The University of Queensland

Material and Engineering

Wang, Gui (1999). Material and Engineering. Beijing, China: BUAA Press.

General manufacturing route for medical devices

Sun, Yu, Yu, Sen and Wang, Gui (2020). General manufacturing route for medical devices. Metallic biomaterials processing and medical device manufacturing. (pp. 97-135) edited by Cuie Wen. Duxford, United Kingdom: Woodhead Publishing/Elsevier. doi: 10.1016/b978-0-08-102965-7.00003-5

Treatment by external fields

Wang, Gui, Dargusch, Matthew, Easton, Mark and St John, David (2018). Treatment by external fields. Fundamentals of aluminium metallurgy. (pp. 279-332) edited by Roger N. Lumley. Duxford, United Kingdom: Elsevier. doi: 10.1016/b978-0-08-102063-0.00009-6

Microstructure and mechanical properties of cast Ti25Nb3Mo3Zr2Sn alloy

Wang, Gui, Kent, Damon, Paladugu, Mohanchand, Yu, Zhen Tao and Dargusch, Matthew S. (2010). Microstructure and mechanical properties of cast Ti25Nb3Mo3Zr2Sn alloy. Manufacturing Science and Engineering I: International Conference on Manufacturing Science and Engineering (ICMSE 2009)Procedings, Zhuhai, Peoples Republic of China, 26-28 December, 2009. (pp. 488-491) edited by Zhengyi Jiang and Chunliang Zhang. Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.97-101.488

A systematic review of artificial neural network techniques for analysis of foot plantar pressure

Wang, Chongguang, Evans, Kerrie, Hartley, Dean, Morrison, Scott, Veidt, Martin and Wang, Gui (2024). A systematic review of artificial neural network techniques for analysis of foot plantar pressure. Biocybernetics and Biomedical Engineering, 44 (1), 197-208. doi: 10.1016/j.bbe.2024.01.005

A review of the origin of equiaxed grains during solidification under mechanical stirring, vibration, electromagnetic, electric-current, and ultrasonic treatments

Balasubramani, Nagasivamuni, Venezuela, Jeffrey, StJohn, David, Wang, Gui and Dargusch, Matthew (2023). A review of the origin of equiaxed grains during solidification under mechanical stirring, vibration, electromagnetic, electric-current, and ultrasonic treatments. Journal of Materials Science and Technology, 144, 243-265. doi: 10.1016/j.jmst.2022.09.067

Evolutions of Electromagnetic Fields and Forced Flow Driven by the Pulse Length of a Pulsed Magnetic Field and Their Relevance to the Grain Refinement of a Solidified Al–Si Hypoeutectic Alloy

Zhang, Yunhu, Wang, Junjie, Zhang, Jianlei, Xu, Yanyi, Ye, Chunyang, St John, D. H., Song, Changjiang, Zheng, Hongxing and Wang, Gui (2023). Evolutions of Electromagnetic Fields and Forced Flow Driven by the Pulse Length of a Pulsed Magnetic Field and Their Relevance to the Grain Refinement of a Solidified Al–Si Hypoeutectic Alloy. Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science, 54 (6), 3180-3202. doi: 10.1007/s11663-023-02900-7

An overview and critical assessment of the mechanisms of microstructural refinement during ultrasonic solidification of metals

Balasubramani, Nagasivamuni, Venezuela, Jeffrey, Yang, Nan, Wang, Gui, StJohn, David and Dargusch, Matthew (2022). An overview and critical assessment of the mechanisms of microstructural refinement during ultrasonic solidification of metals. Ultrasonics Sonochemistry, 89 106151, 1-16. doi: 10.1016/j.ultsonch.2022.106151

In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devices

Dargusch, Matthew S., Balasubramani, Nagasivamuni, Yang, Nan, Johnston, Sean, Ali, Yahia, Wang, Gui, Venezuela, Jeffrey, Carluccio, Jiwon, Lau, Cora, Allavena, Rachel, Liang, Daniel, Mardon, Karine and Ye, Qingsong (2022). In vivo performance of a rare earth free Mg–Zn–Ca alloy manufactured using twin roll casting for potential applications in the cranial and maxillofacial fixation devices. Bioactive Materials, 12, 85-96. doi: 10.1016/j.bioactmat.2021.10.026

Enhanced bioactivity and interfacial bonding strength of Ti3Zr2Sn3Mo25Nb alloy through graded porosity and surface bioactivation

Yu, Sen, Yu, Zhe, Guo, Dagang, Zhu, Hui, Zhang, Minghua, Han, Jianye, Yu, Zhentao, Cao, Yemin and Wang, Gui (2022). Enhanced bioactivity and interfacial bonding strength of Ti3Zr2Sn3Mo25Nb alloy through graded porosity and surface bioactivation. Journal of Materials Science and Technology, 100, 137-149. doi: 10.1016/j.jmst.2021.06.008

Improvement on biocompatibility and corrosion resistance of a Ti3Zr2Sn3Mo25Nb alloy through surface nanocrystallization and micro-arc oxidation

Yu, Sen, Zeng, Depeng, Zhu, Hui, Zhang, Wei, Wang, Lan, Yu, Zhentao, Huo, Wangtu, Guo, Dagang, Zhang, Meili and Wang, Gui (2022). Improvement on biocompatibility and corrosion resistance of a Ti3Zr2Sn3Mo25Nb alloy through surface nanocrystallization and micro-arc oxidation. Journal of Materials Science, 57 (8), 5298-5314. doi: 10.1007/s10853-022-06977-4

Effect of Mg on dynamic recrystallization of Zn–Mg alloys during room-temperature compression

Liu, Shiyang, Zhan, Hongyi, Kent, Damon, Tan, Qiyang, Yin, Yu, Doan, Nghiem, Wang, Chang, Dargusch, Matthew and Wang, Gui (2022). Effect of Mg on dynamic recrystallization of Zn–Mg alloys during room-temperature compression. Materials Science and Engineering: A, 830 142243, 142243. doi: 10.1016/j.msea.2021.142243

Influence of strain rate and crystallographic orientation on dynamic recrystallization of pure Zn during room-temperature compression

Liu, Shiyang, Kent, Damon, Zhan, Hongyi, Doan, Nghiem, Wang, Chang, Yu, Sen, Dargusch, Matthew and Wang, Gui (2021). Influence of strain rate and crystallographic orientation on dynamic recrystallization of pure Zn during room-temperature compression. Journal of Materials Science and Technology, 86, 237-250. doi: 10.1016/j.jmst.2020.12.077

Investigating the grain refinement mechanisms of pulsed electric current, ultrasonic and melt stirring solidification of pure aluminium

Balasubramani, Nagasivamuni, Xu, Yanyi, Zhang, Yunhu, Zhai, Qijie, Wang, Gui, StJohn, David and Dargusch, Matthew (2021). Investigating the grain refinement mechanisms of pulsed electric current, ultrasonic and melt stirring solidification of pure aluminium. JOM, 73 (12), 3873-3882. doi: 10.1007/s11837-021-04904-7

Mechanisms of the origin of fine and non-dendritic grains at the sonotrode–liquid metal interface during ultrasonic solidification of metals

Balasubramani, Nagasivamuni, Wang, Gui, StJohn, David H. and Dargusch, Matthew S. (2021). Mechanisms of the origin of fine and non-dendritic grains at the sonotrode–liquid metal interface during ultrasonic solidification of metals. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 52 (6), 2676-2688. doi: 10.1007/s11661-021-06264-y

An in vitro evaluation of the hierarchical micro/nanoporous structure of a Ti3Zr2Sn3Mo25Nb alloy after surface dealloying

Wang, Lan, Zhou, Wenhao, Yu, Zhentao, Yu, Sen, Zhou, Lian, Cao, Yemin, Dargusch, Matthew and Wang, Gui (2021). An in vitro evaluation of the hierarchical micro/nanoporous structure of a Ti3Zr2Sn3Mo25Nb alloy after surface dealloying. ACS Applied Materials and Interfaces, 13 (13), 15017-15030. doi: 10.1021/acsami.1c02140

Current understanding of the origin of equiaxed grains in pure metals during ultrasonic solidification and a comparison of grain formation processes with low frequency vibration, pulsed magnetic and electric-current pulse techniques

Balasubramani, Nagasivamuni, Wang, Gui, StJohn, David H. and Dargusch, Matthew S. (2021). Current understanding of the origin of equiaxed grains in pure metals during ultrasonic solidification and a comparison of grain formation processes with low frequency vibration, pulsed magnetic and electric-current pulse techniques. Journal of Materials Science and Technology, 65, 38-53. doi: 10.1016/j.jmst.2020.04.080

Hot tear formation during the casting of Al–Zn binary alloys

Yang, Bing, Wu, Jianchun, Zeng, Yu, Liu, Jinyan, Yang, Nan, McGuckin, Damian, Chhor, Allen, StJohn, David, Dargusch, Matthew and Wang, Gui (2021). Hot tear formation during the casting of Al–Zn binary alloys. Advanced Engineering Materials, 26 (2) 2301471, 1-9. doi: 10.1002/adem.202301471

The characterisation and formation of novel microstructural features in a Ti−Nb−Zr−Mo−Sn alloy manufactured by Laser Engineered Net Shaping (LENS)

Zhu, Hanliang, Wang, Zhiyang, Muránsky, Ondrej, Davis, Joel, Yu, Sen, Kent, Damon, Wang, Gui and Dargusch, Matthew S. (2021). The characterisation and formation of novel microstructural features in a Ti−Nb−Zr−Mo−Sn alloy manufactured by Laser Engineered Net Shaping (LENS). Additive Manufacturing, 37 101705, 1-13. doi: 10.1016/j.addma.2020.101705

Enhancing antibacterial performance and biocompatibility of pure titanium by a two-step electrochemical surface coating

Yu, Sen, Guo, Dagang, Han, Jianye, Sun, Lijuan, Zhu, Hui, Yu, Zhentao, Dargusch, Matthew and Wang, Gui (2020). Enhancing antibacterial performance and biocompatibility of pure titanium by a two-step electrochemical surface coating. ACS Applied Materials and Interfaces, 12 (40), 44433-44446. doi: 10.1021/acsami.0c10032

A comparative study of the role of solute, potent particles and ultrasonic treatment during solidification of pure Mg, Mg–Zn and Mg–Zr alloys

Balasubramani, Nagasivamuni, Wang, Gui, Easton, Mark A., StJohn, David H. and Dargusch, Matthew S. (2020). A comparative study of the role of solute, potent particles and ultrasonic treatment during solidification of pure Mg, Mg–Zn and Mg–Zr alloys. Journal of Magnesium and Alloys, 9 (3), 829-839. doi: 10.1016/j.jma.2020.08.006

Dynamic recrystallization of pure zinc during high strain-rate compression at ambient temperature

Liu, Shiyang, Kent, Damon, Zhan, Hongyi, Doan, Nghiem, Dargusch, Matthew and Wang, Gui (2020). Dynamic recrystallization of pure zinc during high strain-rate compression at ambient temperature. Materials Science and Engineering A, 784 139325, 139325. doi: 10.1016/j.msea.2020.139325

Improved biodegradable magnesium alloys through advanced solidification processing

Dargusch, M.S., Balasubramani, N., Venezuela, J., Johnston, S., Wang, G., Lau, C., Bermingham, M., Kent, D. and StJohn, D.H. (2020). Improved biodegradable magnesium alloys through advanced solidification processing. Scripta Materialia, 177, 234-240. doi: 10.1016/j.scriptamat.2019.10.028

Understanding the refinement of grains in laser surface remelted Al–Cu alloys

Patel, M.N., Qiu, D., Wang, G., Gibson, M.A., Prasad, A., StJohn, D.H. and Easton, M.A. (2020). Understanding the refinement of grains in laser surface remelted Al–Cu alloys. Scripta Materialia, 178, 447-451. doi: 10.1016/j.scriptamat.2019.12.020

Grain refinement of hypoeutectic Al-7wt.%Si alloy induced by an Al–V–B master alloy

Zhang, Y.H., Ye, C.Y., Shen, Y.P., Chang, W., StJohn, D.H., Wang, G. and Zhai, Q.J. (2020). Grain refinement of hypoeutectic Al-7wt.%Si alloy induced by an Al–V–B master alloy. Journal of Alloys and Compounds, 812 152022, 152022. doi: 10.1016/j.jallcom.2019.152022

The poisoning effect of Al and Be on Mg—1 wt.% Zr alloy and the role of ultrasonic treatment on grain refinement

Balasubramani, Nagasivamuni, Wang, Gui, StJohn, David H. and Dargusch, Matthew S. (2019). The poisoning effect of Al and Be on Mg—1 wt.% Zr alloy and the role of ultrasonic treatment on grain refinement. Frontiers in Materials, 6 322. doi: 10.3389/fmats.2019.00322

The role of ultrasonically induced acoustic streaming in developing fine equiaxed grains during the solidification of an Al-2 Pct Cu alloy

Wang, Gui, Wang, Qiang, Balasubramani, Nagasivamuni, Qian, Ma, Eskin, Dmitry G., Dargusch, Matthew S. and Stjohn, David H. (2019). The role of ultrasonically induced acoustic streaming in developing fine equiaxed grains during the solidification of an Al-2 Pct Cu alloy. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 50A (11), 5253-5263. doi: 10.1007/s11661-019-05448-x

Comparison of the microstructure and biocorrosion properties of additively manufactured and conventionally fabricated near β Ti–25Nb–3Zr–3Mo–2Sn alloy

Dargusch, Matthew S., Wang, Gui, Kent, Damon, Bermingham, Michael, Venezuela, Jeffrey, Frith, Jessica E., Yu, Zhentao, Yu, Sen and Shi, Zhiming (2019). Comparison of the microstructure and biocorrosion properties of additively manufactured and conventionally fabricated near β Ti–25Nb–3Zr–3Mo–2Sn alloy. ACS Biomaterials Science and Engineering, 5 (11) acsbiomaterials.9b00596, 5844-5856. doi: 10.1021/acsbiomaterials.9b00596

Ultrasonic processing for structure refinement: an overview of mechanisms and application of the interdependence theory

Balasubramani, Nagasivamuni, StJohn, David, Dargusch, Matthew and Wang, Gui (2019). Ultrasonic processing for structure refinement: an overview of mechanisms and application of the interdependence theory. Materials, 12 (19) 3187, 3187. doi: 10.3390/ma12193187

Effect of ultrasonic treatment on the alloying and grain refinement efficiency of a Mg – Zr master alloy added to magnesium at hypo- and hyper-peritectic compositions

Nagasivamuni, B., Wang, Gui, St John, David H. and Dargusch, Matthew S. (2019). Effect of ultrasonic treatment on the alloying and grain refinement efficiency of a Mg – Zr master alloy added to magnesium at hypo- and hyper-peritectic compositions. Journal of Crystal Growth, 512, 20-32. doi: 10.1016/j.jcrysgro.2019.02.004

Effect of ultrasonic melt treatment on intermetallic phase formation in a manganese-modified Al-17Si-2Fe alloy

Todaro, C.J., Easton, M.A., Qiu, D., Wang, G., StJohn, D.H. and Qian, M. (2019). Effect of ultrasonic melt treatment on intermetallic phase formation in a manganese-modified Al-17Si-2Fe alloy. Journal of Materials Processing Technology, 271, 346-356. doi: 10.1016/j.jmatprotec.2019.04.008

Effects of deformation twinning on the mechanical properties of biodegradable Zn-Mg alloys

Liu, Shiyang, Kent, Damon, Doan, Nghiem, Dargusch, Matthew and Wang, Gui (2019). Effects of deformation twinning on the mechanical properties of biodegradable Zn-Mg alloys. Bioactive Materials, 4 (1), 8-16. doi: 10.1016/j.bioactmat.2018.11.001

Progressive damage and elastic-plastic behavior of CF/Al composites during transverse tensile process

Wang, Zhen-Jun, Tian, Liang, Cai, Chang-Chun, Yu, Huan, Xu, Zhi-Feng, Wang, Gui and Dargusch, Matthew S. (2019). Progressive damage and elastic-plastic behavior of CF/Al composites during transverse tensile process. Zhongguo Youse Jinshu Xuebao, 29 (3), 458-466. doi: 10.19476/j.ysxb.1004.0609.2019.03.04

Sustainable utilization of municipal solid waste incineration fly ash for ceramic bricks with eco-friendly biosafety

Deng, Y., Gong, B., Chao, Y., Dong, T., Yang, W., Hong, M., Shi, X., Wang, G., Jin, Y. and Chen, Z.-G. (2018). Sustainable utilization of municipal solid waste incineration fly ash for ceramic bricks with eco-friendly biosafety. Materials Today Sustainability, 1-2, 32-38. doi: 10.1016/j.mtsust.2018.11.002

Evolution of the as-cast grain microstructure of an ultrasonically treated Al–2Cu alloy

Wang, Gui, Croaker, Paul, Dargusch, Matthew, McGuckin, Damian and StJohn, David (2018). Evolution of the as-cast grain microstructure of an ultrasonically treated Al–2Cu alloy. Advanced Engineering Materials, 20 (11) 1800521, 1800521. doi: 10.1002/adem.201800521

Ultrasonic Processing of Aluminum–Magnesium Alloys

Mills, Kurt, Wang, Gui, St John, David and Dargusch, Matthew (2018). Ultrasonic Processing of Aluminum–Magnesium Alloys. Materials, 11 (10) 1994, 1994. doi: 10.3390/ma11101994

Heterogeneous nucleation of pure Al on MgO single crystal substrate accompanied by a MgAl2O4 buffer layer

Sun, Jie, Wang, Dingpu, Zhang, Yunhu, Sheng, Cheng, Dargusch, Matthew, Wang, Gui, St John, David and Zhai, Qijie (2018). Heterogeneous nucleation of pure Al on MgO single crystal substrate accompanied by a MgAl2O4 buffer layer. Journal of Alloys and Compounds, 753, 543-550. doi: 10.1016/j.jallcom.2018.04.263

Fine equiaxed dendritic structure of a medium carbon steel cast using pulsed magneto-oscillation melt treatment

Sun, Jie, Sheng, Cheng, Wang, Ding-Pu, Zhao, Jing, Zhang, Yun-Hu, Zhong, Hong-Gang, Wang, Gui and Zhai, Qi-jie (2018). Fine equiaxed dendritic structure of a medium carbon steel cast using pulsed magneto-oscillation melt treatment. Advances in Manufacturing, 6 (2), 189-194. doi: 10.1007/s40436-017-0206-5

The effect of ultrasonic treatment on the mechanisms of grain formation of as-cast high purity zinc

Nagasivamuni, B., Wang, Gui, StJohn, David H. and Dargusch, Matthew S. (2018). The effect of ultrasonic treatment on the mechanisms of grain formation of as-cast high purity zinc. Journal of Crystal Growth, 495, 20-28. doi: 10.1016/j.jcrysgro.2018.05.006

Relevance of electrical current distribution to the forced flow and grain refinement in solidified Al-Si hypoeutectic alloy

Zhang, Y. H., Xu, Y. Y., Ye, C. Y., Sheng, C., Sun, J., Wang, G., Miao, X. C., Song, C. J. and Zhai, Q. J. (2018). Relevance of electrical current distribution to the forced flow and grain refinement in solidified Al-Si hypoeutectic alloy. Scientific Reports, 8 (1) 3242, 1-11. doi: 10.1038/s41598-018-21709-y

Precipitation of string-shaped morphologies consisting of aligned α phase in a metastable β titanium alloy

Zhan, Hongyi, Ceguerra, Anna, Wang, Gui, Cairney, Julie and Dargusch, Matthew (2018). Precipitation of string-shaped morphologies consisting of aligned α phase in a metastable β titanium alloy. Scientific Reports, 8 (1) 2038, 2038. doi: 10.1038/s41598-018-20386-1

Preparation of 2.5D woven fabric C-f/Al composite and its tensile deformation behavior in warp/weft direction

Zhenjun, Wang, Jingtao, Dong, Wang, Gui, Huan, Yu, Zhifeng, Xu and Dargusch, Matthew S. (2017). Preparation of 2.5D woven fabric C-f/Al composite and its tensile deformation behavior in warp/weft direction. Rare Metal Materials and Engineering, 46 (12), 3744-3752.

The Effect of Ultrasonic Melt Treatment on Macro-Segregation and Peritectic Transformation in an Al-19Si-4Fe Alloy

Todaro, C. J., Easton, M. A., Qiu, D., Wang, G., St John, D. H. and Qian, M. (2017). The Effect of Ultrasonic Melt Treatment on Macro-Segregation and Peritectic Transformation in an Al-19Si-4Fe Alloy. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 48 (11), 5579-5590. doi: 10.1007/s11661-017-4325-1

Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium

Wang, G., Wang, Q., Easton, M. A., Dargusch, M. S., Qian, M., Eskin, D. G. and StJohn, D. H. (2017). Role of ultrasonic treatment, inoculation and solute in the grain refinement of commercial purity aluminium. Scientific Reports, 7 (1) 9729, 9729. doi: 10.1038/s41598-017-10354-6

Identifying the stages during ultrasonic processing that reduce the grain size of aluminum with added Al3Ti1B master alloy

Wang, Gui, Dargusch, Matthew S., Eskin, Dmitry G. and StJohn, David H. (2017). Identifying the stages during ultrasonic processing that reduce the grain size of aluminum with added Al3Ti1B master alloy. Advanced Engineering Materials, 19 (8) 1700264, 1700264. doi: 10.1002/adem.201700264

Unexpected dynamic recrystallization behavior of Ti-7Cu alloy in semi-solid state

Chen, Yongnan, Yuan, Zhanwei, Zhan, Haifei, Zhao, Yongqing, Song, Xuding, Wang, Gui and Gu, Yuantong (2017). Unexpected dynamic recrystallization behavior of Ti-7Cu alloy in semi-solid state. Journal of Alloys and Compounds, 712, 468-476. doi: 10.1016/j.jallcom.2017.04.091

Manufacturing of graded titanium scaffolds using a novel space holder technique

Chen, Yunhui , Kent, Damon , Bermingham, Michael , Dehghan-Manshadi, Ali , Wang, Gui , Wen, Cuie and Dargusch, Matthew (2017). Manufacturing of graded titanium scaffolds using a novel space holder technique. Bioactive Materials, 2 (4), 248-252. doi: 10.1016/j.bioactmat.2017.07.001

Modeling of the dynamic recrystallization behavior of Csf/AZ91D magnesium matrix composites during hot compression process

Wang, Zhenjun, Huang, Biao, Qi, Lehua, Wang, Gui and Dargusch, Matthew S. (2017). Modeling of the dynamic recrystallization behavior of Csf/AZ91D magnesium matrix composites during hot compression process. Journal of Alloys and Compounds, 708, 328-336. doi: 10.1016/j.jallcom.2017.03.010

Simulation of convective flow and thermal conditions during ultrasonic treatment of an Al-2Cu alloy

Wang, Gui, Croaker, Paul, Dargusch, Matthew, McGuckin, Damian and StJohn, David (2017). Simulation of convective flow and thermal conditions during ultrasonic treatment of an Al-2Cu alloy. Computational Materials Science, 134, 116-125. doi: 10.1016/j.commatsci.2017.03.041

The corrosion behaviours of plasma-sprayed Fe-based amorphous coatings

Jiang, Chaoping, Liu, Wangqiang, Wang, Gui, Chen, Yongnan, Xing, Yazhe, Zhang, Chunhua and Dargusch, Matthew (2017). The corrosion behaviours of plasma-sprayed Fe-based amorphous coatings. Surface Engineering, 34 (8), 1-6. doi: 10.1080/02670844.2017.1319647

Improvement of interfacial bonding between plasma-sprayed cast iron splat and aluminum substrate through preheating substrate

Xing, Ya-Zhe, Liu, Zhang, Wang, Gui, Li, Xing-Hang, Jiang, Chao-Ping, Chen, Yong-Nan, Zhang, Yong, Song, Xu-Ding and Dargusch, Matthew (2017). Improvement of interfacial bonding between plasma-sprayed cast iron splat and aluminum substrate through preheating substrate. Surface and Coatings Technology, 316, 190-198. doi: 10.1016/j.surfcoat.2017.03.032

Effects of spray parameters on the adhesion between plasma-sprayed cast iron splat and aluminium substrate

Xing, Ya-Zhe, Liu, Zhang, Wang, Gui, Li, Xing-Hang, Xing, Ya-Long, Jiang, Chao-Ping, Chen, Yong-Nan, Song, Xu-Ding and Dargusch, Matthew (2017). Effects of spray parameters on the adhesion between plasma-sprayed cast iron splat and aluminium substrate. Surface and Coatings Technology, 315, 1-8. doi: 10.1016/j.surfcoat.2017.02.019

Improvements in microstructure and wear resistance of plasma-sprayed Fe-based amorphous coating by laser-remelting

Jiang, Chaoping, Chen, Hong, Wang, Gui, Chen, Yongnan, Xing, Yazhe, Zhang, Chunhua and Dargusch, Matthew (2017). Improvements in microstructure and wear resistance of plasma-sprayed Fe-based amorphous coating by laser-remelting. Journal of Thermal Spray Technology, 26 (4), 778-786. doi: 10.1007/s11666-017-0546-5

Development in plasma surface diffusion techniques of Ti-6Al-4V alloy: a review

Xing, Ya-Zhe, Wang, Gui, Zhang, Yong, Chen, Yong-Nan and Dargusch, Matthew (2017). Development in plasma surface diffusion techniques of Ti-6Al-4V alloy: a review. International Journal of Advanced Manufacturing Technology, 92 (5-8), 1-12. doi: 10.1007/s00170-017-0302-5

Constitutive equation for the hot deformation behavior of Csf/AZ91D composites and its validity for numerical simulation

Wang, Zhenjun, Qi, Lehua, Wang, Gui, Li, Hejun and Dargusch, Matthew S. (2016). Constitutive equation for the hot deformation behavior of Csf/AZ91D composites and its validity for numerical simulation. Mechanics of Materials, 102, 90-96. doi: 10.1016/j.mechmat.2016.08.011

The dynamic response of a metastable β Ti-Nb alloy to high strain rates at room and elevated temperatures

Zhan, Hongyi, Wang, Gui, Kent, Damon and Dargusch, Matthew (2016). The dynamic response of a metastable β Ti-Nb alloy to high strain rates at room and elevated temperatures. Acta Materialia, 105, 104-113. doi: 10.1016/j.actamat.2015.11.056

Chip formation characteristics in the machining of titanium alloys: a review

Gao, Yanfeng, Wang, Gui and Liu, Binbin (2016). Chip formation characteristics in the machining of titanium alloys: a review. International Journal of Machining and Machinability of Materials, 18 (1-2), 155-184. doi: 10.1504/IJMMM.2016.075467

An investigation of the mechanical behaviour of fine tubes fabricated from a Ti-25Nb-3Mo-3Zr-2Sn alloy

Zhang, Yaowu, Kent, Damon, Wang, Gui, St John, David and Dargusch, Matthew (2015). An investigation of the mechanical behaviour of fine tubes fabricated from a Ti-25Nb-3Mo-3Zr-2Sn alloy. Materials and Design, 85, 256-265. doi: 10.1016/j.matdes.2015.06.127

Enhanced Heterogeneous Nucleation by Pulsed Magneto-Oscillation Treatment of Liquid Aluminum Containing Al3Ti1B Additions

Liang, Dong, Sun, Jie, Liu, Tianyu, Zhai, Qijie, Wang, Gui, StJohn, David H., Dong, Hongbiao and Zhong, Honggang (2015). Enhanced Heterogeneous Nucleation by Pulsed Magneto-Oscillation Treatment of Liquid Aluminum Containing Al3Ti1B Additions. Advanced Engineering Materials, 17 (10), 1465-1469. doi: 10.1002/adem.201400488

On the deformation mechanisms and strain rate sensitivity of a metastable β Ti-Nb alloy

Zhan, Hongyi, Zeng, Weidong, Wang, Gui, Kent, Damon and Dargusch, Matthew (2015). On the deformation mechanisms and strain rate sensitivity of a metastable β Ti-Nb alloy. Scripta Materialia, 107, 34-37. doi: 10.1016/j.scriptamat.2015.05.014

Cutting force, chip formation, and tool wear during the laser-assisted machining a near-alpha titanium alloy BTi-6431S

Gao, Yanfeng, Wang, Gui, Bermingham, Michael J. and Dargusch, Matthew S. (2015). Cutting force, chip formation, and tool wear during the laser-assisted machining a near-alpha titanium alloy BTi-6431S. International Journal of Advanced Manufacturing Technology, 79 (9-12), 1949-1960. doi: 10.1007/s00170-015-6917-5

Microstructure, elastic deformation behavior and mechanical properties of biomedical β-type titanium alloy thin-tube used for stents

Tian, Yuxing, Yu, Zhentao, Ong, Chun Yee Aaron, Kent, Damon and Wang, Gui (2015). Microstructure, elastic deformation behavior and mechanical properties of biomedical β-type titanium alloy thin-tube used for stents. Journal of the Mechanical Behavior of Biomedical Materials, 45, 132-141. doi: 10.1016/j.jmbbm.2015.02.001

Microstructural characteristics of adiabatic shear localization in a metastable beta titanium alloy deformed at high strain rate and elevated temperatures

Zhan, Hongyi, Zeng, Weidong, Wang, Gui, Kent, Damon and Dargusch, Matthew (2015). Microstructural characteristics of adiabatic shear localization in a metastable beta titanium alloy deformed at high strain rate and elevated temperatures. Materials Characterization, 102 7820, 103-113. doi: 10.1016/j.matchar.2015.02.017

Evolution of the microstructure and mechanical properties during fabrication of mini-tubes from a biomedical beta-titanium alloy

Zhang, Yaowu, Kent, Damon, Wang, Gui, St John, David and Dargusch, Matthew (2015). Evolution of the microstructure and mechanical properties during fabrication of mini-tubes from a biomedical beta-titanium alloy. Journal of the Mechanical Behavior of Biomedical Materials, 42, 207-218. doi: 10.1016/j.jmbbm.2014.11.013

Grain refinement of commercial pure al treated by Pulsed Magneto-Oscillation on the top surface of melt

Liang, Dong, Liang, Zhu-yuan, Sun, Jie, Zhai, Qi-jie, Gui, Wang and StJohn, David H. (2015). Grain refinement of commercial pure al treated by Pulsed Magneto-Oscillation on the top surface of melt. China Foundry, 12 (1) 1672-6421, 48-53.

The role of ultrasonic treatment in refining the as-cast grain structure during the solidification of an Al–2Cu alloy

Wang, Gui, Dargusch, M. S., Qian, M., Eskin, D. G. and St John, David H. (2014). The role of ultrasonic treatment in refining the as-cast grain structure during the solidification of an Al–2Cu alloy. Journal of Crystal Growth, 408 (1), 119-124. doi: 10.1016/j.jcrysgro.2014.09.018

Dry sliding wear behaviour of TiC/Fe composites fabricated by exothermic dispersion of Fe-Ti-C powders

Zhu, H., Hua, B., Huang, J., Li, J., Wang, G. and Xie, Z. (2014). Dry sliding wear behaviour of TiC/Fe composites fabricated by exothermic dispersion of Fe-Ti-C powders. Tribology - Materials, Surfaces and Interfaces, 8 (3), 165-171. doi: 10.1179/1751584X14Y.0000000073

Nucleation and grain formation of pure Al under Pulsed Magneto-Oscillation treatment

Liang, Dong, Liang, Zhuyuan, Zhai, Qijie, Wang, Gui and St John, David H. (2014). Nucleation and grain formation of pure Al under Pulsed Magneto-Oscillation treatment. Materials Letters, 130, 48-50. doi: 10.1016/j.matlet.2014.05.058

Constitutive modelling of the flow behaviour of a β titanium alloy at high strain rates and elevated temperatures using the Johnson-Cook and modified Zerilli-Armstrong models

Zhan, Hongyi, Wang, Gui, Kent, Damon and Dargusch, Matthew (2014). Constitutive modelling of the flow behaviour of a β titanium alloy at high strain rates and elevated temperatures using the Johnson-Cook and modified Zerilli-Armstrong models. Materials Science and Engineering A, 612, 71-79. doi: 10.1016/j.msea.2014.06.030

Surface nanocrystallization of Cu and Ta by sliding friction

Zhang, Y. S., Zhang, P. X., Niu, H. Z., Chen, C., Wang, G., Xiao, D. H., Chen, X. H., Yu, Z. T., Yuan, S. B. and Bai, X. F. (2014). Surface nanocrystallization of Cu and Ta by sliding friction. Materials Science and Engineering A, 607, 351-355. doi: 10.1016/j.msea.2014.03.089

The dynamic response of a β titanium alloy to high strain rates and elevated temperatures

Zhan, Hongyi, Kent, Damon, Wang, Gui and Dargusch, Matthew S. (2014). The dynamic response of a β titanium alloy to high strain rates and elevated temperatures. Materials Science and Engineering A, 607, 417-426. doi: 10.1016/j.msea.2014.04.028

Reaction mechanism and mechanical properties of an aluminum-based composite fabricated in-situ from Al-SiO2 system

Zhu, Heguo, Dong, Kang, Huang, Jiewen, Li, Jianliang, Wang, Gui and Xie, Zonghan (2014). Reaction mechanism and mechanical properties of an aluminum-based composite fabricated in-situ from Al-SiO2 system. Materials Chemistry and Physics, 145 (3), 334-341. doi: 10.1016/j.matchemphys.2014.02.020

SPH/FE modeling of cutting force and chip formation during thermally assisted machining of Ti6Al4V alloy

Xi, Yao, Bermingham, Michael, Wang, Gui and Dargusch, Matthew (2014). SPH/FE modeling of cutting force and chip formation during thermally assisted machining of Ti6Al4V alloy. Computational Materials Science, 84, 188-197. doi: 10.1016/j.commatsci.2013.12.018

A study on laser assisted machining of Ti10V2Fe3Al alloy with varying laser power

Rahman Rashid, R. A., Sun, S., Palanisamy, S., Wang, G. and Dargusch, M. S. (2014). A study on laser assisted machining of Ti10V2Fe3Al alloy with varying laser power. International Journal of Advanced Manufacturing Technology, 74 (1-4), 219-224. doi: 10.1007/s00170-014-5958-5

Mechanics and dynamics of helical milling operations

Liu, Changyi, Wang, Gui and Dargusch, Matthew S. (2014). Mechanics and dynamics of helical milling operations. Strojniski Vestnik/Journal of Mechanical Engineering, 60 (11), 716-724. doi: 10.5545/sv-jme.2013.1588

Numerical modeling of laser assisted machining of a beta titanium alloy

Xi, Yao, Zhan, Hongyi, Rahman Rashid, R. A., Wang, Gui, Sun, Shoujin and Dargusch, Matthew (2014). Numerical modeling of laser assisted machining of a beta titanium alloy. Computational Materials Science, 92, 149-156. doi: 10.1016/j.commatsci.2014.05.023

The cold-rolling behaviour of AZ31 tubes for fabrication of biodegradable stents

Zhang, Yaowu, Kent, Damon, Wang, Gui, StJohn, David and Dargusch, Matthew S. (2014). The cold-rolling behaviour of AZ31 tubes for fabrication of biodegradable stents. Journal of the Mechanical Behavior of Biomedical Materials, 39, 292-303. doi: 10.1016/j.jmbbm.2014.07.026

Texture evolution in TLM titanium alloy during uniaxial compression

Bai, X. F., Zhao, Y. Q., Zhang, Y. S., Zeng, W. D., Yu, S. and Wang ,G. (2013). Texture evolution in TLM titanium alloy during uniaxial compression. Materials Science and Engineering A, 588, 29-33. doi: 10.1016/j.msea.2013.08.077

Effects of phase stability and processing on the mechanical properties of Ti-Nb based β Ti alloys

Kent, Damon, Wang, Gui and Dargusch, Matthew (2013). Effects of phase stability and processing on the mechanical properties of Ti-Nb based β Ti alloys. Journal of the Mechanical Behavior of Biomedical Materials, 28, 15-25. doi: 10.1016/j.jmbbm.2013.07.007

Finite element modeling of cutting force and chip formation during thermally assisted machining of Ti6Al4V alloy

Xi, Yao, Bermingham, Michael, Wang, Gui and Dargusch, Matthew (2013). Finite element modeling of cutting force and chip formation during thermally assisted machining of Ti6Al4V alloy. Journal of Manufacturing Science and Engineering, 135 (6) 061014, 061014-1-061014-9. doi: 10.1115/1.4025740

Experimental investigation of laser assisted machining of AZ91 magnesium alloy

Rashid, Rizwan Abdul Rahman, Sun, Shoujin, Wang, Gui and Dargusch, Matthew Simon (2013). Experimental investigation of laser assisted machining of AZ91 magnesium alloy. International Journal of Precision Engineering and Manufacturing, 14 (7), 1263-1265. doi: 10.1007/s12541-013-0172-1

The response of the high strength Ti-10V-2Fe-3Al beta titanium alloy to laser assisted cutting

Rashid, R. A. Rahman, Bermingham, M. J., Sun, S., Wang, G. and Dargusch, M. S. (2013). The response of the high strength Ti-10V-2Fe-3Al beta titanium alloy to laser assisted cutting. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology, 37 (2), 461-472. doi: 10.1016/j.precisioneng.2012.12.002

An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy

Rashid, R. A. Rahman, Sun, S., Wang, G. and Dargusch, M. S. (2012). An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy. International Journal of Machine Tools and Manufacture, 63, 58-69. doi: 10.1016/j.ijmachtools.2012.06.004

Haemocompatibility of Ti-3Zr-2Sn-3Mo-25Nb biomedical alloy with surface heparinization using electrostatic self assembly technology

Yu, Sen, Yu, Zhen-tao, Han, Jian-ye, Wang, Gui, Niu, Jin-long and Dargusch, Matthew S. (2012). Haemocompatibility of Ti-3Zr-2Sn-3Mo-25Nb biomedical alloy with surface heparinization using electrostatic self assembly technology. Transactions of Nonferrous Metals Society of China, 22 (12), 3046-3052. doi: 10.1016/S1003-6326(11)61569-0

Modelling, simulation and experimental investigation of cutting forces during helical milling operations

Liu, Changyi, Wang, Gui and Dargusch, Matthew S. (2012). Modelling, simulation and experimental investigation of cutting forces during helical milling operations. International Journal of Advanced Manufacturing Technology, 63 (9-12), 839-850. doi: 10.1007/s00170-012-3951-4

The effect of laser power on the machinability of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy during laser assisted machining

Rashid, R. A. Rahman, Sun, S., Wang, G. and Dargusch, M. S. (2012). The effect of laser power on the machinability of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy during laser assisted machining. International Journal of Machine Tools & Manufacture, 63, 41-43. doi: 10.1016/j.ijmachtools.2012.07.006

Thermal stability of an ultrafine grain β-Ti alloy

Kent, D., Xiao, W. L., Wang, G., Yu, Z. and Dargusch, M. S. (2012). Thermal stability of an ultrafine grain β-Ti alloy. Materials Science and Engineering A, 556, 582-587. doi: 10.1016/j.msea.2012.07.030

Determination of the influence of processing parameters on the mechanical properties of the Ti-6Al-4V alloy using an artificial neural network

Sun, Yu, Zeng, Weidong, Han, Yuanfei, Ma, Xiong, Zhao, Yongqing, Guo, Ping, Wang, Gui and Dargusch, Matthew S. (2012). Determination of the influence of processing parameters on the mechanical properties of the Ti-6Al-4V alloy using an artificial neural network. Computational Materials Science, 60, 239-244. doi: 10.1016/j.commatsci.2012.03.047

Thermal analysis of precipitation reactions in a Ti-25Nb-3Mo-3Zr-2Sn alloy

Kent, Damon, Pas, Steven, Zhu, Suming, Wang, Gui and Dargusch, Matthew S. (2012). Thermal analysis of precipitation reactions in a Ti-25Nb-3Mo-3Zr-2Sn alloy. Applied Physics A: Materials Science and Processing, 107 (4), 835-841. doi: 10.1007/s00339-012-6778-9

Compressive deformation behavior of a near-beta titanium alloy

Song, Wei Qian, Sun, Shoujin, Zhu, Suming, Wang, Gui, Wang, James and Dargusch, Matthew S. (2012). Compressive deformation behavior of a near-beta titanium alloy. Materials and Design, 34, 739-745. doi: 10.1016/j.matdes.2011.06.049

Formation of thick nanocrystalline surface layer on copper during oscillating sliding

Zhang, Y. S., Li, W. L., Wang, G., Zhang, L. C., Yao, B. and Han, Z. (2012). Formation of thick nanocrystalline surface layer on copper during oscillating sliding. Materials Letters, 68, 432-434. doi: 10.1016/j.matlet.2011.11.026

Influence of ageing temperature and heating rate on the properties and microstructure of beta Ti alloy, Ti-6Cr-5Mo-5V-4Al

Kent, D., Wang, G., Wang, W. and Dargusch, M. S. (2012). Influence of ageing temperature and heating rate on the properties and microstructure of beta Ti alloy, Ti-6Cr-5Mo-5V-4Al. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing, 531, 98-106. doi: 10.1016/j.msea.2011.10.040

Machinability of a near beta titanium alloy

Rashid, R. A. Rahman, Sun, S., Wang, G. and Dargusch, M. S. (2011). Machinability of a near beta titanium alloy. Proceedings of the Institution of Mechanical Engineers Part B, 225 (12), 2151-2162. doi: 10.1177/2041297511406649

High strength bulk tantalum with novel gradient structure within a particle fabricated by spark plasma sintering

Zhanga, Y. S., Zhang, X. M., Wang, G., Bai, X. F., Tan, P., Li, Z. K. and Yu, Z. T. (2011). High strength bulk tantalum with novel gradient structure within a particle fabricated by spark plasma sintering. Materials Science and Engineering A, 528 (29-30), 8332-8336. doi: 10.1016/j.msea.2011.08.026

Modeling the correlation between microstructure and the properties of the Ti–6Al–4V alloy based on an artificial neural network

Sun, Yu, Zeng, Weidong, Han, Yuanfei, Zhao, Yongqing, Wang, Gui, Dargusch, Matthew S. and Guo, Ping (2011). Modeling the correlation between microstructure and the properties of the Ti–6Al–4V alloy based on an artificial neural network. Materials Science and Engineering A, 528 (29-30), 8757-8764. doi: 10.1016/j.msea.2011.08.059

Biocompatibility and osteoconduction of active porous calcium–phosphate films on a novel Ti–3Zr–2Sn–3Mo–25Nb biomedical alloy

Yu, Sen, Yu, Zhentao, Wang, Gui, Han, Jianye, Ma, Xiqun and Dargusch, Matthew S. (2011). Biocompatibility and osteoconduction of active porous calcium–phosphate films on a novel Ti–3Zr–2Sn–3Mo–25Nb biomedical alloy. Colloids and Surfaces B: Biointerfaces, 85 (2), 103-115. doi: 10.1016/j.colsurfb.2011.02.025

Strength enhancement of a biomedical titanium alloy through a modified accumulative roll bonding technique

Kent, Damon, Wang, Gui, Yu, Zhentao, Ma, Xiqun and Dargusch, Matthew (2011). Strength enhancement of a biomedical titanium alloy through a modified accumulative roll bonding technique. Journal of the Mechanical Behavior of Biomedical Materials, 4 (3), 405-416. doi: 10.1016/j.jmbbm.2010.11.013

Preparation and osteoinduction of active micro-arc oxidation films on Ti-3Zr-2Sn-3Mo-25Nb alloy

Yu, Sen, Yu, Zhen-tao, Wang, Gui, Han, Jian-ye, Ma, Xi-qun and Dargusch, Matthew S. (2011). Preparation and osteoinduction of active micro-arc oxidation films on Ti-3Zr-2Sn-3Mo-25Nb alloy. Transactions of Nonferrous Metals Society of China, 21 (3), 573-580. doi: 10.1016/S1003-6326(11)60753-X

Strengthening of cast Ti-25Nb-3Mo-3Zr-2Sn alloy through precipitation of α in two discrete crystallographic orientations

Paladugu, Mohanchand, Kent, Damon, Wang, Gui, Yu, Zhentao and Dargusch, Matthew S. (2010). Strengthening of cast Ti-25Nb-3Mo-3Zr-2Sn alloy through precipitation of α in two discrete crystallographic orientations. Materials Science and Engineering A, 527 (24-25), 6601-6606. doi: 10.1016/j.msea.2010.06.075

Corrigendum to "Pseudoelastic behaviour of a beta Ti–25Nb–3Zr–3Mo–2Sn alloy" [Mater. Sci. Eng. A 527 (2010) 2246–2252]

Kent, D., Wang, G., Yu, Z. and Dargusch, M. S. (2010). Corrigendum to "Pseudoelastic behaviour of a beta Ti–25Nb–3Zr–3Mo–2Sn alloy" [Mater. Sci. Eng. A 527 (2010) 2246–2252]. Materials Science and Engineering: A, 527 (16-17), 4524-4524. doi: 10.1016/j.msea.2010.03.060

Pseudoelastic behaviour of a beta Ti-25Nb-3Zr-3Mo-2Sn alloy

Kent, D., Wang, G., Yu, Z. and Dargusch, M. S. (2010). Pseudoelastic behaviour of a beta Ti-25Nb-3Zr-3Mo-2Sn alloy. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 527 (9), 2246-2252. doi: 10.1016/j.msea.2009.11.059

Histocompatibility and osteogenic activity of Ti5Zr6Mo15Nb alloy with surface modification by porous TiO2 /HA coating

Yu, Sen, Yu, Zhentao, Han, Jianye, Niu, Jinlong, Wang, Gui and Dargusch, Matthew S. (2010). Histocompatibility and osteogenic activity of Ti5Zr6Mo15Nb alloy with surface modification by porous TiO2 /HA coating. Jinshu Rechuli [Heat Treatment of Metals], 35 (9), 31-36.

Interfacial heat transfer during die casting of an Al-Si-Cu alloy

Hamasaiid, A., Wang, G., Davidson, C., Dour, G. and Dargusch, M. S. (2009). Interfacial heat transfer during die casting of an Al-Si-Cu alloy. Metallurgical and materials transactions. A, Physical metallurgy and materials science, 40 (13), 3056-3058. doi: 10.1007/s11661-009-0048-2

Elevated temperature mechanical properties and microstructures of high pressure die cast magnesium AZ91 alloy cast with different section thicknesses

Dargusch, M. S., Easton, M. A., Zhu, S. M. and Wang, G. (2009). Elevated temperature mechanical properties and microstructures of high pressure die cast magnesium AZ91 alloy cast with different section thicknesses. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 523 (1-2), 282-288. doi: 10.1016/j.msea.2009.06.015

Shape memory characteristics of a near beta titanium alloy

Yu, Z., Wang, G., Ma, X., Zhang, Y. and Dargusch, M. S. (2009). Shape memory characteristics of a near beta titanium alloy. Materials Science And Engineering A: Structural Materials Properties Microstructure and Processing, 513-514 (C), 233-238. doi: 10.1016/j.msea.2009.01.077

Evaluation of haemocompatibility of TLM titanium alloy with surface heparinization

Yu, S., Yu, Z. T., Wang, G., Dargusch, M. S. and Zhang, M. H. (2009). Evaluation of haemocompatibility of TLM titanium alloy with surface heparinization. Rare Metal Materials and Engineering, 38 (3), 384-388. doi: 10.1016/S1875-5372(10)60023-9

Surface bio-modification by TiO2 film on TLM biomedical titanium alloy

Sen, Yu, Zhentao, Yu, Jianye, Han, Xiqun, Ma, Wang, Gui and Dargusch, Matthew S. (2009). Surface bio-modification by TiO2 film on TLM biomedical titanium alloy. Heat treatment of Metals, 34 (3), 63-67.

Manufacture of high pressure die-cast radio frequency filter bodies

Dargusch, M. S., Wang, G., Schauer, N., Dinnis, C. M. and Savage, G. (2005). Manufacture of high pressure die-cast radio frequency filter bodies. International Journal Of Cast Metals Research, 18 (1), 47-53. doi: 10.1179/136404605225022784

Modeling for evaluating the process ability of casting structure

Wang, Gui, Yang, Li and Zhou, Tietao (2000). Modeling for evaluating the process ability of casting structure. Acta Aeronautica et Astronautica Sinica, 21 (3), 222-225.

Numerical simulation of temperature field for investment casting solidification process

Wang, Gui, Yang, Li and Zhou, Tietao (2000). Numerical simulation of temperature field for investment casting solidification process. Journal of Beijing University of Aeronautics & Astronautics, 26 (3), 249-251.

Concurrent engineering and development of net shape casting

Wang, Gui, Chen, Bing and et al. (1999). Concurrent engineering and development of net shape casting. Special Casting & Nonferrous Alloys (4), x-x.

Numerical simulation for high pressure die-casting process

Wang, Gui, Zai, Shoubin and et al. (1999). Numerical simulation for high pressure die-casting process. Foundry Technology (1)

Study on the vacuum suction casting process for Al alloy casting

Wang, Gui, Gu, Jin and et al. (1998). Study on the vacuum suction casting process for Al alloy casting. Special Casting & Nonferrous Alloys (4), x-x.

Application of rapid prototyping technology

Chen, Bing and Wang, Gui (1996). Application of rapid prototyping technology. Aviation Production Engineering (157)

Numerical simulation of the stainless investment castings

Wang, Gui, Chen, Bing and et al. (1996). Numerical simulation of the stainless investment castings. Special Casting & Nonferrous Alloys (4), x-x.

Study on indirect chills of heavy steel casting

Huang, Tianyou, Wang, Gui and et al. (1995). Study on indirect chills of heavy steel casting. Journal of Tsinghua University, 35 (S1)

Effect of magnesium on mechanical properties of binary Zn–Mg alloys

Liu, Shiyang, Doan, Nghiem and Wang, Gui (2020). Effect of magnesium on mechanical properties of binary Zn–Mg alloys. 7th International Conference on the Development of Biomedical Engineering in Vietnam (BME7), Ho Chi Minh City, Vietnam, 27-29 June 2018. Singapore: Springer Verlag. doi: 10.1007/978-981-13-5859-3_27

Cellular automation finite element modeling of the evolution of the as-cast microstructure of an ultrasonically treated al-2cu alloy

Wang, Gui, Croaker, Paul, Dargusch, Matthew, McGuckin, Damian and StJohn, David (2019). Cellular automation finite element modeling of the evolution of the as-cast microstructure of an ultrasonically treated al-2cu alloy. Light Metals Symposium held at the TMS Annual Meeting and Exhibition, 2019, San Antonio, TX, March 10, 2019-March 14, 2019. CHAM: Springer International Publishing. doi: 10.1007/978-3-030-05864-7_205

Mechanisms of grain formation during ultrasonic solidification of commercial purity magnesium

Nagasivamuni, B., Wang, Gui, St John, David H. and Dargusch, Matthew S. (2019). Mechanisms of grain formation during ultrasonic solidification of commercial purity magnesium. Light Metals Symposium, TMS Annual Meeting and Exhibition, San Antonio, TX, United States, 10-14 March 2019. Cham, Switzerland: Springer International. doi: 10.1007/978-3-030-05864-7_200

Material perspectives of the dental implants: A review

Wang, Gui, Dargusch, Matthew and Doan, Nghiem (2018). Material perspectives of the dental implants: A review. 6th International Conference on the Development of Biomedical Engineering in Vietnam, BME 2016, Ho Chi Minh, Vietnam, 27-29 June 2016. Singapore, Singapore: Springer Verlag. doi: 10.1007/978-981-10-4361-1_76

Effect of Ultrasonic Treatment on The As-Cast Grain Structure during The Solidification of An Al-2Cu Alloy

Wang, Gui, Dargusch, Matthew S. and St John, David H. (2016). Effect of Ultrasonic Treatment on The As-Cast Grain Structure during The Solidification of An Al-2Cu Alloy. The Ninth Pacific Rim International Conference on Advanced Materials and Processing, Kyoto, Japan, 1-5 August 2016.

Grain Refinement of an Al-2 wt%Cu Alloy by Al3Ti1B Master Alloy and Ultrasonic Treatment

Wang, E. Q., Wang, G., Dargusch, M. S., Qian, M., Eskin, D. G. and StJohn, D. H. (2016). Grain Refinement of an Al-2 wt%Cu Alloy by Al3Ti1B Master Alloy and Ultrasonic Treatment. 4th International Conference on Advances in Solidification Processes, ICASP 2014, Windsor, United Kingdom, 8 - 11 July 2014. Bristol, United Kingdom: Institute of Physics Publishing. doi: 10.1088/1757-899X/117/1/012050

Grain refinement of Al-Si hypoeutectic alloys by Al3Ti1B master alloy and ultrasonic treatment

Wang, Gui, Wang, Eric Qiang, Prasad, Arvind, Dargusch, Matthew and StJohn, David H. (2016). Grain refinement of Al-Si hypoeutectic alloys by Al3Ti1B master alloy and ultrasonic treatment. Shape Casting: 6th International Symposium, Nashville, Tennessee, United States, 14-18 February 2016. Hoboken, NJ, United States: John Wiley & Sons. doi: 10.1002/9781119274865.ch18

Experimental investigation of various chip parameters during machining of the Ti25nb3mo3zr2sn beta titanium alloy

Rashid, Raham Rashid Rahman, Sun, C., Wang, Gui and Dargusch, Matthew S. (2013). Experimental investigation of various chip parameters during machining of the Ti25nb3mo3zr2sn beta titanium alloy. Stafa-Zurich, 8712 Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.622-623.366

FEA modelling of cutting force and chip formation in thermally assisted machining of Ti6Al4V alloy

Xi, Yao, Bermingham, Michael, Wang, Gui and Dargusch, Matthew (2013). FEA modelling of cutting force and chip formation in thermally assisted machining of Ti6Al4V alloy. LMT 2013: 6th International Light Metals Technology Conference, Old Windsor, UK, 24-26 July, 2013. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.765.343

Corrosion resistance of copper infiltrated on 0Cr18Ni9 austenitic stainless steel by plasma surface technology

Tang, Yan, Zhang, Jingchun, Xu, Jinyong, Wang, Gui, Gao, Cheng and Mo, Weiheng (2012). Corrosion resistance of copper infiltrated on 0Cr18Ni9 austenitic stainless steel by plasma surface technology. AEMT 2012: 2nd International Conference on Advanced Engineering Materials and Technology, Zhuhai, China, 6-8 July, 2012. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.538-541.340

Development of ultrafine and nano-crystalline grain structures during modified accumulative roll bonding of titanium alloy, Ti-25Nb-3Zr-3Mo-2Sn

Kent, Damon, Wang, Gui, Yu, Zhentao, Ma, Xiqun and Dargusch, Matthew S. (2012). Development of ultrafine and nano-crystalline grain structures during modified accumulative roll bonding of titanium alloy, Ti-25Nb-3Zr-3Mo-2Sn. 12th World Conference on Titanium (Ti-2011 ), Beijing, China, 19-24 June 2011. Beijing, China: Science Press.

Effects of electric pulse on solidification process of Fe-C-S alloy treated with RE

Wang, Haichuan, Li, Xin, Liao, Zhiyou, Li, Ming, Qian, Zhangxiu, Li, Jie and Wang, Gui (2012). Effects of electric pulse on solidification process of Fe-C-S alloy treated with RE. ICCMME 2011: International Conference on Chemical, Material and Metallurgical Engineering, Beihai, China, 23-25 December, 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.399-401.189

Microstructure and mechanical properties of biomedical near-β Ti alloy TLM with nanostructure by ARB process

Yu, Z., Ma, X., Wang, G., Yu, S., Sun, Q. and Damon, K. (2012). Microstructure and mechanical properties of biomedical near-β Ti alloy TLM with nanostructure by ARB process. 12th World Conference on Titanium, Ti 2011, Beijing, China, 19-24 June 2011. Beijing, China: Science Press.

Review of recent titanium research in Australia

Palanisamy, S., Dargusch, M. S., Sun, S., Bermingham, M. J., Wen, C. E., Wang, G., Xia, K. and StJohn, D. H. (2012). Review of recent titanium research in Australia. 12th World Conference on Titanium, Ti 2011, Beijing, China, 19-24 June 2011. Beijing, China: Science Press.

Effect of pulsed current on the microstructure and distribution of C and Mn in an Fe-0.5C-1.5Mn alloy

Wang, Hai Chuan, Hong, Peng, Liao, Zhiyou, Li, Xin, Li, Jie, Wang, Gui, Wang, Shijun and Dargusch, Matthew S. (2011). Effect of pulsed current on the microstructure and distribution of C and Mn in an Fe-0.5C-1.5Mn alloy. 2010 International Conference on Advances in Materials and Manufacturing Processes (ICAMMP 2010), Shenzhen, China, 6-8 November 2010. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.146-147.1612

Effect of pulsed electric field on the distribution and migration of P, S, and Si elements of Fe-based alloys

Liao, Zhiyou, Wang, Haichuan, Hong, Ping, Li, Xin, Li, Ji, Wang, Shijun, Wang, Gui and Dargusch, Matthew S. (2011). Effect of pulsed electric field on the distribution and migration of P, S, and Si elements of Fe-based alloys. 2nd International Conference on Manufacturing Science and Engineering, Guilin, China, 9-11 April 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.194-196.371

Effect of static magnetic field on distribution of elements in the Fe-S, Fe-Si, and Fe-Mn alloys

Wang, Haichuan, Liao, Zhiyou, Pang, Ruipeng, Hong, Peng, Wang, Shijun, Li, Jie, Wang, Gui and Dargusch, Matthew S. (2011). Effect of static magnetic field on distribution of elements in the Fe-S, Fe-Si, and Fe-Mn alloys. 2nd International Conference on Manufacturing Science and Engineering (ICMSE 2011), Guilin, China, 9-11 April 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.194-196.367

Effect of ultrasonic power on the microstructure and hardness of commercially pure aluminum

Wang, Haichuan, Liu, Dan, Liao, Zhiyou, Li, Ming, Jie, Li, Wang, Gui and Dargusch, Matthew S. (2011). Effect of ultrasonic power on the microstructure and hardness of commercially pure aluminum. 2nd International Conference on Manufacturing Science and Engineering, Guilin, China, 9-11 April 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/AMR.194-196.1192

The aging response of a metastable β Ti alloy, BTi-6554

Wang, Yongqiang, Wang, Gui, Wang, Weiqi, Kent, Damon and Dargusch, Matthew S. (2011). The aging response of a metastable β Ti alloy, BTi-6554. The 5th International Light Metals Technology Conference (LMT 2011), Lüneburg, Germany, 19–22 July 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.690.29

The effect of HIPping on the microstructure and tensile properties of cast BTi-6554 alloy

Wang, Yongmei, Wang, Gui, Wang, Weiqi, Kent, Damon and Dargusch, Matthew S. (2011). The effect of HIPping on the microstructure and tensile properties of cast BTi-6554 alloy. The 5th International Light Metals Technology Conference (LMT 2011), Lüneburg, Germany, 19–22 July 2011. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.690.33

Influence of heat treatment on the pseudoelastic behaviour of a beta Ti-25Nb-3Zr-3Mo-2Sn alloy

Kent, Damon, Wang,Gui, Zheng, Li Hui, Yu, Zhen Tao and Dargusch, Matthew S. (2010). Influence of heat treatment on the pseudoelastic behaviour of a beta Ti-25Nb-3Zr-3Mo-2Sn alloy. 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 7), Cairns, QLD, Australia, 2-6 August 2010. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.871

Microstructure characterization of laser welded near-beta titanium alloy 'TLM' under different process conditions

Buddery, A, Wang, G, Yu, ZT, Dargusch, M and Nabulsi, S (2010). Microstructure characterization of laser welded near-beta titanium alloy 'TLM' under different process conditions. 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 7), Cairns, Qld., Australia, 2-6 August 2010. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.2146

The effect of temperature on the microstructure of a metastable beta titanium alloy

Wang, Gui, Wang, Weiqi, Yang, Yulan, Kent, Damon and Dargusch, Matthew S. (2010). The effect of temperature on the microstructure of a metastable beta titanium alloy. Pacific Rim International Conference on Advanced Materials and Processing, Cairns, QLD, Australia, 2-6 August 2010. Stafa-Zurich ; United Kingdom: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.654-656.847

Development of biomedical near beta titanium alloys

Yu, Zhen Tao, Wang, Gui, Ma, Xi Qun, Dargusch, Matthew S., Han, Jian Ye and Yu, Sen (2009). Development of biomedical near beta titanium alloys. 4th International Light Metals Technology Conference (LMT 2009), Gold Coast, Qld, Australia, 29 June - 1 July 2009. Stafa-Zurich, Switzerland: Trans Tech Publications. doi: 10.4028/www.scientific.net/MSF.618-619.303

Process, microstructure and mechanical properties of the novel near type biomedical Ti alloy

Yu, Zhentao, Yuan, Sibo, Qiang, Huangfu, Yafeng, Zhang,, Wang, Gui, Yu, Sen and Jianye, Han (2008). Process, microstructure and mechanical properties of the novel near type biomedical Ti alloy. 2008 MRS International Materials Research Conference, Symposium I: Biomaterials for Medical Applications, Chongqing, China, 9-12 June, 2008.

High Pressure Die Cast Aluminum Telecommunications Components

Dargusch, M. S., Dinnis, C. M., Savage, G., Schauer, N. and Wang, G. (2005). High Pressure Die Cast Aluminum Telecommunications Components. Cast Expo'05, St Louis, Missouri, April 16-19 2005. Illinois: NADCA.

Manufacture of telecommunications components using high pressure die casting - a case study

Dargusch, M. S., Wang, G., Schauer, N. and Christodoulou, P. (2003). Manufacture of telecommunications components using high pressure die casting - a case study. Light Metals Technology Conference 2003, Brisbane, Australia, 18-20 September 2003. Brisbane: CRC for Cast Metals Manufacturing (CAST).

Foundry production and concurrent engineering

Wang, Gui, Yang, Li and et al. (1999). Foundry production and concurrent engineering. Investment Casting Annual Meeting of China, China, 1999.

Study on developing complicated casting in the concurrent engineering environment

Wang, Gui and Shoubin, Zai (1998). Study on developing complicated casting in the concurrent engineering environment. Joint Young Scientists Conference on Manufacturing Science and The 3rd S. M. Wu Symposium on Manufacturing Science, China, June, 1998.

ProCAST-casting process simulation software application on the casting processing design

Wang, Gui and Ren, Jingsong (1996). ProCAST-casting process simulation software application on the casting processing design. Foundry Technology Annual Meeting, x, 1996.

Temperature measure and numerical simulation of Al alloy investment net shape casting

Wang, Gui, He, Fuying and et al (1996). Temperature measure and numerical simulation of Al alloy investment net shape casting. Foundry Technology Annual Meeting, x, 1996.

A foundry molding sand expert system based on artificial neural network

Huang, Tianyou, Wang, Gui and et al. (1995). A foundry molding sand expert system based on artificial neural network. Foundry 1995, x, May, 1995.

Application of artificial neural networks in foundry industry

Wang, Gui, Huang, Tianyou and et al. (1995). Application of artificial neural networks in foundry industry. Foundry Technology Annual Meeting 1995, x, 1995.

Technology and application of numerical simulation of casting process

Wang, Gui and Chen, Bing (1995). Technology and application of numerical simulation of casting process. Investment casting Annual Meeting, China, 1995.