic compositions

Nagasivamuni, B., Wang, Gui, St John, David H. and Dargusch, Matthew S. (2019). Effect of ultrasonic treatment on the alloying and grain refinement efficiency of a Mg – Zr master alloy added to magnesium at hypo- and hyper-peritectic compositions. Journal of Crystal Growth, 512, 20-32. doi: 10.1016/j.jcrysgro.2019.02.004

Investigating Mg Biocorrosion In Vitro: Lessons Learned and Recommendations

Johnston, Sean, Shi, Zhiming, Venezuela, Jeffrey, Wen, Cuie, Dargusch, Matthew S. and Atrens, Andrej (2019). Investigating Mg Biocorrosion In Vitro: Lessons Learned and Recommendations. JOM, 71 (4), 1406-1413. doi: 10.1007/s11837-019-03327-9

Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing

Bermingham, M. J., StJohn, D. H., Krynen, J., Tedman-Jones, S. and Dargusch, M. S. (2019). Promoting the columnar to equiaxed transition and grain refinement of titanium alloys during additive manufacturing. Acta Materialia, 168, 261-274. doi: 10.1016/j.actamat.2019.02.020

The influence of laser processing parameters on the densification and surface morphology of pure Fe and Fe-35Mn scaffolds produced by selective laser melting

Carluccio, D., Demir, A. G., Caprio, L., Previtali, B., Bermingham, M. J. and Dargusch, M. S. (2019). The influence of laser processing parameters on the densification and surface morphology of pure Fe and Fe-35Mn scaffolds produced by selective laser melting. Journal of Manufacturing Processes, 40, 113-121. doi: 10.1016/j.jmapro.2019.03.018

Investigating the morphological effects of solute on the β-phase in as-cast titanium alloys

Tedman-Jones, S.N., McDonald, S.D., Bermingham, M.J., St John, D.H. and Dargusch, M.S. (2019). Investigating the morphological effects of solute on the β-phase in as-cast titanium alloys. Journal of Alloys and Compounds, 778, 204-214. doi: 10.1016/j.jallcom.2018.11.063

The Influence of Alloying and Fabrication Techniques on the Mechanical Properties, Biodegradability and Biocompatibility of Zinc: A Comprehensive Review

Venezuela, J. and Dargusch, M.S. (2019). The Influence of Alloying and Fabrication Techniques on the Mechanical Properties, Biodegradability and Biocompatibility of Zinc: A Comprehensive Review. Acta Biomaterialia, 87, 1-40. doi: 10.1016/j.actbio.2019.01.035

Effects of deformation twinning on the mechanical properties of biodegradable Zn-Mg alloys

Liu, Shiyang, Kent, Damon, Doan, Nghiem, Dargusch, Matthew and Wang, Gui (2019). Effects of deformation twinning on the mechanical properties of biodegradable Zn-Mg alloys. Bioactive Materials, 4 (1), 8-16. doi: 10.1016/j.bioactmat.2018.11.001

Progressive damage and elastic-plastic behavior of CF/Al composites during transverse tensile process

Wang, Zhen-Jun, Tian, Liang, Cai, Chang-Chun, Yu, Huan, Xu, Zhi-Feng, Wang, Gui and Dargusch, Matthew S. (2019). Progressive damage and elastic-plastic behavior of CF/Al composites during transverse tensile process. Zhongguo Youse Jinshu Xuebao, 29 (3), 458-466. doi: 10.19476/j.ysxb.1004.0609.2019.03.04

Real-time observation of the temperature-induced phase transformation in GeTe and its thermal expansion properties

Tran, Xuan Quy, Hong, Min, Maeno, Hiroshi, Kawami, Youichirou, Toriyama, Takaaki, Jack, Kevin, Chen, Zhi-Gang, Zou, Jin, Matsumura, Syo and Dargusch, Matthew S. (2019). Real-time observation of the temperature-induced phase transformation in GeTe and its thermal expansion properties. Acta Materialia, 165, 327-335. doi: 10.1016/j.actamat.2018.11.059

Investigation of the structure and mechanical properties of additively manufactured Ti-6Al-4V biomedical scaffolds designed with a Schwartz primitive unit-cell

Soro, Nicolas, Attar, Hooyar, Wu, Xinhua and Dargusch, Matthew S. (2019). Investigation of the structure and mechanical properties of additively manufactured Ti-6Al-4V biomedical scaffolds designed with a Schwartz primitive unit-cell. Materials Science and Engineering: A, 745, 195-202. doi: 10.1016/j.msea.2018.12.104

A biocompatible thermoset polymer binder for Direct Ink Writing of porous titanium scaffolds for bone tissue engineering

Chen, Yunhui, Han, Pingping, Vandi, Luigi-Jules, Dehghan-Manshadi, Ali, Humphry, Jarrad, Kent, Damon, Stefani, Ilaria, Lee, Peter, Heitzmann, Michael, Cooper-White, Justin and Dargusch, Matthew (2019). A biocompatible thermoset polymer binder for Direct Ink Writing of porous titanium scaffolds for bone tissue engineering. Materials Science and Engineering: C, 95, 160-165. doi: 10.1016/j.msec.2018.10.033

Microstructure, phase composition and mechanical properties of new, low cost Ti-Mn-Nb alloys for biomedical applications

Ehtemam-Haghighi, Shima, Attar, Hooyar, Dargusch, Matthew S. and Kent, Damon (2019). Microstructure, phase composition and mechanical properties of new, low cost Ti-Mn-Nb alloys for biomedical applications. Journal of Alloys and Compounds, 787, 570-577. doi: 10.1016/j.jallcom.2019.02.116

Akermanite reinforced PHBV scaffolds manufactured using selective laser sintering

Diermann, Sven H., Lu, Mingyuan, Dargusch, Matthew, Grøndahl, Lisbeth and Huang, Han (2019). Akermanite reinforced PHBV scaffolds manufactured using selective laser sintering. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 107 (8) jbm.b.34349, 2596-2610. doi: 10.1002/jbm.b.34349

Exploring the role of manganese on the microstructure, mechanical properties, biodegradability and biocompatibility of porous iron-based scaffolds

Dargusch, Matthew, Dehghan-Manshadi, Ali, Shahbazi, Mahboobeth, Venezuela, Jeffrey, Tran, Xuan, Song, Jing, Liu, Na, Xu, Chun, Ye, Qingsong and Wen, Cuie (2019). Exploring the role of manganese on the microstructure, mechanical properties, biodegradability and biocompatibility of porous iron-based scaffolds. ACS Biomaterials Science and Engineering, 5 (4) acsbiomaterials.8b01497, 1686-1702. doi: 10.1021/acsbiomaterials.8b01497

Exploring the underlying mechanisms behind the increased far infrared radiation properties of perovskite-type Ce/Mn co-doped ceramics

Deng, Yi, Zhang, Kewei, Shi, Xiuyuan, Dong, Taosheng, Yang, Lei, Yang, Weizhong, Hong, Min, Wang, Yuan, Dargusch, Matthew and Chen, Zhi-Gang (2019). Exploring the underlying mechanisms behind the increased far infrared radiation properties of perovskite-type Ce/Mn co-doped ceramics. Materials Research Bulletin, 109, 233-239. doi: 10.1016/j.materresbull.2018.09.042

In vitro degradation of a unique porous PHBV scaffold manufactured using selective laser sintering

Diermann, Sven H., Lu, Mingyuan, Edwards, Grant, Dargusch, Matthew and Huang, Han (2019). In vitro degradation of a unique porous PHBV scaffold manufactured using selective laser sintering. Journal of Biomedical Materials Research - Part A, 107 (1), 154-162. doi: 10.1002/jbm.a.36543

The influence of microstructure on the hydrogen embrittlement susceptibility of martensitic advanced high strength steels

Venezuela, Jeffrey, Zhou, Qingjun, Liu, Qinglong, Li, Huixing, Zhang, Mingxing, Dargusch, Matthew S. and Atrens, Andrej (2018). The influence of microstructure on the hydrogen embrittlement susceptibility of martensitic advanced high strength steels. Materials Today Communications, 17, 1-14. doi: 10.1016/j.mtcomm.2018.07.011

Biocompatible porous titanium scaffolds produced using a novel space holder technique

Chen, Yunhui, Frith, Jessica Ellen, Dehghan-Manshadi, Ali, Kent, Damon, Bermingham, Michael and Dargusch, Matthew (2018). Biocompatible porous titanium scaffolds produced using a novel space holder technique. Journal of Biomedical Materials Research. Part B, Applied Biomaterials, 106 (8), 2796-2806. doi: 10.1002/jbm.b.34060

Evolution of the as-cast grain microstructure of an ultrasonically treated Al–2Cu alloy

Wang, Gui, Croaker, Paul, Dargusch, Matthew, McGuckin, Damian and StJohn, David (2018). Evolution of the as-cast grain microstructure of an ultrasonically treated Al–2Cu alloy. Advanced Engineering Materials, 20 (11) 1800521, 1800521. doi: 10.1002/adem.201800521

Ultrasonic Processing of Aluminum–Magnesium Alloys

Mills, Kurt, Wang, Gui, St John, David and Dargusch, Matthew (2018). Ultrasonic Processing of Aluminum–Magnesium Alloys. Materials, 11 (10) 1994, 1994. doi: 10.3390/ma11101994

A novel Ti-Fe composite coating deposited using laser cladding of low cost recycled nano-crystalline titanium powder

Nazari, Keivan A., Rahman Rashid, R.A., Palanisamy, S., Xia, K. and Dargusch, M.S. (2018). A novel Ti-Fe composite coating deposited using laser cladding of low cost recycled nano-crystalline titanium powder. Materials Letters, 229, 301-304. doi: 10.1016/j.matlet.2018.07.038

Grain refinement of laser remelted Al-7Si and 6061 aluminium alloys with Tibor® and scandium additions

Carluccio, D., Bermingham, M. J., Zhang, Y., StJohn, D. H., Yang, K., Rometsch, P. A., Wu, X. and Dargusch, M. S. (2018). Grain refinement of laser remelted Al-7Si and 6061 aluminium alloys with Tibor® and scandium additions. Journal of Manufacturing Processes, 35, 715-720. doi: 10.1016/j.jmapro.2018.08.030

Metallurgical features of direct laser-deposited Ti6Al4V with trace boron

Rahman Rashid, R. A., Palanisamy, S., Attar, H., Bermingham, M. and Dargusch, M. S. (2018). Metallurgical features of direct laser-deposited Ti6Al4V with trace boron. Journal of Manufacturing Processes, 35, 651-656. doi: 10.1016/j.jmapro.2018.09.018

Nucleation driving force for omega-assisted formation of alpha and associated omega morphology in beta-Ti alloys

Li, Tong, Kent, Damon, Sha, Gang, Liu, Hongwei, Fries, Suzana G., Ceguerra, Anna V., Dargusch, Matthew S. and Cairney, Julie M. (2018). Nucleation driving force for omega-assisted formation of alpha and associated omega morphology in beta-Ti alloys. Scripta Materialia, 155, 149-154. doi: 10.1016/j.scriptamat.2018.06.039

Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: a review

Attar, Hooyar, Ehtemam-Haghighi, Shima, Kent, Damon and Dargusch, Matthew S. (2018). Recent developments and opportunities in additive manufacturing of titanium-based matrix composites: a review. International Journal of Machine Tools and Manufacture, 133, 85-102. doi: 10.1016/j.ijmachtools.2018.06.003

Insights into machining of a β titanium biomedical alloy from chip microstructures

Kent, Damon, Rahman Rashid, Rizwan, Bermingham, Michael, Attar, Hooyar, Sun, Shoujin and Dargusch, Matthew (2018). Insights into machining of a β titanium biomedical alloy from chip microstructures. Metals, 8 (9) 710, 710. doi: 10.3390/met8090710

Erratum to: Building towards a standardised approach to biocorrosion studies: a review of factors influencing Mg corrosion in vitro pertinent to in vivo corrosion (vol 61, pg 475, 2018)

Johnston, Sean, Dargusch, Matthew and Atrens, Andrej (2018). Erratum to: Building towards a standardised approach to biocorrosion studies: a review of factors influencing Mg corrosion in vitro pertinent to in vivo corrosion (vol 61, pg 475, 2018). Science China Materials, 61 (9), 1248-1248. doi: 10.1007/s40843-018-9310-6

Porous titanium scaffolds fabricated by metal injection moulding for biomedical applications

Dehghan-Manshadi, Ali, Chen, Yunhui, Shi, Zhiming, Bermingham, Michael, StJohn, David, Dargusch, Matthew and Qian, Ma (2018). Porous titanium scaffolds fabricated by metal injection moulding for biomedical applications. Materials, 11 (9) 1573, 1573. doi: 10.3390/ma11091573

Trace carbon addition to refine microstructure and enhance properties of additive-manufactured Ti-6Al-4V

Mereddy, S., Bermingham, M. J., Kent, D., Dehghan-Manshadi, A., Stjohn, D. H. and Dargusch, M. S. (2018). Trace carbon addition to refine microstructure and enhance properties of additive-manufactured Ti-6Al-4V. JOM, 70 (9), 1670-1676. doi: 10.1007/s11837-018-2994-x

Viewpoint - understanding Mg corrosion in the body for biodegradable medical implants

Atrens, Andrej, Johnston, Sean, Shi, Zhiming and Dargusch, Matthew S. (2018). Viewpoint - understanding Mg corrosion in the body for biodegradable medical implants. Scripta Materialia, 154, 92-100. doi: 10.1016/j.scriptamat.2018.05.021

Sensitivity of Ti-6Al-4V components to oxidation during out of chamber Wire + Arc Additive Manufacturing

Bermingham, M. J., Thomson-Larkins, J., St John, D. H. and Dargusch, M. S. (2018). Sensitivity of Ti-6Al-4V components to oxidation during out of chamber Wire + Arc Additive Manufacturing. Journal of Materials Processing Technology, 258, 29-37. doi: 10.1016/j.jmatprotec.2018.03.014

Synthesis, microstructure, and mechanical behaviour of a unique porous PHBV scaffold manufactured using selective laser sintering

Diermann, Sven H., Lu, Mingyuan, Zhao, Yitian, Vandi, Luigi-Jules, Dargusch, Matthew and Huang, Han (2018). Synthesis, microstructure, and mechanical behaviour of a unique porous PHBV scaffold manufactured using selective laser sintering. Journal of the Mechanical Behavior of Biomedical Materials, 84, 151-160. doi: 10.1016/j.jmbbm.2018.05.007

Heterogeneous nucleation of pure Al on MgO single crystal substrate accompanied by a MgAl2O4 buffer layer

Sun, Jie, Wang, Dingpu, Zhang, Yunhu, Sheng, Cheng, Dargusch, Matthew, Wang, Gui, St John, David and Zhai, Qijie (2018). Heterogeneous nucleation of pure Al on MgO single crystal substrate accompanied by a MgAl2O4 buffer layer. Journal of Alloys and Compounds, 753, 543-550. doi: 10.1016/j.jallcom.2018.04.263

Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments

Bermingham, M. J., Nicastro, L., Kent, D., Chen, Y. and Dargusch, M. S. (2018). Optimising the mechanical properties of Ti-6Al-4V components produced by wire + arc additive manufacturing with post-process heat treatments. Journal of Alloys and Compounds, 753, 247-255. doi: 10.1016/j.jallcom.2018.04.158

Dual Ag/ZnO-decorated micro-/nanoporous sulfonated polyetheretherketone with superior antibacterial capability and biocompatibility via layer-by-layer self-assembly strategy

Deng, Yi, Yang, Lei, Huang, Xiaobing, Chen, Junhong, Shi, Xiuyuan, Yang, Weizhong, Hong, Min, Wang, Yuan, Dargusch, Matthew S and Chen, Zhi-Gang (2018). Dual Ag/ZnO-decorated micro-/nanoporous sulfonated polyetheretherketone with superior antibacterial capability and biocompatibility via layer-by-layer self-assembly strategy. Macromolecular Bioscience, 18 (7) 1800028, e1800028. doi: 10.1002/mabi.201800028

Finite element analysis of porous commercially pure titanium for biomedical implant application

Soro, Nicolas, Brassart, Laurence, Chen, Yunhui, Veidt, Martin, Attar, Hooyar and Dargusch, Matthew S. (2018). Finite element analysis of porous commercially pure titanium for biomedical implant application. Materials Science and Engineering A, 725, 43-50. doi: 10.1016/j.msea.2018.04.009

Metal alloys for fusion-based additive manufacturing

Zhang, Duyao, Sun, Shoujin, Qiu, Dong, Gibson, Mark A., Dargusch, Matthew S., Brandt, Milan, Qian, Ma and Easton, Mark (2018). Metal alloys for fusion-based additive manufacturing. Advanced Engineering Materials, 20 (5) 1700952, 1700952. doi: 10.1002/adem.201700952

The effect of ultrasonic treatment on the mechanisms of grain formation of as-cast high purity zinc

Nagasivamuni, B., Wang, Gui, StJohn, David H. and Dargusch, Matthew S. (2018). The effect of ultrasonic treatment on the mechanisms of grain formation of as-cast high purity zinc. Journal of Crystal Growth, 495, 20-28. doi: 10.1016/j.jcrysgro.2018.05.006

A reliable and highly efficient exfoliation method for water-dispersible MoS2 nanosheet

Yu, Hua, Zhu, Hanliang, Dargusch, Matthew and Huang, Yuelong (2018). A reliable and highly efficient exfoliation method for water-dispersible MoS2 nanosheet. Journal of Colloid and Interface Science, 514, 642-647. doi: 10.1016/j.jcis.2018.01.006

Realizing zT of 2.3 in Ge1-x-y Sbx Iny Te via reducing the phase-transition temperature and introducing resonant energy doping

Hong, Min, Chen, Zhi-Gang, Yang, Lei, Zou, Yi-Chao, Dargusch, Matthew S, Wang, Hao and Zou, Jin (2018). Realizing zT of 2.3 in Ge1-x-y Sbx Iny Te via reducing the phase-transition temperature and introducing resonant energy doping. Advanced Materials, 30 (11) 1705942. doi: 10.1002/adma.201705942

Effect of trace lanthanum hexaboride and boron additions on microstructure, tensile properties and anisotropy of Ti-6Al-4V produced by additive manufacturing

Bermingham, M. J., McDonald, S. D. and Dargusch, M. S. (2018). Effect of trace lanthanum hexaboride and boron additions on microstructure, tensile properties and anisotropy of Ti-6Al-4V produced by additive manufacturing. Materials Science and Engineering A, 719, 1-11. doi: 10.1016/j.msea.2018.02.012

A state-of-the-art review on passivation and biofouling of Ti and its alloys in marine environments

Yan, Shaokun, Song, Guang-Ling, Li, Zhengxian, Wang, Haonan, Zheng, Dajiang, Cao, Fuyong, Horynova, Miroslava, Dargusch, Matthew S. and Zhou, Lian (2018). A state-of-the-art review on passivation and biofouling of Ti and its alloys in marine environments. Journal of Materials Science and Technology, 34 (3), 421-435. doi: 10.1016/j.jmst.2017.11.021

High performance thermoelectric materials: Progress and their applications

Yang, Lei, Chen, Zhi-Gang, Dargusch, Matthew S. and Zou, Jin (2018). High performance thermoelectric materials: Progress and their applications. Advanced Energy Materials, 8 (6) 1701797, 1701797. doi: 10.1002/aenm.201701797

Precipitation of string-shaped morphologies consisting of aligned α phase in a metastable β titanium alloy

Zhan, Hongyi, Ceguerra, Anna, Wang, Gui, Cairney, Julie and Dargusch, Matthew (2018). Precipitation of string-shaped morphologies consisting of aligned α phase in a metastable β titanium alloy. Scientific Reports, 8 (1) 2038, 2038. doi: 10.1038/s41598-018-20386-1

A Novel Hydrogel Surface Grafted With Dual Functional Peptides for Sustaining Long-Term Self-Renewal of Human Induced Pluripotent Stem Cells and Manipulating Their Osteoblastic Maturation

Deng, Yi, Wei, Shicheng, Yang, Lei, Yang, Weizhong, Dargusch, Matthew S. and Chen, Zhi-Gang (2018). A Novel Hydrogel Surface Grafted With Dual Functional Peptides for Sustaining Long-Term Self-Renewal of Human Induced Pluripotent Stem Cells and Manipulating Their Osteoblastic Maturation. Advanced Functional Materials, 28 (11) 1705546, 1705546. doi: 10.1002/adfm.201705546

Double-layered microsphere based dual growth factor delivery system for guided bone regeneration

Xu, Chun, Xu, Jia, Xiao, Lan, Li, Zhihao, Xiao, Yin, Dargusch, Matthew, Lei, Chang, He, Yan and Ye, Qingsong (2018). Double-layered microsphere based dual growth factor delivery system for guided bone regeneration. RSC Advances, 8 (30), 16503-16512. doi: 10.1039/c8ra02072h

Failure Modes in Hybrid Titanium Composite Laminates

Reiner, Johannes, Veidt, Martin and Dargusch, Matthew (2018). Failure Modes in Hybrid Titanium Composite Laminates. Journal of Engineering Materials and Technology, 140 (1) 011005, 011005. doi: 10.1115/1.4037273

Building towards a standardised approach to biocorrosion studies: a review of factors influencing Mg corrosion in vitro pertinent to in vivo corrosion 建立一个生物腐蚀研究的标准化方法:与体内腐蚀相关的体外镁腐蚀影响因素综述

Johnston, Sean, Dargusch, Matthew and Atrens, Andrej (2017). Building towards a standardised approach to biocorrosion studies: a review of factors influencing Mg corrosion in vitro pertinent to in vivo corrosion 建立一个生物腐蚀研究的标准化方法:与体内腐蚀相关的体外镁腐蚀影响因素综述. Science China Materials, 61 (4), 475-500. doi: 10.1007/s40843-017-9173-7

Granular nanostructure: a facile biomimetic strategy for the design of supertough polymeric materials with high ductility and strength

Song, Pingan, Xu, Zhiguang, Dargusch, Matthew S, Chen, Zhi-Gang, Wang, Hao and Guo, Qipeng (2017). Granular nanostructure: a facile biomimetic strategy for the design of supertough polymeric materials with high ductility and strength. Advanced Materials, 29 (46) 1704661, 1-7. doi: 10.1002/adma.201704661

Metal injection moulding of non-spherical titanium powders: Processing, microstructure and mechanical properties

Dehghan-Manshadi, A., St John, D., Dargusch, M., Chen, Y., Sun, J. F. and Qian, M. (2017). Metal injection moulding of non-spherical titanium powders: Processing, microstructure and mechanical properties. Journal of Manufacturing Processes, 31, 416-423. doi: 10.1016/j.jmapro.2017.12.004

Effect of tool wear evolution on chip formation during dry machining of Ti-6Al-4V alloy

Dargusch, Matthew S., Sun, Shoujin, Kim, Ji Won, Li, Tong, Trimby, Patrick and Cairney, Julie (2017). Effect of tool wear evolution on chip formation during dry machining of Ti-6Al-4V alloy. International Journal of Machine Tools and Manufacture, 126, 13-17. doi: 10.1016/j.ijmachtools.2017.12.003

A case-study on the mechanism of flank wear during laser-assisted machining of a titanium alloy

Rahman Rashid, R. A., Palanisamy, Suresh, Sun, Shoujin and Dargusch, M. S. (2017). A case-study on the mechanism of flank wear during laser-assisted machining of a titanium alloy. International Journal of Machining and Machinability of Materials, 19 (6), 538-553. doi: 10.1504/IJMMM.2017.088895

Preparation of 2.5D woven fabric C-f/Al composite and its tensile deformation behavior in warp/weft direction

Zhenjun, Wang, Jingtao, Dong, Wang, Gui, Huan, Yu, Zhifeng, Xu and Dargusch, Matthew S. (2017). Preparation of 2.5D woven fabric C-f/Al composite and its tensile deformation behavior in warp/weft direction. Rare Metal Materials and Engineering, 46 (12), 3744-3752.

Oxide Dissolution and Oxygen Diffusion in Solid-State Recycled Ti-6Al-4V: Numerical Modeling, Verification by Nanoindentation, and Effects on Grain Growth and Recrystallization

Lui, E. W., Palanisamy, S., Dargusch, M. S. and Xia, K. (2017). Oxide Dissolution and Oxygen Diffusion in Solid-State Recycled Ti-6Al-4V: Numerical Modeling, Verification by Nanoindentation, and Effects on Grain Growth and Recrystallization. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 48A (12), 5978-5989. doi: 10.1007/s11661-017-4358-5

The influence of two common sterilization techniques on the corrosion of Mg and its alloys for biomedical applications

Johnston, Sean, Shi, Zhiming, Hoe, Cherilyn, Uggowitzer, Peter J., Cihova, Martina, Loffler, Jorg F., Dargusch, Matthew S. and Atrens, Andrejs (2017). The influence of two common sterilization techniques on the corrosion of Mg and its alloys for biomedical applications. Journal of Biomedical Materials Research - Part B Applied Biomaterials, 106 (5), 1907-1917. doi: 10.1002/jbm.b.34004

Effect of tool wear on chip formation during dry machining of Ti-6Al-4V alloy, part 1: Effect of gradual tool wear evolution

Sun, Shoujin, Brandt, Milan and Dargusch, Matthew S. (2017). Effect of tool wear on chip formation during dry machining of Ti-6Al-4V alloy, part 1: Effect of gradual tool wear evolution. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 231 (9), 1559-1574. doi: 10.1177/0954405415599956

Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processes

Attar, Hooyar, Dargusch, Matthew S., Ehtemam-Haghighi, Shima, Kent, Damon and Wu, Xinhua (2017). Comparative study of commercially pure titanium produced by laser engineered net shaping, selective laser melting and casting processes. Materials Science and Engineering: A, 705, 385-393. doi: 10.1016/j.msea.2017.08.103

Metal injection moulding of titanium and titanium alloys: challenges and recent development

Dehghan-Manshadi, A., Bermingham, M. J., Dargusch, M. S., StJohn, D. H. and Qian, M. (2017). Metal injection moulding of titanium and titanium alloys: challenges and recent development. Powder Technology, 319, 289-301. doi: 10.1016/j.powtec.2017.06.053

Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium

Wang, G., Wang, Q., Easton, M. A., Dargusch, M. S., Qian, M., Eskin, D. G. and StJohn, D. H. (2017). Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium. Scientific Reports, 7 (1) 9729, 9729. doi: 10.1038/s41598-017-10354-6

Metallurgical and geometrical characterisation of the 316L stainless steel clad deposited on a mild steel substrate

Rashid, R. A. Rahman, Abaspour, S., Palanisamy, S., Matthews, N. and Dargusch, M. S. (2017). Metallurgical and geometrical characterisation of the 316L stainless steel clad deposited on a mild steel substrate. Surface & Coatings Technology, 327, 174-184. doi: 10.1016/j.surfcoat.2017.08.013

A progressive analysis of matrix cracking-induced delamination in composite laminates using an advanced phantom node method

Reiner, Johannes, Veidt, Martin, Dargusch, Matthew and Gross, Lutz (2017). A progressive analysis of matrix cracking-induced delamination in composite laminates using an advanced phantom node method. Journal of Composite Materials, 51 (20), 2933-2947. doi: 10.1177/0021998316684203

Identifying the stages during ultrasonic processing that reduce the grain size of aluminum with added Al3Ti1B master alloy

Wang, Gui, Dargusch, Matthew S., Eskin, Dmitry G. and StJohn, David H. (2017). Identifying the stages during ultrasonic processing that reduce the grain size of aluminum with added Al3Ti1B master alloy. Advanced Engineering Materials, 19 (8) 1700264, 1700264. doi: 10.1002/adem.201700264

Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering

Chen, Yunhui, Frith, Jessica Ellen, Dehghan-Manshadi, Ali, Attar, Hooyar, Kent, Damon, Soro, Nicolas Dominique Mathieu, Bermingham, Michael J. and Dargusch, Matthew S. (2017). Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering. Journal of the Mechanical Behavior of Biomedical Materials, 75, 169-174. doi: 10.1016/j.jmbbm.2017.07.015

Deformation behaviour and mechanisms during hot compression at supertransus temperatures in Ti-10V-2Fe-3Al

Zhao, Juan, Zhong, Jie, Yan, Fei, Chai, Fang and Dargusch, Matthew (2017). Deformation behaviour and mechanisms during hot compression at supertransus temperatures in Ti-10V-2Fe-3Al. Journal of Alloys and Compounds, 710, 616-627. doi: 10.1016/j.jallcom.2017.03.219

Manufacturing of graded titanium scaffolds using a novel space holder technique

Chen, Yunhui , Kent, Damon , Bermingham, Michael , Dehghan-Manshadi, Ali , Wang, Gui , Wen, Cuie and Dargusch, Matthew (2017). Manufacturing of graded titanium scaffolds using a novel space holder technique. Bioactive Materials, 2 (4), 248-252. doi: 10.1016/j.bioactmat.2017.07.001

Effect of tool wear on chip formation during dry machining of Ti-6Al-4V alloy, part 2: effect of tool failure modes

Sun, Shoujin, Brandt, Milan and Dargusch, Matthew S. (2017). Effect of tool wear on chip formation during dry machining of Ti-6Al-4V alloy, part 2: effect of tool failure modes. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 231 (9), 1575-1586. doi: 10.1177/0954405415600011

Modeling of the dynamic recrystallization behavior of Csf/AZ91D magnesium matrix composites during hot compression process

Wang, Zhenjun, Huang, Biao, Qi, Lehua, Wang, Gui and Dargusch, Matthew S. (2017). Modeling of the dynamic recrystallization behavior of Csf/AZ91D magnesium matrix composites during hot compression process. Journal of Alloys and Compounds, 708, 328-336. doi: 10.1016/j.jallcom.2017.03.010

Simulation of convective flow and thermal conditions during ultrasonic treatment of an Al-2Cu alloy

Wang, Gui, Croaker, Paul, Dargusch, Matthew, McGuckin, Damian and StJohn, David (2017). Simulation of convective flow and thermal conditions during ultrasonic treatment of an Al-2Cu alloy. Computational Materials Science, 134, 116-125. doi: 10.1016/j.commatsci.2017.03.041

Manufacturing of biocompatible porous titanium scaffolds using a novel spherical sugar pellet space holder

Chen, Yunhui, Kent, Damon, Bermingham, Michael, Dehghan-Manshadi, Ali and Dargusch, Matthew (2017). Manufacturing of biocompatible porous titanium scaffolds using a novel spherical sugar pellet space holder. Materials Letters, 195, 92-95. doi: 10.1016/j.matlet.2017.02.092

The corrosion behaviours of plasma-sprayed Fe-based amorphous coatings

Jiang, Chaoping, Liu, Wangqiang, Wang, Gui, Chen, Yongnan, Xing, Yazhe, Zhang, Chunhua and Dargusch, Matthew (2017). The corrosion behaviours of plasma-sprayed Fe-based amorphous coatings. Surface Engineering, 34 (8), 1-6. doi: 10.1080/02670844.2017.1319647

Improvement of interfacial bonding between plasma-sprayed cast iron splat and aluminum substrate through preheating substrate

Xing, Ya-Zhe, Liu, Zhang, Wang, Gui, Li, Xing-Hang, Jiang, Chao-Ping, Chen, Yong-Nan, Zhang, Yong, Song, Xu-Ding and Dargusch, Matthew (2017). Improvement of interfacial bonding between plasma-sprayed cast iron splat and aluminum substrate through preheating substrate. Surface and Coatings Technology, 316, 190-198. doi: 10.1016/j.surfcoat.2017.03.032

Effects of spray parameters on the adhesion between plasma-sprayed cast iron splat and aluminium substrate

Xing, Ya-Zhe, Liu, Zhang, Wang, Gui, Li, Xing-Hang, Xing, Ya-Long, Jiang, Chao-Ping, Chen, Yong-Nan, Song, Xu-Ding and Dargusch, Matthew (2017). Effects of spray parameters on the adhesion between plasma-sprayed cast iron splat and aluminium substrate. Surface and Coatings Technology, 315, 1-8. doi: 10.1016/j.surfcoat.2017.02.019

Gasification of diosgenin solid waste for hydrogen production in supercritical water

Cao, Wen, Cao, Changqing, Guo, Liejin, Jin, Hui, Dargusch, Matthew, Bernhardt, Debra and Yao, Xiangdong (2017). Gasification of diosgenin solid waste for hydrogen production in supercritical water. International Journal of Hydrogen Energy, 42 (15), 9448-9457. doi: 10.1016/j.ijhydene.2017.03.115

Improvements in microstructure and wear resistance of plasma-sprayed Fe-based amorphous coating by laser-remelting

Jiang, Chaoping, Chen, Hong, Wang, Gui, Chen, Yongnan, Xing, Yazhe, Zhang, Chunhua and Dargusch, Matthew (2017). Improvements in microstructure and wear resistance of plasma-sprayed Fe-based amorphous coating by laser-remelting. Journal of Thermal Spray Technology, 26 (4), 778-786. doi: 10.1007/s11666-017-0546-5

Development in plasma surface diffusion techniques of Ti-6Al-4V alloy: a review

Xing, Ya-Zhe, Wang, Gui, Zhang, Yong, Chen, Yong-Nan and Dargusch, Matthew (2017). Development in plasma surface diffusion techniques of Ti-6Al-4V alloy: a review. International Journal of Advanced Manufacturing Technology, 92 (5-8), 1-12. doi: 10.1007/s00170-017-0302-5

Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting

Attar, H., Ehtemam-Haghighi, S., Kent, D., Okulov, I. V., Wendrock, H., Bӧnisch, M., Volegov, A. S., Calin, M., Eckert, J. and Dargusch, M. S. (2017). Nanoindentation and wear properties of Ti and Ti-TiB composite materials produced by selective laser melting. Materials Science and Engineering: A, 688, 20-26. doi: 10.1016/j.msea.2017.01.096

Grain refinement of wire arc additively manufactured titanium by the addition of silicon

Mereddy, S., Bermingham, M. J., StJohn, D. H. and Dargusch, M. S. (2017). Grain refinement of wire arc additively manufactured titanium by the addition of silicon. Journal of Alloys and Compounds, 695, 2097-2103. doi: 10.1016/j.jallcom.2016.11.049

Switched photocurrent on tin sulfide-based nanoplate photoelectrodes

Chen, Hongjun, Lyu, Miaoqiang, Zhang, Meng, Feron, Krishna, Searles, Debra J., Dargusch, Matthew, Yao, Xiangdong and Wang, Lianzhou (2017). Switched photocurrent on tin sulfide-based nanoplate photoelectrodes. ChemSusChem, 10 (4), 670-674. doi: 10.1002/cssc.201601603

N-type Bi-doped PbTe nanocubes with enhanced thermoelectric performance

Yang, Lei, Chen, Zhi-Gang, Hong, Min, Wang, Lihua, Kong, Deli, Huang, Liqing, Han, Guang, Zou, Yichao, Dargusch, Matthew and Zou, Jin (2017). N-type Bi-doped PbTe nanocubes with enhanced thermoelectric performance. Nano Energy, 31, 105-112. doi: 10.1016/j.nanoen.2016.11.027

Hydrogen production from supercritical water gasification of chicken manure

Cao, Wen, Cao, Changqing, Guo, Liejin, Jin, Hui, Dargusch, Matthew, Bernhardt, Debra and Yao, Xiangdong (2016). Hydrogen production from supercritical water gasification of chicken manure. International Journal of Hydrogen Energy, 41 (48), 22722-22731. doi: 10.1016/j.ijhydene.2016.09.031

Effects of chip conditions on the solid state recycling of Ti-6Al-4V machining chips

Lui, E. W., Palanisamy, S., Dargusch, M. S. and Xia, K. (2016). Effects of chip conditions on the solid state recycling of Ti-6Al-4V machining chips. Journal of Materials Processing Technology, 238, 297-304. doi: 10.1016/j.jmatprotec.2016.07.028

The effect of droplet size on the localized corrosion of high-strength aluminum alloys

Knight, S. P., Sudholz, A. D., Butler, A., Palanisamy, S., Dargusch, M. S. and Trueman, A. R. (2016). The effect of droplet size on the localized corrosion of high-strength aluminum alloys. Materials and Corrosion, 67 (12), 1294-1307. doi: 10.1002/maco.201609045

Constitutive equation for the hot deformation behavior of Csf/AZ91D composites and its validity for numerical simulation

Wang, Zhenjun, Qi, Lehua, Wang, Gui, Li, Hejun and Dargusch, Matthew S. (2016). Constitutive equation for the hot deformation behavior of Csf/AZ91D composites and its validity for numerical simulation. Mechanics of Materials, 102, 90-96. doi: 10.1016/j.mechmat.2016.08.011

Functionally graded porous scaffolds made of Ti-based agglomerates

Nazari, Keivan A., Hilditch, Tim, Dargusch, Matthew S. and Nouri, Alireza (2016). Functionally graded porous scaffolds made of Ti-based agglomerates. Journal of the Mechanical Behavior of Biomedical Materials, 63, 157-163. doi: 10.1016/j.jmbbm.2016.06.016

Atomic size and local order effects on the high temperature strength of binary Mg alloys

Abaspour, Saeideh, Zambelli, Victor, Dargusch, Matthew and Caceres, Carlos H. (2016). Atomic size and local order effects on the high temperature strength of binary Mg alloys. Materials Science and Engineering: A, 673, 114-121. doi: 10.1016/j.msea.2016.07.019

Influence of surface condition on the corrosion of ultra-high-purity Mg alloy wire

Johnston, Sean, Shi, Zhiming, Dargusch, Matthew S. and Atrens, Andrej (2016). Influence of surface condition on the corrosion of ultra-high-purity Mg alloy wire. Corrosion Science, 108, 66-75. doi: 10.1016/j.corsci.2016.03.007

The role of ω in the precipitation of α in near-β Ti alloys

Li, Tong, Kent, Damon, Sha, Gang, Cairney, Julie M. and Dargusch, Matthew S. (2016). The role of ω in the precipitation of α in near-β Ti alloys. Scripta Materialia, 117, 92-95. doi: 10.1016/j.scriptamat.2016.02.026

Application of augmented finite element and cohesive zone modelling to predict damage evolution in metal matrix composites and aircraft coatings

Han, Bing, Veidt, Martin, Reiner, Johannes and Dargusch, Matthew S. (2016). Application of augmented finite element and cohesive zone modelling to predict damage evolution in metal matrix composites and aircraft coatings. Journal of Mechanical Engineering Research, 8 (1), 1-17. doi: 10.5897/JMER2015.0377

New insights into the phase transformations to isothermal ω and ω-assisted α in near β-Ti alloys

Li, Tong, Kent, Damon, Sha, Gang, Stephenson, Leigh T., Ceguerra, Anna V., Ringer, Simon P., Dargusch, Matthew S. and Cairney, Julie M. (2016). New insights into the phase transformations to isothermal ω and ω-assisted α in near β-Ti alloys. Acta Materialia, 106, 353-366. doi: 10.1016/j.actamat.2015.12.046

The dynamic response of a metastable β Ti-Nb alloy to high strain rates at room and elevated temperatures

Zhan, Hongyi, Wang, Gui, Kent, Damon and Dargusch, Matthew (2016). The dynamic response of a metastable β Ti-Nb alloy to high strain rates at room and elevated temperatures. Acta Materialia, 105, 104-113. doi: 10.1016/j.actamat.2015.11.056

Green synthesis of porous three-dimensional nitrogen-doped graphene foam for electrochemical applications

Yu, Hua, Ye, Delai, Butburee, Teera, Wang, Lianzhou and Dargusch, Matthew (2016). Green synthesis of porous three-dimensional nitrogen-doped graphene foam for electrochemical applications. ACS Applied Materials and Interfaces, 8 (4), 2505-2510. doi: 10.1021/acsami.5b09030

Low-temperature templated synthesis of porous TiO2 single-crystals for solar cell applications

Yu, Hua, Wang, Lianzhou and Dargusch, Matthew (2016). Low-temperature templated synthesis of porous TiO2 single-crystals for solar cell applications. Solar Energy, 123, 17-22. doi: 10.1016/j.solener.2015.10.044

Stress corrosion cracking of high-strength AZ31 processed by high-ratio differential speed rolling

Shi, Zhiming, Kim, W. J., Cao, Fuyong, Dargusch, Matthew S. and Atrens, Andrej (2015). Stress corrosion cracking of high-strength AZ31 processed by high-ratio differential speed rolling. Journal of Magnesium and Alloys, 3 (4), 271-282. doi: 10.1016/j.jma.2015.11.006

An investigation of the mechanical behaviour of fine tubes fabricated from a Ti-25Nb-3Mo-3Zr-2Sn alloy

Zhang, Yaowu, Kent, Damon, Wang, Gui, St John, David and Dargusch, Matthew (2015). An investigation of the mechanical behaviour of fine tubes fabricated from a Ti-25Nb-3Mo-3Zr-2Sn alloy. Materials and Design, 85, 256-265. doi: 10.1016/j.matdes.2015.06.127

The Dependence of Isothermal ω Precipitation on the Quenching Rate in a Metastable β-Ti Alloy

Chen, Jing, Xiao, Wenlong, Dargusch, Matthew Simon and Ma, Chaoli (2015). The Dependence of Isothermal ω Precipitation on the Quenching Rate in a Metastable β-Ti Alloy. Scientific Reports, 5 (Art No.: 14632) 14632, 14632. doi: 10.1038/srep14632

On the deformation mechanisms and strain rate sensitivity of a metastable β Ti-Nb alloy

Zhan, Hongyi, Zeng, Weidong, Wang, Gui, Kent, Damon and Dargusch, Matthew (2015). On the deformation mechanisms and strain rate sensitivity of a metastable β Ti-Nb alloy. Scripta Materialia, 107, 34-37. doi: 10.1016/j.scriptamat.2015.05.014

Stress corrosion cracking of several hot-rolled binary Mg-X alloys

Cao, Fuyong, Shi, Zhiming, Song, Guang-Ling, Liu, Ming, Dargusch, Matthew S. and Atrens, Andrej (2015). Stress corrosion cracking of several hot-rolled binary Mg-X alloys. Corrosion Science, 98, 6-19. doi: 10.1016/j.corsci.2015.04.023

Tool wear mechanisms involved in crater formation on uncoated carbide tool when machining Ti6Al4V alloy

Rahman Rashid, R. A., Palanisamy, S., Sun, S. and Dargusch, M. S. (2015). Tool wear mechanisms involved in crater formation on uncoated carbide tool when machining Ti6Al4V alloy. International Journal of Advanced Manufacturing Technology, 83 (9-12), 1-9. doi: 10.1007/s00170-015-7668-z

Cutting force, chip formation, and tool wear during the laser-assisted machining a near-alpha titanium alloy BTi-6431S

Gao, Yanfeng, Wang, Gui, Bermingham, Michael J. and Dargusch, Matthew S. (2015). Cutting force, chip formation, and tool wear during the laser-assisted machining a near-alpha titanium alloy BTi-6431S. International Journal of Advanced Manufacturing Technology, 79 (9-12), 1949-1960. doi: 10.1007/s00170-015-6917-5

Evaluation of magnesium die-casting alloys for elevated temperature applications: microstructure, tensile properties, and creep resistance

Zhu, Suming, Easton, Mark A., Abbott, Trevor B., Nie, Jian-Feng, Dargusch, Matthew S., Hort, Norbert and Gibson, Mark A. (2015). Evaluation of magnesium die-casting alloys for elevated temperature applications: microstructure, tensile properties, and creep resistance. Metallurgical and Materials Transactions A, 46 (8), 3543-3554. doi: 10.1007/s11661-015-2946-9

Effect of cryogenic compressed air on the evolution of cutting force and tool wear during machining of Ti-6Al-4V alloy

Sun, Shoujin, Brandt, Milan, Palanisamy, Suresh and Dargusch, Matthew S (2015). Effect of cryogenic compressed air on the evolution of cutting force and tool wear during machining of Ti-6Al-4V alloy. Journal of Materials Processing Technology, 221 (9), 243-254. doi: 10.1016/j.jmatprotec.2015.02.017

HAADF-STEM study of phase separation and the subsequent α phase precipitation in a β-Ti alloy

Zhu, Y. M., Zhu, S. M., Dargusch, M. S. and Nie, J. F. (2015). HAADF-STEM study of phase separation and the subsequent α phase precipitation in a β-Ti alloy. Scripta Materialia, 112, 46-49. doi: 10.1016/j.scriptamat.2015.09.007

Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions

Bermingham, M. J., Kent, D., Zhan, H., StJohn, D. H. and Dargusch, M. S. (2015). Controlling the microstructure and properties of wire arc additive manufactured Ti–6Al–4V with trace boron additions. Acta Materialia, 91, 289-303. doi: 10.1016/j.actamat.2015.03.035

Influence of casting porosity on the corrosion behaviour of Mg0.1Si

Cao, Fuyong, Shi, Zhiming, Song, Guang-Ling, Liu, Ming, Dargusch, Matthew S. and Atrens, Andrej (2015). Influence of casting porosity on the corrosion behaviour of Mg0.1Si. Corrosion Science, 94, 255-269. doi: 10.1016/j.corsci.2015.02.002

A new understanding of the wear processes during laser assisted milling 17-4 precipitation hardened stainless steel

Bermingham, M. J., Kent, D. and Dargusch, M. S. (2015). A new understanding of the wear processes during laser assisted milling 17-4 precipitation hardened stainless steel. Wear, 328-329, 518-530. doi: 10.1016/j.wear.2015.03.025

Corrosion and stress corrosion cracking of ultra-high-purity Mg5Zn

Shi, Zhiming, Hofstetter, Joelle, Cao, Fuyong, Uggowitzer, Peter J., Dargusch, Matthew S. and Atrens, Andrej (2015). Corrosion and stress corrosion cracking of ultra-high-purity Mg5Zn. Corrosion Science, 93, 330-335. doi: 10.1016/j.corsci.2015.01.032

Microstructural characteristics of adiabatic shear localization in a metastable beta titanium alloy deformed at high strain rate and elevated temperatures

Zhan, Hongyi, Zeng, Weidong, Wang, Gui, Kent, Damon and Dargusch, Matthew (2015). Microstructural characteristics of adiabatic shear localization in a metastable beta titanium alloy deformed at high strain rate and elevated temperatures. Materials Characterization, 102 7820, 103-113. doi: 10.1016/j.matchar.2015.02.017

Review of recent developments in the field of magnesium corrosion

Atrens, Andrej, Song, Guang-Ling, Liu, Ming, Shi, Zhiming, Cao, Fuyong and Dargusch, Matthew S. (2015). Review of recent developments in the field of magnesium corrosion. Advanced Engineering Materials, 17 (4), 400-453. doi: 10.1002/adem.201400434

The mechanism of ω-assisted α phase formation in near β-Ti alloys

Li, Tong, Kent, Damon, Sha, Gang, Dargusch, Matthew S. and Cairney, Julie M. (2015). The mechanism of ω-assisted α phase formation in near β-Ti alloys. Scripta Materialia, 104, 75-78. doi: 10.1016/j.scriptamat.2015.04.007

Evolution of the microstructure and mechanical properties during fabrication of mini-tubes from a biomedical beta-titanium alloy

Zhang, Yaowu, Kent, Damon, Wang, Gui, St John, David and Dargusch, Matthew (2015). Evolution of the microstructure and mechanical properties during fabrication of mini-tubes from a biomedical beta-titanium alloy. Journal of the Mechanical Behavior of Biomedical Materials, 42, 207-218. doi: 10.1016/j.jmbbm.2014.11.013

Tool life and wear mechanisms in laser assisted milling Ti-6Al-4V

Bermingham, M. J., Sim, W. M., Kent, D., Gardiner, S. and Dargusch, M. S. (2015). Tool life and wear mechanisms in laser assisted milling Ti-6Al-4V. Wear, 322-323, 151-163. doi: 10.1016/j.wear.2014.11.001

Evaluation of Magnesium Die-Casting Alloys for Elevated Temperature Applications: Castability

Easton, Mark A., Zhu, Suming, Abbott, Trevor B., Dargusch, Matthew, Murray, Morris, Savage, Gary, Hort, Norbert and Gibson, Mark A. (2015). Evaluation of Magnesium Die-Casting Alloys for Elevated Temperature Applications: Castability. Advanced Engineering Materials, 18 (6), 953-962. doi: 10.1002/adem.201500407

In Situ Synchrotron Radiation Study of TiH2-6Al-4V and Ti-6Al-4V: Accelerated Alloying and Phase Transformation, and Formation of an Oxygen-Enriched Ti4Fe2O Phase in TiH2-6Al-4V

Yan, Ming, Dargusch, M. S., Kong, C., Kimpton, J. A., Kohara, S., Brandt, M. and Qian, M. (2015). In Situ Synchrotron Radiation Study of TiH2-6Al-4V and Ti-6Al-4V: Accelerated Alloying and Phase Transformation, and Formation of an Oxygen-Enriched Ti4Fe2O Phase in TiH2-6Al-4V. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 46 (1), 41-45. doi: 10.1007/s11661-014-2631-4

Response of aluminium honeycomb sandwich panels subjected to foam projectile impact - an experimental study

Yahaya, M. A., Ruan, D., Lu, G. and Dargusch, M. S. (2015). Response of aluminium honeycomb sandwich panels subjected to foam projectile impact - an experimental study. International Journal of Impact Engineering, 75, 100-109. doi: 10.1016/j.ijimpeng.2014.07.019

Stress corrosion cracking of several solution heat-treated Mg-X alloys

Cao, Fuyong, Shi, Zhiming, Song, Guang-Ling, Liu, Ming, Dargusch, Matthew S. and Atrens, Andrej (2015). Stress corrosion cracking of several solution heat-treated Mg-X alloys. Corrosion Science, 96, 121-132. doi: 10.1016/j.corsci.2015.04.010

The role of ultrasonic treatment in refining the as-cast grain structure during the solidification of an Al–2Cu alloy

Wang, Gui, Dargusch, M. S., Qian, M., Eskin, D. G. and St John, David H. (2014). The role of ultrasonic treatment in refining the as-cast grain structure during the solidification of an Al–2Cu alloy. Journal of Crystal Growth, 408 (1), 119-124. doi: 10.1016/j.jcrysgro.2014.09.018

Laser-assisted milling strategies with different cutting tool paths

Bermingham, M.J., Schaffarzyk, P., Palanisamy, S. and Dargusch, M. S. (2014). Laser-assisted milling strategies with different cutting tool paths. The International Journal of Advanced Manufacturing Technology, 74 (9-12), 1487-1494. doi: 10.1007/s00170-014-6093-z

Microstructural design for thermal creep and radiation damage resistance of titanium aluminide alloys for high-temperature nuclear structural applications

Zhu, Hanliang, Wei, Tao, Carr, David, Harrison, Robert, Edwards, Lyndon, Seo, Dongyi, Maruyama, Kouichi and Dargusch, Matthew S. (2014). Microstructural design for thermal creep and radiation damage resistance of titanium aluminide alloys for high-temperature nuclear structural applications. Current Opinion in Solid State & Materials Science, 18 (5), 269-278. doi: 10.1016/j.cossms.2014.07.003

Selective production of hydrogen peroxide and oxidation of hydrogen sulfide in an unbiased solar photoelectrochemical cell

Zong, Xu, Chen, Hongjun, Seger, Brian, Pedersen, Thomas, Dargusch, Matthew S., McFarland, Eric W., Li, Can and Wang, Lianzhou (2014). Selective production of hydrogen peroxide and oxidation of hydrogen sulfide in an unbiased solar photoelectrochemical cell. Energy and Environmental Science, 7 (10), 3347-3351. doi: 10.1039/c4ee01503g

Significant α-phase growth confinement in Grade 4 titanium and substantial β-phase refinement in Grade 7 titanium

Yan, M., Qian, M., Song, T. T., Yan, M., Dargusch, M. S. and Wei, X. S. (2014). Significant α-phase growth confinement in Grade 4 titanium and substantial β-phase refinement in Grade 7 titanium. MRS Communications, 4 (4), 183-188. doi: 10.1557/mrc.2014.33

Influence of hot rolling on the corrosion behavior of several Mg-X alloys

Cao, Fuyong, Shi, Zhiming, Song, Guang-Ling, Liu, Ming, Dargusch, Matthew S. and Atrens, Andrej (2014). Influence of hot rolling on the corrosion behavior of several Mg-X alloys. Corrosion Science, 90, 176-191. doi: 10.1016/j.corsci.2014.10.012

Review of effect of oxygen on room temperature ductility of titanium and titanium alloys

Yan, M., Xu, W., Dargusch, M. S., Tang, H. P., Brandt, M. and Qian, M. (2014). Review of effect of oxygen on room temperature ductility of titanium and titanium alloys. Powder Metallurgy, 57 (4), 251-257. doi: 10.1179/1743290114Y.0000000108

Constitutive modelling of the flow behaviour of a β titanium alloy at high strain rates and elevated temperatures using the Johnson-Cook and modified Zerilli-Armstrong models

Zhan, Hongyi, Wang, Gui, Kent, Damon and Dargusch, Matthew (2014). Constitutive modelling of the flow behaviour of a β titanium alloy at high strain rates and elevated temperatures using the Johnson-Cook and modified Zerilli-Armstrong models. Materials Science and Engineering A, 612, 71-79. doi: 10.1016/j.msea.2014.06.030

Achieving superior strength and ductility in Ti-6Al-4V recycled from machining chips by equal channel angular pressing

McDonald, D. T., Lui, E. W., Palanisamy, S., Dargusch, M. S. and Xia, K. (2014). Achieving superior strength and ductility in Ti-6Al-4V recycled from machining chips by equal channel angular pressing. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45 (9), 4089-4102. doi: 10.1007/s11661-014-2323-0

The dynamic response of a β titanium alloy to high strain rates and elevated temperatures

Zhan, Hongyi, Kent, Damon, Wang, Gui and Dargusch, Matthew S. (2014). The dynamic response of a β titanium alloy to high strain rates and elevated temperatures. Materials Science and Engineering A, 607, 417-426. doi: 10.1016/j.msea.2014.04.028

Precipitation of the α-phase in an ultrafine grained beta-titanium alloy processed by severe plastic deformation

Li, Tong, Kent, Damon, Sha, Gang, Dargusch, Matthew S. and Cairney, Julia M. (2014). Precipitation of the α-phase in an ultrafine grained beta-titanium alloy processed by severe plastic deformation. Materials Science and Engineering A, 605, 144-150. doi: 10.1016/j.msea.2014.03.044

A transmission electron microscopy and three-dimensional atom probe study of the oxygen-induced fine microstructural features in as-sintered Ti-6Al-4V and their impacts on ductility

Yan, M., Dargusch, M. S., Ebel, T. and Qian, M. (2014). A transmission electron microscopy and three-dimensional atom probe study of the oxygen-induced fine microstructural features in as-sintered Ti-6Al-4V and their impacts on ductility. Acta Materialia, 68 (15), 196-206. doi: 10.1016/j.actamat.2014.01.015

SPH/FE modeling of cutting force and chip formation during thermally assisted machining of Ti6Al4V alloy

Xi, Yao, Bermingham, Michael, Wang, Gui and Dargusch, Matthew (2014). SPH/FE modeling of cutting force and chip formation during thermally assisted machining of Ti6Al4V alloy. Computational Materials Science, 84, 188-197. doi: 10.1016/j.commatsci.2013.12.018

Advantages of milling and drilling Ti-6Al-4V components with high-pressure coolant

Bermingham, M. J., Palanisamy, S., Morr, D., Andrews, R. and Dargusch, M. S. (2014). Advantages of milling and drilling Ti-6Al-4V components with high-pressure coolant. International Journal of Advanced Manufacturing Technology, 72 (1-4), 77-88. doi: 10.1007/s00170-014-5666-1

Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and reassessment of the maximum carbon limit

Yan, M., Qian, M., Kong, C. and Dargusch, M. S. (2014). Impacts of trace carbon on the microstructure of as-sintered biomedical Ti-15Mo alloy and reassessment of the maximum carbon limit. Acta Biomaterialia, 10 (2), 1014-1023. doi: 10.1016/j.actbio.2013.10.034

A study on laser assisted machining of Ti10V2Fe3Al alloy with varying laser power

Rahman Rashid, R. A., Sun, S., Palanisamy, S., Wang, G. and Dargusch, M. S. (2014). A study on laser assisted machining of Ti10V2Fe3Al alloy with varying laser power. International Journal of Advanced Manufacturing Technology, 74 (1-4), 219-224. doi: 10.1007/s00170-014-5958-5

Mechanics and dynamics of helical milling operations

Liu, Changyi, Wang, Gui and Dargusch, Matthew S. (2014). Mechanics and dynamics of helical milling operations. Strojniski Vestnik/Journal of Mechanical Engineering, 60 (11), 716-724. doi: 10.5545/sv-jme.2013.1588

Numerical modeling of laser assisted machining of a beta titanium alloy

Xi, Yao, Zhan, Hongyi, Rahman Rashid, R. A., Wang, Gui, Sun, Shoujin and Dargusch, Matthew (2014). Numerical modeling of laser assisted machining of a beta titanium alloy. Computational Materials Science, 92, 149-156. doi: 10.1016/j.commatsci.2014.05.023

The cold-rolling behaviour of AZ31 tubes for fabrication of biodegradable stents

Zhang, Yaowu, Kent, Damon, Wang, Gui, StJohn, David and Dargusch, Matthew S. (2014). The cold-rolling behaviour of AZ31 tubes for fabrication of biodegradable stents. Journal of the Mechanical Behavior of Biomedical Materials, 39, 292-303. doi: 10.1016/j.jmbbm.2014.07.026

Effects of phase stability and processing on the mechanical properties of Ti-Nb based β Ti alloys

Kent, Damon, Wang, Gui and Dargusch, Matthew (2013). Effects of phase stability and processing on the mechanical properties of Ti-Nb based β Ti alloys. Journal of the Mechanical Behavior of Biomedical Materials, 28, 15-25. doi: 10.1016/j.jmbbm.2013.07.007

Finite element modeling of cutting force and chip formation during thermally assisted machining of Ti6Al4V alloy

Xi, Yao, Bermingham, Michael, Wang, Gui and Dargusch, Matthew (2013). Finite element modeling of cutting force and chip formation during thermally assisted machining of Ti6Al4V alloy. Journal of Manufacturing Science and Engineering, 135 (6) 061014, 061014-1-061014-9. doi: 10.1115/1.4025740

Analysis of the creep behaviour of die-cast Mg-3Al-1Si alloy

Zhu, S. M., Easton, M. A., Gibson, M. A., Dargusch, M. S. and Nie, J. F. (2013). Analysis of the creep behaviour of die-cast Mg-3Al-1Si alloy. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 578, 377-382. doi: 10.1016/j.msea.2013.04.100

Experimental investigation of laser assisted machining of AZ91 magnesium alloy

Rashid, Rizwan Abdul Rahman, Sun, Shoujin, Wang, Gui and Dargusch, Matthew Simon (2013). Experimental investigation of laser assisted machining of AZ91 magnesium alloy. International Journal of Precision Engineering and Manufacturing, 14 (7), 1263-1265. doi: 10.1007/s12541-013-0172-1

The effect of cutting speed and heat treatment on the fatigue life of Grade 5 and Grade 23 Ti-6Al-4V alloys

Niu, W., Bermingham, M. J., Baburamani, P. S., Palanisamy, S., Dargusch, M. S., Turk, S., Grigson, B. and Sharp, P. K. (2013). The effect of cutting speed and heat treatment on the fatigue life of Grade 5 and Grade 23 Ti-6Al-4V alloys. Materials & Design, 46, 640-644. doi: 10.1016/j.matdes.2012.10.056

The response of the high strength Ti-10V-2Fe-3Al beta titanium alloy to laser assisted cutting

Rashid, R. A. Rahman, Bermingham, M. J., Sun, S., Wang, G. and Dargusch, M. S. (2013). The response of the high strength Ti-10V-2Fe-3Al beta titanium alloy to laser assisted cutting. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology, 37 (2), 461-472. doi: 10.1016/j.precisioneng.2012.12.002

Ultrafine-grained pure Ti recycled by equal channel angular pressing with high strength and good ductility

Luo, P., McDonald, D. T., Palanisamy, S., Dargusch, M. S. and Xia, K. (2013). Ultrafine-grained pure Ti recycled by equal channel angular pressing with high strength and good ductility. Journal of Materials Processing Technology, 213 (3), 469-476. doi: 10.1016/j.jmatprotec.2012.10.016

An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy

Rashid, R. A. Rahman, Sun, S., Wang, G. and Dargusch, M. S. (2012). An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy. International Journal of Machine Tools and Manufacture, 63, 58-69. doi: 10.1016/j.ijmachtools.2012.06.004

Haemocompatibility of Ti-3Zr-2Sn-3Mo-25Nb biomedical alloy with surface heparinization using electrostatic self assembly technology

Yu, Sen, Yu, Zhen-tao, Han, Jian-ye, Wang, Gui, Niu, Jin-long and Dargusch, Matthew S. (2012). Haemocompatibility of Ti-3Zr-2Sn-3Mo-25Nb biomedical alloy with surface heparinization using electrostatic self assembly technology. Transactions of Nonferrous Metals Society of China, 22 (12), 3046-3052. doi: 10.1016/S1003-6326(11)61569-0

Modelling, simulation and experimental investigation of cutting forces during helical milling operations

Liu, Changyi, Wang, Gui and Dargusch, Matthew S. (2012). Modelling, simulation and experimental investigation of cutting forces during helical milling operations. International Journal of Advanced Manufacturing Technology, 63 (9-12), 839-850. doi: 10.1007/s00170-012-3951-4

The effect of laser power on the machinability of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy during laser assisted machining

Rashid, R. A. Rahman, Sun, S., Wang, G. and Dargusch, M. S. (2012). The effect of laser power on the machinability of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy during laser assisted machining. International Journal of Machine Tools & Manufacture, 63, 41-43. doi: 10.1016/j.ijmachtools.2012.07.006

Understanding the tool wear mechanism during thermally assisted machining Ti-6Al-4V

Bermingham, M. J., Palanisamy, S. and Dargusch, M. S. (2012). Understanding the tool wear mechanism during thermally assisted machining Ti-6Al-4V. International Journal of Machine Tools & Manufacture, 62, 76-87. doi: 10.1016/j.ijmachtools.2012.07.001

Thermal stability of an ultrafine grain β-Ti alloy

Kent, D., Xiao, W. L., Wang, G., Yu, Z. and Dargusch, M. S. (2012). Thermal stability of an ultrafine grain β-Ti alloy. Materials Science and Engineering A, 556, 582-587. doi: 10.1016/j.msea.2012.07.030

Determination of minimum machining depth after heat treatment of ASTM grade 2 titanium alloy

Dobeson, Richard G., McDonald, Stuart D. and Dargusch, Matthew S. (2012). Determination of minimum machining depth after heat treatment of ASTM grade 2 titanium alloy. Advanced Engineering Materials, 14 (7), 473-476. doi: 10.1002/adem.201200106

Determination of the influence of processing parameters on the mechanical properties of the Ti-6Al-4V alloy using an artificial neural network

Sun, Yu, Zeng, Weidong, Han, Yuanfei, Ma, Xiong, Zhao, Yongqing, Guo, Ping, Wang, Gui and Dargusch, Matthew S. (2012). Determination of the influence of processing parameters on the mechanical properties of the Ti-6Al-4V alloy using an artificial neural network. Computational Materials Science, 60, 239-244. doi: 10.1016/j.commatsci.2012.03.047

Local structure of NiAl compounds investigated by extended X-ray absorption fine-structure spectroscopy

Tian, J. S., Han, G. M., Wei, H., Jin, T. and Dargusch, M. S. (2012). Local structure of NiAl compounds investigated by extended X-ray absorption fine-structure spectroscopy. Journal of Synchrotron Radiation, 19 (4), 503-507. doi: 10.1107/S0909049512015646

Thermal analysis of precipitation reactions in a Ti-25Nb-3Mo-3Zr-2Sn alloy

Kent, Damon, Pas, Steven, Zhu, Suming, Wang, Gui and Dargusch, Matthew S. (2012). Thermal analysis of precipitation reactions in a Ti-25Nb-3Mo-3Zr-2Sn alloy. Applied Physics A: Materials Science and Processing, 107 (4), 835-841. doi: 10.1007/s00339-012-6778-9

A modified Hall-Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing

Luo, P., McDonald, D.T., Xu, W., Palanisamy, S., Dargusch, M.S. and Xia, K. (2012). A modified Hall-Petch relationship in ultrafine-grained titanium recycled from chips by equal channel angular pressing. Scripta Materialia, 66 (10), 785-788. doi: 10.1016/j.scriptamat.2012.02.008

A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti-6Al-4V cutting

Bermingham, M. J., Palanisamy, S., Kent, D. and Dargusch, M. S. (2012). A comparison of cryogenic and high pressure emulsion cooling technologies on tool life and chip morphology in Ti-6Al-4V cutting. Journal of Materials Processing Technology, 212 (4), 752-765. doi: 10.1016/j.jmatprotec.2011.10.027

Analysis of microstructure and strengthening in pure titanium recycled from machining chips by equal channel angular pressing using electron backscatter diffraction

Luo, P., McDonald, D. T., Zhu, S. M., Palanisamy, S., Dargusch, M. S. and Xia, K. (2012). Analysis of microstructure and strengthening in pure titanium recycled from machining chips by equal channel angular pressing using electron backscatter diffraction. Materials Science and Engineering: A, 538, 252-258. doi: 10.1016/j.msea.2012.01.039

Microstructural characterization of high pressure die cast Mg-Zn-Al-RE alloys

Xiao, Wenlong, Zhu, Suming, Easton, Mark A., Dargusch, Matthew S., Gibson, Mark A. and Nie, Jian-feng (2012). Microstructural characterization of high pressure die cast Mg-Zn-Al-RE alloys. Materials Characterization, 65, 28-36. doi: 10.1016/j.matchar.2012.01.001

The influence of Zn additions on the microstructure and creep resistance of high pressure die cast magnesium alloy AE44

Xiao, Wenlong, Easton, Mark A., Dargusch, Matthew S., Zhu, Matthew S. and Gibson, Mark A. (2012). The influence of Zn additions on the microstructure and creep resistance of high pressure die cast magnesium alloy AE44. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 539, 177-184. doi: 10.1016/j.msea.2012.01.077

Casting defects and mechanical properties of high pressure die cast Mg-Zn-Al-RE alloys

Xiao, Wenlong, Easton, Mark A., Zhu, Suming, Dargusch, Matthew S., Gibson, Mark A., Jia, Shusheng and Nie, Jianfeng (2012). Casting defects and mechanical properties of high pressure die cast Mg-Zn-Al-RE alloys. Advanced Engineering Materials, 14 (1-2), 68-76. doi: 10.1002/adem.201100149

Compressive deformation behavior of a near-beta titanium alloy

Song, Wei Qian, Sun, Shoujin, Zhu, Suming, Wang, Gui, Wang, James and Dargusch, Matthew S. (2012). Compressive deformation behavior of a near-beta titanium alloy. Materials and Design, 34, 739-745. doi: 10.1016/j.matdes.2011.06.049

Influence of ageing temperature and heating rate on the properties and microstructure of beta Ti alloy, Ti-6Cr-5Mo-5V-4Al

Kent, D., Wang, G., Wang, W. and Dargusch, M. S. (2012). Influence of ageing temperature and heating rate on the properties and microstructure of beta Ti alloy, Ti-6Cr-5Mo-5V-4Al. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 531, 98-106. doi: 10.1016/j.msea.2011.10.040

Machinability of a near beta titanium alloy

Rashid, R. A. Rahman, Sun, S., Wang, G. and Dargusch, M. S. (2011). Machinability of a near beta titanium alloy. Proceedings of the Institution of Mechanical Engineers Part B, 225 (12), 2151-2162. doi: 10.1177/2041297511406649

Modeling the correlation between microstructure and the properties of the Ti–6Al–4V alloy based on an artificial neural network

Sun, Yu, Zeng, Weidong, Han, Yuanfei, Zhao, Yongqing, Wang, Gui, Dargusch, Matthew S. and Guo, Ping (2011). Modeling the correlation between microstructure and the properties of the Ti–6Al–4V alloy based on an artificial neural network. Materials Science and Engineering A, 528 (29-30), 8757-8764. doi: 10.1016/j.msea.2011.08.059

Processing considerations for cast Ti–25Nb–3Mo–3Zr–2Sn biomedical alloys

Bermingham, M. J., McDonald, S. D., Buddery, A. J., StJohn, D. H. and Dargusch, M. S. (2011). Processing considerations for cast Ti–25Nb–3Mo–3Zr–2Sn biomedical alloys. Materials Science and Engineering C: Materials for Biological Applications, 31 (7), 1520-1525. doi: 10.1016/j.msec.2011.06.011

Experimental investigation of cutting forces and tool wear during laser-assisted milling of Ti-6Al-4V alloy

Sun, S., Brandt, M., Barnes, J. E. and Dargusch, M. S. (2011). Experimental investigation of cutting forces and tool wear during laser-assisted milling of Ti-6Al-4V alloy. Proceedings of the Institution of Mechanical Engineers Part B: Journal of Engineering Manufacture, 225 (9), 1512-1527. doi: 10.1177/0954405411411608

Influence of Co addition on constituent phases and performance of a NiCrAlYRe alloy system

Liang, J. J., Wei, H., Zhu, Y. L., Sun, X. F., Jin, T., Hu, Z. Q., Dargusch, M. S. and Yao, X. (2011). Influence of Co addition on constituent phases and performance of a NiCrAlYRe alloy system. Surface and Coatings Technology, 205 (21-22), 4968-4979. doi: 10.1016/j.surfcoat.2011.04.084

A predictive model for the thermal contact resistance at liquid-solid interfaces: analytical developments and validation

Hamasaiid, A., Dargusch, M. S., Loulou, T. and Dour, G. (2011). A predictive model for the thermal contact resistance at liquid-solid interfaces: analytical developments and validation. International Journal of Thermal Sciences, 50 (8), 1445-1459. doi: 10.1016/j.ijthermalsci.2011.02.016

Crystallisation kinetics of some archetypal ionic liquids: isothermal and non-isothermal determination of the Avrami exponent

Pas, Steven J., Dargusch, Matthew S. and MacFarlane, Douglas R. (2011). Crystallisation kinetics of some archetypal ionic liquids: isothermal and non-isothermal determination of the Avrami exponent. Physical Chemistry Chemical Physics, 13 (25), 12033-12040. doi: 10.1039/c1cp00040c

Biocompatibility and osteoconduction of active porous calcium–phosphate films on a novel Ti–3Zr–2Sn–3Mo–25Nb biomedical alloy

Yu, Sen, Yu, Zhentao, Wang, Gui, Han, Jianye, Ma, Xiqun and Dargusch, Matthew S. (2011). Biocompatibility and osteoconduction of active porous calcium–phosphate films on a novel Ti–3Zr–2Sn–3Mo–25Nb biomedical alloy. Colloids and Surfaces B: Biointerfaces, 85 (2), 103-115. doi: 10.1016/j.colsurfb.2011.02.025

New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V

Bermingham, M. J., Kirsch, J., Sun, S., Palanisamy, S. and Dargusch, M. S. (2011). New observations on tool life, cutting forces and chip morphology in cryogenic machining Ti-6Al-4V. International Journal of Machine Tools and Manufacture, 51 (6), 500-511. doi: 10.1016/j.ijmachtools.2011.02.009

The effect of boron on the refinement of microstructure in cast cobalt alloys

Bermingham, Michael J., McDonald, Stuart D., StJohn, David H. and Dargusch, Matthew S. (2011). The effect of boron on the refinement of microstructure in cast cobalt alloys. Journal of Materials Research, 26 (7), 951-956. doi: 10.1557/jmr.2011.21

Effect of thermal exposure on the room temperature tensile properties of Grade 2 titanium

Dobeson, Richard, Petrazoller, Nicolas, Dargusch, Matthew and McDonald, Stuart (2011). Effect of thermal exposure on the room temperature tensile properties of Grade 2 titanium. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 528 (10-11), 3925-3929. doi: 10.1016/j.msea.2011.01.086

Strength enhancement of a biomedical titanium alloy through a modified accumulative roll bonding technique

Kent, Damon, Wang, Gui, Yu, Zhentao, Ma, Xiqun and Dargusch, Matthew (2011). Strength enhancement of a biomedical titanium alloy through a modified accumulative roll bonding technique. Journal of the Mechanical Behavior of Biomedical Materials, 4 (3), 405-416. doi: 10.1016/j.jmbbm.2010.11.013

The effect of contamination on the metallurgy of commercially pure titanium welded with a pulsed laser beam

Buddery, A, Kelly, P, Drennan, J and Dargusch, M (2011). The effect of contamination on the metallurgy of commercially pure titanium welded with a pulsed laser beam. Journal of Materials Science, 46 (8), 2726-2732. doi: 10.1007/s10853-010-5145-5

Preparation and osteoinduction of active micro-arc oxidation films on Ti-3Zr-2Sn-3Mo-25Nb alloy

Yu, Sen, Yu, Zhen-tao, Wang, Gui, Han, Jian-ye, Ma, Xi-qun and Dargusch, Matthew S. (2011). Preparation and osteoinduction of active micro-arc oxidation films on Ti-3Zr-2Sn-3Mo-25Nb alloy. Transactions of Nonferrous Metals Society of China, 21 (3), 573-580. doi: 10.1016/S1003-6326(11)60753-X

Influence of Re on the properties of a NiCoCrAlY coating alloy

Liang, J. J., Wei, H., Zhu, Y. L., Sun, X. F., Hu, Z. Q., Dargusch, M. S. and Yao, X. D. (2011). Influence of Re on the properties of a NiCoCrAlY coating alloy. Journal of Materials Science and Technology, 27 (5), 408-414. doi: 10.1016/S1005-0302(11)60083-2

Phase constituents and thermal expansion behavior of a NiCrAlYRe coating alloy

Liang, J. J., Wei, H., Zhu, Y. L., Hu, Z. Q., Dargusch, M. S. and Yao, X. (2011). Phase constituents and thermal expansion behavior of a NiCrAlYRe coating alloy. Journal of Materials Science, 46 (2), 500-508. doi: 10.1007/s10853-010-4953-y

Machining Ti–6Al–4V alloy with cryogenic compressed air cooling

Sun, S., Brandt, M. and Dargusch, M. S. (2010). Machining Ti–6Al–4V alloy with cryogenic compressed air cooling. International Journal of Machine Tools and Manufacture, 50 (11), 933-942. doi: 10.1016/j.ijmachtools.2010.08.003

Strengthening of cast Ti-25Nb-3Mo-3Zr-2Sn alloy through precipitation of α in two discrete crystallographic orientations

Paladugu, Mohanchand, Kent, Damon, Wang, Gui, Yu, Zhentao and Dargusch, Matthew S. (2010). Strengthening of cast Ti-25Nb-3Mo-3Zr-2Sn alloy through precipitation of α in two discrete crystallographic orientations. Materials Science and Engineering A, 527 (24-25), 6601-6606. doi: 10.1016/j.msea.2010.06.075

Effects of boron on microstructure in cast zirconium alloys

Dargusch, M. S., Bermingham, M. J., McDonald, S. D. and St John, D. H. (2010). Effects of boron on microstructure in cast zirconium alloys. Journal of Materials Research, 25 (9), 1695-1700. doi: 10.1557/JMR.2010.0233

Recycling of titanium machining chips by severe plastic deformation consolidation

Luo, P., Xie, H., Paladugu, M., Palanisamy, S., Dargusch, M. S. and Xia, K. (2010). Recycling of titanium machining chips by severe plastic deformation consolidation. Journal of Materials Science, 45 (17), 4606-4612. doi: 10.1007/s10853-010-4443-2

Thermally enhanced machining of hard-to-machine materials-A review

Sun, S., Brandt, M. and Dargusch, M. S. (2010). Thermally enhanced machining of hard-to-machine materials-A review. International Journal of Machine Tools and Manufacture, 50 (8), 663-680. doi: 10.1016/j.ijmachtools.2010.04.008

Corrigendum to "Pseudoelastic behaviour of a beta Ti–25Nb–3Zr–3Mo–2Sn alloy" [Mater. Sci. Eng. A 527 (2010) 2246–2252]

Kent, D., Wang, G., Yu, Z. and Dargusch, M. S. (2010). Corrigendum to "Pseudoelastic behaviour of a beta Ti–25Nb–3Zr–3Mo–2Sn alloy" [Mater. Sci. Eng. A 527 (2010) 2246–2252]. Materials Science and Engineering: A, 527 (16-17), 4524-4524. doi: 10.1016/j.msea.2010.03.060

The Effect of a Laser Beam on Chip Formation during Machining of Ti6Al4V Alloy

Sun, S., Brandt, M. and Dargusch, M. S. (2010). The Effect of a Laser Beam on Chip Formation during Machining of Ti6Al4V Alloy. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 41A (6), 1573-1581. doi: 10.1007/s11661-010-0187-5

Comparison of valence-band structures of NiAl alloy containing Cr and Ti: Photoelectron spectrum and first-principles calculations

Wei, H., Liang, J. J., Sun, B. Z., Peng, P., Zheng, Q., Sun, X. F., Dargusch, M. S. and Yao, X. (2010). Comparison of valence-band structures of NiAl alloy containing Cr and Ti: Photoelectron spectrum and first-principles calculations. Intermetallics, 18 (5), 1062-1066. doi: 10.1016/j.intermet.2010.02.004

Pseudoelastic behaviour of a beta Ti-25Nb-3Zr-3Mo-2Sn alloy

Kent, D., Wang, G., Yu, Z. and Dargusch, M. S. (2010). Pseudoelastic behaviour of a beta Ti-25Nb-3Zr-3Mo-2Sn alloy. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 527 (9), 2246-2252. doi: 10.1016/j.msea.2009.11.059

Interdiffusion within the beta-phase region of the Ni-Co-Cr-Al quaternary system

Wei, H., Zhang, H. Y., Sun, X. F., Dargusch, M. S. and Yao, X. (2010). Interdiffusion within the beta-phase region of the Ni-Co-Cr-Al quaternary system. Journal of Alloys and Compounds, 493 (1-2), 507-516. doi: 10.1016/j.jallcom.2009.12.146

The effect of aluminium content on the eutectic morphology of high pressure die cast magnesium-aluminium alloys

Dargusch, M. S., Nave, M., McDonald, S. D. and StJohn, D. H. (2010). The effect of aluminium content on the eutectic morphology of high pressure die cast magnesium-aluminium alloys. Journal of Alloys and Compounds, 492 (1-2), L64-L68. doi: 10.1016/j.jallcom.2009.11.199

Titanium as an endogenous grain-refining nucleus

Bermingham, M. J., McDonald, S. D., St John, D. H. and Dargusch, M. S. (2010). Titanium as an endogenous grain-refining nucleus. Philosophical Magazine, 90 (6), 699-715. doi: 10.1080/14786430903236057

A predictive model for the evolution of the thermal conductance at the casting-die interfaces in high pressure die casting

Hamasaiid, A, Dour, G, Loulou, T and Dargusch, MS (2010). A predictive model for the evolution of the thermal conductance at the casting-die interfaces in high pressure die casting. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 49 (2), 365-372. doi: 10.1016/j.ijthermalsci.2009.07.014

Histocompatibility and osteogenic activity of Ti5Zr6Mo15Nb alloy with surface modification by porous TiO2 /HA coating

Yu, Sen, Yu, Zhentao, Han, Jianye, Niu, Jinlong, Wang, Gui and Dargusch, Matthew S. (2010). Histocompatibility and osteogenic activity of Ti5Zr6Mo15Nb alloy with surface modification by porous TiO2 /HA coating. Jinshu Rechuli [Heat Treatment of Metals], 35 (9), 31-36.

Site preference of Ru in NiAl and valence band structure of NiAl containing Ru: First-principles study and photoelectron spectrum

Wei, H., Liang, J. J., Sun, B. Z., Zheng, Q., Sun, X. F., Peng, P., Dargusch, M. S. and Yao, X. (2010). Site preference of Ru in NiAl and valence band structure of NiAl containing Ru: First-principles study and photoelectron spectrum. Philosophical Magazine Letters, 90 (4), 225-232. doi: 10.1080/09500830903520712

Valence band structure of the NiAl-Mo alloy from the photoelectron spectrum

Wei, H., Liang, J. J., Peng, P., Zheng, Q., Sun, X. F., Sun, B. Z., Dargusch, M. S. and Yao, X. (2010). Valence band structure of the NiAl-Mo alloy from the photoelectron spectrum. Philosophical Magazine Letters, 90 (5), 299-311. doi: 10.1080/09500831003636069

Interfacial heat transfer during die casting of an Al-Si-Cu alloy

Hamasaiid, A., Wang, G., Davidson, C., Dour, G. and Dargusch, M. S. (2009). Interfacial heat transfer during die casting of an Al-Si-Cu alloy. Metallurgical and materials transactions. A, Physical metallurgy and materials science, 40 (13), 3056-3058. doi: 10.1007/s11661-009-0048-2

Review of laser assisted machining of ceramic

Sun, S., Brandt, M. and Dargusch, M. S. (2009). Review of laser assisted machining of ceramic. Zhongguo Jiguang [Chinese Journal of Lasers], 36 (12), 3299-3307. doi: 10.3788/CJL20093612.3299

Elevated temperature mechanical properties and microstructures of high pressure die cast magnesium AZ91 alloy cast with different section thicknesses

Dargusch, M. S., Easton, M. A., Zhu, S. M. and Wang, G. (2009). Elevated temperature mechanical properties and microstructures of high pressure die cast magnesium AZ91 alloy cast with different section thicknesses. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 523 (1-2), 282-288. doi: 10.1016/j.msea.2009.06.015

Latest developments in understanding grain refinement of cast titanium

Bermingham, Michael, McDonald, Stuart, Dargusch, Matthew and St John, David (2009). Latest developments in understanding grain refinement of cast titanium. Light Metals Age, 67 (4), 47-49.

On interdiffusion in the multicomponent beta-NiAl phase

Wei, H., Zhang, H. Y., Hou, G. C., Sun, X. F., Dargusch, M. S., Yao, X. and Hu, Z. Q. (2009). On interdiffusion in the multicomponent beta-NiAl phase. Journal of Alloys and Compounds, 481 (1-2), 326-335. doi: 10.1016/j.jallcom.2009.02.130

Beryllium as a grain refiner in titanium alloys

Bermingham, M. J., McDonald, S. D., StJohn D. H. and Dargusch, M. S. (2009). Beryllium as a grain refiner in titanium alloys. Journal of Alloys and Compounds, 481 (1-2), L20-L23. doi: 10.1016/j.jallcom.2009.03.016

Effects of coolant pressure on chip formation while turning Ti6Al4V alloy

Palanisamy, Suresh, McDonald, Stuart D. and Dargusch, Matthew S. (2009). Effects of coolant pressure on chip formation while turning Ti6Al4V alloy. International Journal of Machine Tools and Manufacture, 49 (9), 739-743. doi: 10.1016/j.ijmachtools.2009.02.010

Shape memory characteristics of a near beta titanium alloy

Yu, Z., Wang, G., Ma, X., Zhang, Y. and Dargusch, M. S. (2009). Shape memory characteristics of a near beta titanium alloy. Materials Science And Engineering A: Structural Materials Properties Microstructure and Processing, 513-514 (C), 233-238. doi: 10.1016/j.msea.2009.01.077

Site preference of Re in NiAl and valence band structure of NiAl containing Re: First-principles study and photoelectron spectrum

Wei, H., Liang, J. J., Sun, B. Z., Zheng, Q., Sun, X. F., Peng, P., Yao, X. and Dargusch, M. S. (2009). Site preference of Re in NiAl and valence band structure of NiAl containing Re: First-principles study and photoelectron spectrum. Applied Physics Letters, 94 (23) 233104, 233104.1-233104.3. doi: 10.1063/1.3152267

Characteristics of cutting forces and chip formation in machining of titanium alloys

Sun, S., Brandt, M. and Dargusch, M.S. (2009). Characteristics of cutting forces and chip formation in machining of titanium alloys. INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 49 (7-8), 561-568. doi: 10.1016/j.ijmachtools.2009.02.008

Segregation and grain refinement in cast titanium alloys

Bermingham, M. J., McDonald, S. D., StJohn, D. H. and Dargusch, M. S. (2009). Segregation and grain refinement in cast titanium alloys. Journal of Materials Research, 24 (4), 1529-1535. doi: 10.1557/JMR.2009.0173

Evaluation of haemocompatibility of TLM titanium alloy with surface heparinization

Yu, S., Yu, Z. T., Wang, G., Dargusch, M. S. and Zhang, M. H. (2009). Evaluation of haemocompatibility of TLM titanium alloy with surface heparinization. Rare Metal Materials and Engineering, 38 (3), 384-388. doi: 10.1016/S1875-5372(10)60023-9

Microstructural analysis of the improved creep resistance of a die-cast magnesium–aluminium–rare earth alloy by strontium additions

Dargusch, Matthew S., S.M. Zhub, J.F. Nieb and G.L. Dunlop (2009). Microstructural analysis of the improved creep resistance of a die-cast magnesium–aluminium–rare earth alloy by strontium additions. Scripta Materialia, 60 (2), 116-119. doi: 10.1016/j.scriptamat.2008.09.013

Surface bio-modification by TiO2 film on TLM biomedical titanium alloy

Sen, Yu, Zhentao, Yu, Jianye, Han, Xiqun, Ma, Wang, Gui and Dargusch, Matthew S. (2009). Surface bio-modification by TiO2 film on TLM biomedical titanium alloy. Heat treatment of Metals, 34 (3), 63-67.

An inverse model to determine the heat transfer coefficient and its evolution with time during solidification of light alloys

Dargusch, M. S., Hamasaiid, A. and Dour, G. (2008). An inverse model to determine the heat transfer coefficient and its evolution with time during solidification of light alloys. International Journal of Nonlinear Sciences and Numerical Simulation, 9 (3), 275-282. doi: 10.1515/IJNSNS.2008.9.3.275

Effects of boron on microstructure in cast titanium alloys

Bermingham, M., McDonald, S.D., Nogita, K., St John, D.H. and Dargusch, M.S. (2008). Effects of boron on microstructure in cast titanium alloys. Scripta Materialia, 59 (5), 538-541. doi: 10.1016/j.scriptamat.2008.05.002

Investigation into the effect of nucleation parameters on grain formation during solidification using a cellular automaton-finite control volume method

Yao, X., Dargusch, M.S., Dahle, A.K., Davidson, C.J. and St John, D.H. (2008). Investigation into the effect of nucleation parameters on grain formation during solidification using a cellular automaton-finite control volume method. Journal of Materials Research, 23 (9), 2312-2325. doi: 10.1557/JMR.2008.0303

Effect of abrasive mineral on alloy performance in the ball mill abrasion test

Gates, J. D., Dargusch, M. S., Walsh, J. J., Field, S. L., Hermand, M. J. -P., Delaup, B. G. and Saad, J. R. (2008). Effect of abrasive mineral on alloy performance in the ball mill abrasion test. Wear, 265 (5-6), 865-870. doi: 10.1016/j.wear.2008.01.008

The mechanism of grain refinement of titanium by silicon

Bermingham, M., McDonald, S.D., Dargusch, M.S. and St John, D.H. (2008). The mechanism of grain refinement of titanium by silicon. Scripta Materialia, 58 (12), 1050-1053. doi: 10.1016/j.scriptamat.2008.01.041

Heat-transfer coefficient and in-cavity pressure at the casting-die interface during high-pressure die casting of the magnesium alloy AZ91D

Hamasaiid, A., Dour, G., Dargusch, M.S., Loulou, T., Davidson, C. and Savage, G. (2008). Heat-transfer coefficient and in-cavity pressure at the casting-die interface during high-pressure die casting of the magnesium alloy AZ91D. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 39A (4), 853-864. doi: 10.1007/s11661-007-9452-7

Subsurface deformation after dry machining of Grade 2 titanium

Dargusch, Matthew Simon, Zhang, Ming-Xing, Palanisamy, Suresh, Buddery, Alexander John Michael and StJohn, David Henry (2008). Subsurface deformation after dry machining of Grade 2 titanium. Advanced Engineering Materials, 10 (1-2), 85-88. doi: 10.1002/adem.200700233

Grain-refinement mechanisms in titanium alloys

Bermingham, M., McDonald, S.D., Dargusch, M.S. and St John, D.H. (2008). Grain-refinement mechanisms in titanium alloys. Journal of Materials Research, 23 (1), 97-104. doi: 10.1557/JMR.2008.0002

A rationale for the acoustic monitoring of surface deformation in Ti6Al4V alloys during machining

Palanisamy, S., Dargusch, M. S., McDonald, S., St John, D. H. and Brandt, M. (2007). A rationale for the acoustic monitoring of surface deformation in Ti6Al4V alloys during machining. Advanced Engineering Materials, 9 (11), 1000-1004. doi: 10.1002/adem.200700117

Effect of mold coating materials and thickness on heat transfer in permanent mold casting of aluminum alloys

Hamasaiid, A., Dargusch, M. S., Davidson, C. J., Tovar, S., Loulou, T., Rezai-Aria, F. and Dour, G. (2007). Effect of mold coating materials and thickness on heat transfer in permanent mold casting of aluminum alloys. Metallurgical and Materials Transactions A, 38A (6), 1303-1316. doi: 10.1007/s11661-007-9145-2

Microstructure of cast titanium alloys

Bermingham, M., McDonald, S.D., Dargusch, M.S. and St John, D.H. (2007). Microstructure of cast titanium alloys. Materials Forum, 31, 84-89.

The accurate determination of heat transfer coefficient and its evolution with time during high pressure die casting of Al-9%Si-3%Cu and Mg-9%Al-1%Zn alloys

Dargusch, M.S., Hamasaiid, A., Dour, G., Loulou, T., Davidson, C.J. and St John, D.H. (2007). The accurate determination of heat transfer coefficient and its evolution with time during high pressure die casting of Al-9%Si-3%Cu and Mg-9%Al-1%Zn alloys. Advanced Engineering Materials, 9 (11), 995-999. doi: 10.1002/adem.200700189

Recommendations and guidelines for the performance of accurate heat transfer measurements in rapid forming processes

Dour, G, Dargusch, M and Davidson, C (2006). Recommendations and guidelines for the performance of accurate heat transfer measurements in rapid forming processes. International Journal of Heat And Mass Transfer, 49 (11-12), 1773-1789. doi: 10.1016/j.ijheatmasstransfer.2005.10.045

The effect of aluminium content on the mechanical properties and microstructure of die cast binary magnesium-aluminium alloys

Dargusch, M. S., Pettersen, K., Nogita, K., Nave, M. D. and Dunlop, G. L. (2006). The effect of aluminium content on the mechanical properties and microstructure of die cast binary magnesium-aluminium alloys. Materials Transactions, 47 (4), 977-982. doi: 10.2320/matertrans.47.977

The influence of pressure during solidification of high pressure die cast aluminium telecommunications components

Dargusch, M. S., Dour, G., Schauer, N., Dinnis, C. M. and Savage, G. (2006). The influence of pressure during solidification of high pressure die cast aluminium telecommunications components. Journal of Materials Processing Technology, 180 (1-3), 37-43. doi: 10.1016/j.jmatprotec.2006.05.001

Development of a non-intrusive heat transfer coefficient gauge and its application to high pressure die casting Effect of the process parameters

Dour, G., Dargusch, M. S., Davidson, C. and Nef, A. (2005). Development of a non-intrusive heat transfer coefficient gauge and its application to high pressure die casting Effect of the process parameters. Journal of Materials Processing Technology, 169 (2), 223-233. doi: 10.1016/j.jmatprotec.2005.03.026

Manufacture of high pressure die-cast radio frequency filter bodies

Dargusch, M. S., Wang, G., Schauer, N., Dinnis, C. M. and Savage, G. (2005). Manufacture of high pressure die-cast radio frequency filter bodies. International Journal Of Cast Metals Research, 18 (1), 47-53. doi: 10.1179/136404605225022784

The effect of silicon content on the microstructure and creep behavior in die-cast magnesium AS alloys

Dargusch, M. S., Bowles, A. L., Pettersen, K., Bakke, P. and Dunlop, G. L. (2004). The effect of silicon content on the microstructure and creep behavior in die-cast magnesium AS alloys. Metallurgical and Materials Transactions A, Physical Metallurgy And Materials Science, 35 (6), 1905-1909. doi: 10.1007/s11661-004-0099-3

Grain size measurements in Mg-Al high pressure die castings using electron back-scattered diffraction (EBSD)

Bowles, A. L., Nogita, K., Dargusch, M. S., Davidson, C. and Griffiths, J. (2004). Grain size measurements in Mg-Al high pressure die castings using electron back-scattered diffraction (EBSD). Materials Transactions, 45 (11), 3114-3119. doi: 10.2320/matertrans.45.3114

Microstructure and mechanical properties of high pressure die cast magnesium alloy AE42 with 1% strontium

Dargusch, MS, Pettersen, K, Bakke, P, Nogita, K, Bowles, AL and Dunlop, GL (2004). Microstructure and mechanical properties of high pressure die cast magnesium alloy AE42 with 1% strontium. International Journal of Cast Metals Research, 17 (3), 170-173. doi: 10.1179/136404604225017555

Influence of microstructure on the corrosion of diecast AZ91D

Song, Guangling, Atrens, Andrej and Dargusch, Matthew (1999). Influence of microstructure on the corrosion of diecast AZ91D. Corrosion Science, 41 (2), 249-273. doi: 10.1016/S0010-938X(98)00121-8

Fabrication of highly porous titanium scaffolds using metal injection moulding and space holder

Dehghan-Manshadi, A., StJohn, D. H., Dargusch, M. S. and Qian, M. (2020). Fabrication of highly porous titanium scaffolds using metal injection moulding and space holder. European Powder Metallurgy Congress and Exhibition (Euro PM 2018), Bilbao, Spain, 14-18 October 2018. Brussels, Belgium: European Powder Metallurgy Association (EPMA).

Revealing the mechanisms of grain nucleation and formation during additive manufacturing

Bermingham, Michael, StJohn, David, Easton, Mark, Yuan, Lang and Dargusch, Matthew (2020). Revealing the mechanisms of grain nucleation and formation during additive manufacturing. 2nd Asia-Pacific International Conference on Additive Manufacturing (APICAM 2019), Melbourne, VIC Australia, 1 - 3 July 2019. New York, NY, United States: Springer. doi: 10.1007/s11837-020-04019-5

Cellular automation finite element modeling of the evolution of the as-cast microstructure of an ultrasonically treated al-2cu alloy

Wang, Gui, Croaker, Paul, Dargusch, Matthew, McGuckin, Damian and StJohn, David (2019). Cellular automation finite element modeling of the evolution of the as-cast microstructure of an ultrasonically treated al-2cu alloy. Light Metals Symposium held at the TMS Annual Meeting and Exhibition, 2019, San Antonio, TX, March 10, 2019-March 14, 2019. CHAM: Springer International Publishing. doi: 10.1007/978-3-030-05864-7_205

Mechanisms of grain formation during ultrasonic solidification of commercial purity magnesium

Nagasivamuni, B., Wang, Gui, St John, David H. and Dargusch, Matthew S. (2019). Mechanisms of grain formation during ultrasonic solidification of commercial purity magnesium. Light Metals Symposium, TMS Annual Meeting and Exhibition, San Antonio, TX, United States, 10-14 March 2019. Cham, Switzerland: Springer International. doi: 10.1007/978-3-030-05864-7_200

Material perspectives of the dental implants: A review

Wang, Gui, Dargusch, Matthew and Doan, Nghiem (2018). Material perspectives of the dental implants: A review. 6th International Conference on the Development of Biomedical Engineering in Vietnam, BME 2016, Ho Chi Minh, Vietnam, 27-29 June 2016. Singapore, Singapore: Springer Verlag. doi: 10.1007/978-981-10-4361-1_76

The challenges associated with the formation of equiaxed grains during additive manufacturing of titanium alloys

StJohn, David H., McDonald, Stuart D., Bermingham, Michael J., Mereddy, Sri, Prasad, Arvind and Dargusch, Matthew (2018). The challenges associated with the formation of equiaxed grains during additive manufacturing of titanium alloys. 4th International Conference on Powder Metallurgy of Titanium, PMTi 2017, Xian, China, 8-10 September 2017. Trans Tech Publications Ltd. doi: 10.4028/www.scientific.net/KEM.770.155

Influence of flash treatment on pseudoelastic behaviour of biomedical Ti-25Nb-3Zr-3Mo-2Sn alloy

Zhu, Suming, Zhu, Yuman, Dargusch, Matthew and Nie, Jian-Feng (2017). Influence of flash treatment on pseudoelastic behaviour of biomedical Ti-25Nb-3Zr-3Mo-2Sn alloy. 9th International Conference on Processing and Manufacturing of Advanced Materials, THERMEC 2016, Graz Austria, 29 May - 3 June 2016. Pfaffikon, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.879.1375

Effect of Ultrasonic Treatment on The As-Cast Grain Structure during The Solidification of An Al-2Cu Alloy

Wang, Gui, Dargusch, Matthew S. and St John, David H. (2016). Effect of Ultrasonic Treatment on The As-Cast Grain Structure during The Solidification of An Al-2Cu Alloy. The Ninth Pacific Rim International Conference on Advanced Materials and Processing, Kyoto, Japan, 1-5 August 2016.

Grain Refinement of an Al-2 wt%Cu Alloy by Al3Ti1B Master Alloy and Ultrasonic Treatment

Wang, E. Q., Wang, G., Dargusch, M. S., Qian, M., Eskin, D. G. and StJohn, D. H. (2016). Grain Refinement of an Al-2 wt%Cu Alloy by Al3Ti1B Master Alloy and Ultrasonic Treatment. 4th International Conference on Advances in Solidification Processes, ICASP 2014, Windsor, United Kingdom, 8 - 11 July 2014. Bristol, United Kingdom: Institute of Physics Publishing. doi: 10.1088/1757-899X/117/1/012050

Grain refinement of Al-Si hypoeutectic alloys by Al3Ti1B master alloy and ultrasonic treatment

Wang, Gui, Wang, Eric Qiang, Prasad, Arvind, Dargusch, Matthew and StJohn, David H. (2016). Grain refinement of Al-Si hypoeutectic alloys by Al3Ti1B master alloy and ultrasonic treatment. Shape Casting: 6th International Symposium, Nashville, Tennessee, United States, 14-18 February 2016. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781119274865.ch18

Progressive matrix cracking induced delamination: A comparison of finite element modelling techniques

Reiner, J., Veidt, M., Dargusch, M. and Gross, L. (2016). Progressive matrix cracking induced delamination: A comparison of finite element modelling techniques. 17th European Conference on Composite Materials, ECCM 2016, Munich, Germany, 26 - 30 June 2016. Munich, Germany: European Conference on Composite Materials, ECCM.

Selection of densification strain to predict dynamic crushing stress at high impact velocity of ALPORAS aluminium foam

Yahaya, M. A., Ruan, R., Lu, G., Dargusch, M. S. and Yu, T. X. (2015). Selection of densification strain to predict dynamic crushing stress at high impact velocity of ALPORAS aluminium foam. 12th Asia-Pacific Conference on Engineering Plasticity and Its Application, AEPA 2014, Kaohsiung, Taiwan, 1-5 September 2014. Pfaffikon, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/KEM.626.383

A computational investigation of failure modes in fibre metal laminates

Reiner, Johannes, Veidt, Martin, Dargusch, Matthew and Gross, Lutz (2014). A computational investigation of failure modes in fibre metal laminates. ACAM 8: 8th Australasian Congress on Applied Mechanics, Melbourne, VIC, Australia, 23-26 November, 2014. Barton, ACT, Australia: Engineers Australia.

Comparison of endmill tool coating performance during machining of Ti6Al4V alloy

Palanisamy, S., Rahman Rashid, R. A., Brandt, M., Sun, S. and Dargusch, M. S. (2014). Comparison of endmill tool coating performance during machining of Ti6Al4V alloy. 5th International Conference on Material and Manufacturing Technology (ICMMT 2014), Kuala Lumpur, Malaysia, 8-9 May 2014. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/AMR.974.126

Laser assisted machining of Ti10V2Fe3Al and Ti6Cr5Mo5V4Al β titanium alloys

Rahman Rashid, R. A., Sun, S., Palanisamy, S. and Dargusch, M. S. (2014). Laser assisted machining of Ti10V2Fe3Al and Ti6Cr5Mo5V4Al β titanium alloys. 5th International Conference on Material and Manufacturing Technology (ICMMT 2014), Kuala Lumpur, Malaysia, 8-9 May 2014. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/AMR.974.121

Tool life study of coated/uncoated carbide inserts during turning of Ti6Al4V

Palanisamy, S., Rahman Rashid, R. A., Brandt, M. and Dargusch, M. S. (2014). Tool life study of coated/uncoated carbide inserts during turning of Ti6Al4V. 5th International Conference on Material and Manufacturing Technology (ICMMT 2014), Kuala Lumpur, Malaysia, 8-9 May 2014. Pfaffikon, Switzerland: Scientific.Net. doi: 10.4028/www.scientific.net/AMR.974.136

Comparison of phantom node and extended finite element method for damage evaluation in composite laminates

Johannes Reiner, Veidt, Martin, Dargusch, Matthew S. and Gross, L. (2013). Comparison of phantom node and extended finite element method for damage evaluation in composite laminates. 5th Asia Pacific Congress on Computational Mechanics (APCOM V) and the 4th International Symposium on Computational Mechanics (ISCM VI), Singapore, 11-13 December 2013. Barcelona, Spain: International Association for Computational Mechanics.

Experimental investigation of various chip parameters during machining of the Ti25nb3mo3zr2sn beta titanium alloy

Rashid, Raham Rashid Rahman, Sun, C., Wang, Gui and Dargusch, Matthew S. (2013). Experimental investigation of various chip parameters during machining of the Ti25nb3mo3zr2sn beta titanium alloy. Stafa-Zurich, 8712 Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.622-623.366

FEA modelling of cutting force and chip formation in thermally assisted machining of Ti6Al4V alloy

Xi, Yao, Bermingham, Michael, Wang, Gui and Dargusch, Matthew (2013). FEA modelling of cutting force and chip formation in thermally assisted machining of Ti6Al4V alloy. LMT 2013: 6th International Light Metals Technology Conference, Old Windsor, UK, 24-26 July, 2013. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.765.343

Composite modelling of a two-phase titanium alloy

Zhong, Jikang, Dargusch, Matthew S. and Davies, Chris (2012). Composite modelling of a two-phase titanium alloy. 12th World Conference on Titanium (Ti-2011 ), Beijing, China, 19-24 June 2011. Beijing, China: Science Press.

Development of ultrafine and nano-crystalline grain structures during modified accumulative roll bonding of titanium alloy, Ti-25Nb-3Zr-3Mo-2Sn

Kent, Damon, Wang, Gui, Yu, Zhentao, Ma, Xiqun and Dargusch, Matthew S. (2012). Development of ultrafine and nano-crystalline grain structures during modified accumulative roll bonding of titanium alloy, Ti-25Nb-3Zr-3Mo-2Sn. 12th World Conference on Titanium (Ti-2011 ), Beijing, China, 19-24 June 2011. Beijing, China: Science Press.

Effect of heat treatment on microstructure and mechanical properties of titanium recycled by severe plastic deformation

McDonald, D. T., Davies, A. J., Luo, P., Zhu, S. M., Palanisamy, S., Dargusch, M. S. and Xia, K. (2012). Effect of heat treatment on microstructure and mechanical properties of titanium recycled by severe plastic deformation. 12th World Conference on Titanium, Ti 2011, Beijing, 19 - 24 June 2011. Beijiing, China: Science Press.

Review of recent titanium research in Australia

Palanisamy, S., Dargusch, M. S., Sun, S., Bermingham, M. J., Wen, C. E., Wang, G., Xia, K. and StJohn, D. H. (2012). Review of recent titanium research in Australia. 12th World Conference on Titanium, Ti 2011, Beijing, China, 19-24 June 2011. Beijing, China: Science Press.

Solid-state recycling of titanium machining chips by severe plastic deformation

Luo P., McDonald D.T., Palanisamy S., Dargusch M.S. and Xia K. (2012). Solid-state recycling of titanium machining chips by severe plastic deformation. 12th World Conference on Titanium (Ti-2011 ), Beijing, China, 19-24 June 2011. Beijing, China: Science Press Beijing.

Ti-6Al-4V recycled from machining chips by equal channel angular pressing

McDonald, D.T., Luo, P., Palanisamy, S., Dargusch, M. S. and Xia, K. (2012). Ti-6Al-4V recycled from machining chips by equal channel angular pressing. 1st International Conference on Powder Processing, Consolidation and Metallurgy of Titanium, Brisbane, Australia, 4-7 December 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/KEM.520.295

Effect of pulsed current on the microstructure and distribution of C and Mn in an Fe-0.5C-1.5Mn alloy

Wang, Hai Chuan, Hong, Peng, Liao, Zhiyou, Li, Xin, Li, Jie, Wang, Gui, Wang, Shijun and Dargusch, Matthew S. (2011). Effect of pulsed current on the microstructure and distribution of C and Mn in an Fe-0.5C-1.5Mn alloy. 2010 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2010), Shenzhen, China, 6-8 November 2010. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.146-147.1612

Effect of pulsed electric field on the distribution and migration of P, S, and Si elements of Fe-based alloys

Liao, Zhiyou, Wang, Haichuan, Hong, Ping, Li, Xin, Li, Ji, Wang, Shijun, Wang, Gui and Dargusch, Matthew S. (2011). Effect of pulsed electric field on the distribution and migration of P, S, and Si elements of Fe-based alloys. 2nd International Conference on Manufacturing Science and Engineering, Guilin, China, 9-11 April 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.194-196.371

Effect of static magnetic field on distribution of elements in the Fe-S, Fe-Si, and Fe-Mn alloys

Wang, Haichuan, Liao, Zhiyou, Pang, Ruipeng, Hong, Peng, Wang, Shijun, Li, Jie, Wang, Gui and Dargusch, Matthew S. (2011). Effect of static magnetic field on distribution of elements in the Fe-S, Fe-Si, and Fe-Mn alloys. 2nd International Conference on Manufacturing Science and Engineering (ICMSE 2011), Guilin, China, 9-11 April 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.194-196.367

Effect of ultrasonic power on the microstructure and hardness of commercially pure aluminum

Wang, Haichuan, Liu, Dan, Liao, Zhiyou, Li, Ming, Jie, Li, Wang, Gui and Dargusch, Matthew S. (2011). Effect of ultrasonic power on the microstructure and hardness of commercially pure aluminum. 2nd International Conference on Manufacturing Science and Engineering, Guilin, China, 9-11 April 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.194-196.1192

Machining of titanium alloys with and without coolant

Palanisamy, S., Dargusch, M. S., McDonald, S. D. and St John, D. H. (2011). Machining of titanium alloys with and without coolant. 5th International Conference on Light Metals Technology, Lüneburg, Germany, 19-22 July 2011. Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.690.481

The aging response of a metastable β Ti alloy, BTi-6554

Wang, Yongqiang, Wang, Gui, Wang, Weiqi, Kent, Damon and Dargusch, Matthew S. (2011). The aging response of a metastable β Ti alloy, BTi-6554. The 5th International Light Metals Technology Conference (LMT 2011), Lüneburg, Germany, 19–22 July 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.690.29

The effect of HIPping on the microstructure and tensile properties of cast BTi-6554 alloy

Wang, Yongmei, Wang, Gui, Wang, Weiqi, Kent, Damon and Dargusch, Matthew S. (2011). The effect of HIPping on the microstructure and tensile properties of cast BTi-6554 alloy. The 5th International Light Metals Technology Conference (LMT 2011), Lüneburg, Germany, 19–22 July 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.690.33

Building capability through benchmarking and technology transfer

Hodge, R. M., Palanisamy, S. and Dargusch, M. S. (2010). Building capability through benchmarking and technology transfer. 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2 - 6 August 2010. Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.602

Effect of Zr addition on microstructure and warm formability of Al-Mg sheet alloys

Zhu, Hanliang and Dargusch, M. (2010). Effect of Zr addition on microstructure and warm formability of Al-Mg sheet alloys. Pacific Rim International Conference on Advanced Materials and Processing, Cairns, QLD, Australia, 2-6 August 2010. Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.1010

Effect of oxygen on the beta-grain size of cast titanium

Bermingham, Michael J., McDonald, Stuart D., Dargusch, Matthew S. and StJohn, David H. (2010). Effect of oxygen on the beta-grain size of cast titanium. 7th Pacific Rim International Conference on Advanced Materials and Processing, PRICM-7, Cairns, QLD, Australia, 2-6 August 2010. Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.1472

Influence of heat treatment on the pseudoelastic behaviour of a beta Ti-25Nb-3Zr-3Mo-2Sn alloy

Kent, Damon, Wang,Gui, Zheng, Li Hui, Yu, Zhen Tao and Dargusch, Matthew S. (2010). Influence of heat treatment on the pseudoelastic behaviour of a beta Ti-25Nb-3Zr-3Mo-2Sn alloy. 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 7), Cairns, QLD, Australia, 2-6 August 2010. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.871

Investigation of the cutting forces and tool wear in laser assisted milling of Ti6Al4V Alloy

Sun, S., Brandt, M., Barnes, J. E. and Dargusch, M. S. (2010). Investigation of the cutting forces and tool wear in laser assisted milling of Ti6Al4V Alloy. 36th International MATADOR Conference, Manchester, Lancashire, , July 14, 2010-July 16, 2010. Springer London. doi: 10.1007/978-1-84996-432-6_59

Microstructural evolution in chips during machining of commercially pure (Grade 2) titanium

Sun, SJ, Brandt, M, Song, WQ and Dargusch, MS (2010). Microstructural evolution in chips during machining of commercially pure (Grade 2) titanium. 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 7), Cairns, QLD, Australia, 2-6 August 2010. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.823

Microstructure characterization of laser welded near-beta titanium alloy 'TLM' under different process conditions

Buddery, A, Wang, G, Yu, ZT, Dargusch, M and Nabulsi, S (2010). Microstructure characterization of laser welded near-beta titanium alloy 'TLM' under different process conditions. 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 7), Cairns, Qld., Australia, 2-6 August 2010. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.2146

Modelling the high temperature deformation of Ti-6Al-4V

Zhong, J., Dargusch, M. and Davies, C. (2010). Modelling the high temperature deformation of Ti-6Al-4V. 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 7), Cairns, Australia, 02-06 August, 2010. Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.879

The effect of temperature on the microstructure of a metastable beta titanium alloy

Wang, Gui, Wang, Weiqi, Yang, Yulan, Kent, Damon and Dargusch, Matthew S. (2010). The effect of temperature on the microstructure of a metastable beta titanium alloy. Pacific Rim International Conference on Advanced Materials and Processing, Cairns, QLD, Australia, 2-6 August 2010. Stafa-Zurich ; United Kingdom: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.847

Tool failure criteria while drilling titanium alloys

Palanisamy, Suresh, Cong, Luo, Verijenko, Viktor, McDonald, Stuart D., Owen, Robert and Dargusch, Matthew S. (2010). Tool failure criteria while drilling titanium alloys. 7th Pacific Rim International Conference on Advanced Materials and Processing, Cairns, Australia, 2 - 6 August 2010. Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.2531

Development of biomedical near beta titanium alloys

Yu, Zhen Tao, Wang, Gui, Ma, Xi Qun, Dargusch, Matthew S., Han, Jian Ye and Yu, Sen (2009). Development of biomedical near beta titanium alloys. 4th International Light Metals Technology Conference (LMT 2009), Gold Coast, Qld, Australia, 29 June - 1 July 2009. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.618-619.303

High pressure coolant application in milling titanium

Palanisamy, S., Townsend, D., Scherrer, M., Andrews, R. and Dargusch, M. S. (2009). High pressure coolant application in milling titanium. LMT 2009: 4th International Light Metals Technology Conference, Gold Coast, QLD, Australia, 29 June-1 July 2009. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.618-619.89

Laser welding of titanium and its alloys for medical applications: current knowledge and future direction

Alexander John Michael Buddery, Dargusch, Matthew S., St John, David H., Drennan, John and Nabulsi, S. (2009). Laser welding of titanium and its alloys for medical applications: current knowledge and future direction. 4th International Light Metals Technology Conference (LMT 2009), Gold Coast, QLD Australia, 29 June - 1 July 2009. Pfaffikon, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.618-619.291

Latest developments in understanding the grain refinement of cast titanium

Bermingham, Michael, McDonald, Stuart D., St John, David H. and Dargusch, Matthew S. (2009). Latest developments in understanding the grain refinement of cast titanium. 4th International Light Metals Technology Conference (LMT 2009), Gold Coast, Australia, 29 June - 1 July 2009. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.618-619.315

Measurements of heat lossest during solidification of light meals

Dargusch, M. S., Hamasaaid, A., Dour, G. and Yao, X. (2009). Measurements of heat lossest during solidification of light meals. 5th International Conference on Advanced Materials and Processing (ICAMP-5), Harbin, China, 3–6 September 2008. Singapore: World Scientific Publishing Co.. doi: 10.1142/S0217979209060051

Effect of laser beam on the chip formation in machining of titanium alloys

Sun, Shoujin, Brandt, Milan and Dargusch, Matthew (2008). Effect of laser beam on the chip formation in machining of titanium alloys. ICALEO 2008 - 27th International Congress on Applications of Lasers and Electro-Optics, , , October 20, 2008-October 23, 2008. Laser Institute of America. doi: 10.2351/1.5061279

Unintentional effects of Sr additions in Al-Si foundry alloys

McDonald, Stuart, Dargusch, Matthew, Song, Guangling and StJohn, David (2007). Unintentional effects of Sr additions in Al-Si foundry alloys.

A Model to Predict the Heat Transfer Coefficient at the Casting-Die Interface for the High Pressure Die Casting Process

Hamasaiid, A., Dargusch, M.S., Davidson, C., Loulou, T. and Dour, G. (2007). A Model to Predict the Heat Transfer Coefficient at the Casting-Die Interface for the High Pressure Die Casting Process. 10th ESAFORM Conference on Material Forming, Zaragoza, Spain, 18-20 April 2007. Melville, New York: American Institute of Physics. doi: 10.1063/1.2729679

Integrating process, material and business strategies to transform a small-medium aluminium products manufacturer

Dover, I., Baumann, H., StJohn, D. H. and Dargusch, M. S. (2007). Integrating process, material and business strategies to transform a small-medium aluminium products manufacturer. PRICM 6: 6th Pacific Rim International Conference on Advanced Materials and Processing, Jeju Island, Korea, 5-9 November 2007. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.561-565.345

Machining of titanium alloys with and without coolant

Palanisamy, S., Dargusch, M. S., McDonald, S. D., Dowey, S. J. and Doyle, E. D. (2007). Machining of titanium alloys with and without coolant. 16th International Federation for Heat Treatment and Surface Engineering Congress, , , October 30, 2007-November 2, 2007. International Federation for Heat Treatment and Surface Engineering, IFHTSE.

The influence of Process Parameters during Machining of Ti6A14V Alloy

Dargusch, M.S., McDonald, S.D., Palanisamy, S. and St John, D.H. (2007). The influence of Process Parameters during Machining of Ti6A14V Alloy. PRICM 6, Jeju Island, Korea, 5-9 November 2007. Switzerland: Trans Tech Publications.

The influence of process parameters during machining of Ti6Al4V alloy

Palanisamy, S., Dargusch, M. S., McDonald, S. D. and StJohn, D. H. (2007). The influence of process parameters during machining of Ti6Al4V alloy. PRICM 6: The Sixth Pacific Rim International Conference on Advanced materials and Processing, Cheju Island, South Korea, 5-9 November, 2007. Zurich, Switzerland: Trans Tech Publications INC.. doi: 10.4028/www.scientific.net/MSF.561-565.159

Unintentional Effects of Sr Additions in Al-Si Foundry Alloys

McDonald, S.D., Dargusch, M.S., Song, G. and St John, D.H. (2007). Unintentional Effects of Sr Additions in Al-Si Foundry Alloys. TMS Annual Meeting and Exhibition, Orlando, Florida, USA, 25 February to 1 March, 2007. United Stated: TMS (The Minerals, Metals and Materials Society).

Vibration and surface deformation during machining of Ti6Al4V alloys

Palanisamy, S., McDonald, S.D., Dargusch, M.S. and St John, D.H. (2007). Vibration and surface deformation during machining of Ti6Al4V alloys. Light Metals Technology Conference 2007, Canada, 24-26 September, 2007. Canada: Public Works and Government Services Canada.

Heat transfer at the casting/die interface in high pressure die casting - experimental results and contribution to modelling

Hamasaiid, A., Dour, G., Dargusch, M. S., Loulou, T., Davidson, C. and Savage, G. (2006). Heat transfer at the casting/die interface in high pressure die casting - experimental results and contribution to modelling. Eleventh International Conference on Modeling of Casting, Welding and Advanced Solidification Processes, Opio, France, 28 May - 2 June, 2006. USA: The Minerals, Metals & Materials Society (TMS).

High Pressure Die Cast Aluminum Telecommunications Components

Dargusch, M. S., Dinnis, C. M., Savage, G., Schauer, N. and Wang, G. (2005). High Pressure Die Cast Aluminum Telecommunications Components. Cast Expo'05, St Louis, Missouri, April 16-19 2005. Illinois: NADCA.

The CAST Industry Best Practice Program

Dargusch, M. S., Keay, S., Arthur, J. and St John, D. H. (2005). The CAST Industry Best Practice Program. 36th Australian Foundry Institute National Conference, Sydney, 23-26 October 2005. Sydney Australia: Molten engineering.

Development of a non intrusive heat transfer coefficient gauge and its application to high pressure die casting

Dour, G., Dargusch, M. S., Davidson, C. J., Nef, A. and St John, D. H. (2003). Development of a non intrusive heat transfer coefficient gauge and its application to high pressure die casting. Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Brisbane: CRC for Cast Metals Manufacturing (CAST).

Manufacture of telecommunications components using high pressure die casting - a case study

Dargusch, M. S., Wang, G., Schauer, N. and Christodoulou, P. (2003). Manufacture of telecommunications components using high pressure die casting - a case study. Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Brisbane: CRC for Cast Metals Manufacturing (CAST).

Porosity reduction in a high pressure die casting through the use of squeeze pins

Binney, M. N., Dargusch, M. S., Nave, M. and McKinney, P. (2003). Porosity reduction in a high pressure die casting through the use of squeeze pins. Die Casting in the Heartland, Indianapolis, USA, 15-18 September 2003. USA: North American Die Casting Association.

Squeeze pin implementation in a high pressue die casting

Binney, M. N., Dargusch, M. S., Nave, M.D. and McKinney, P. (2003). Squeeze pin implementation in a high pressue die casting. Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Brisbane: CRC for Cast Metals Manufacturing (CAST).

Elevated temperature deformation of die cast Mg alloy AZ91D

Dargusch, M., Hisa, M., Caceres, C. H. and Dunlop, G. L. (1997). Elevated temperature deformation of die cast Mg alloy AZ91D. 3rd International Magnesium Conference, Manchester, United Kingdom, 10-12 April 1996. London, United Kingdom: Institute of Materials.

ZnCu wire suture data

Yang, Nan, Dargusch, Matthew, Venezuela, Jeffrey, Lau, Cora and Allavena, Rachel (2022). ZnCu wire suture data. The University of Queensland. (Dataset) doi: 10.48610/017d985

Enhancing the corrodibility of biodegradable iron and zinc using poly(lactic) acid (PLA) coating

Wang, Anguo, Dargusch, Matthew and Venezuela, Jeffrey (2021). Enhancing the corrodibility of biodegradable iron and zinc using poly(lactic) acid (PLA) coating. The University of Queensland. (Dataset) doi: 10.48610/5716f87

Corrosion of BM in bile

Venezuela, Jeffrey and Dargusch, Matthew (2021). Corrosion of BM in bile. The University of Queensland. (Dataset) doi: 10.48610/1abe36d

Biodegradable Fe-35Mn-1Ag

Venezuela, Jeffrey, Dargusch, Matthew and Yang, Nan (2020). Biodegradable Fe-35Mn-1Ag. The University of Queensland. (Dataset) doi: 10.14264/cd36ebe

Raw and processed data from study of effects of Sr alloying on microstructure of a Mg-Al-RE alloy and on the corrosion performance

Shi, Zhiming, Dargusch, Matthew S., Zhu, Hanling, Atrens, Andrej and Song, Guang-ling (2018). Raw and processed data from study of effects of Sr alloying on microstructure of a Mg-Al-RE alloy and on the corrosion performance. The University of Queensland. (Dataset) doi: 10.14264/uql.2018.522