The University of Queensland

Influence of weathering on the structural performance of sheathing-to-timber connections

Cowled, Craig J. L., Slattery, Tom P., Crews, Keith and Brooke, Harrison (2023). Influence of weathering on the structural performance of sheathing-to-timber connections. Forests, 14 (4) 734, 734. doi: 10.3390/f14040734

Review of vibration assessment methods for steel-timber composite floors

Cheraghi-Shirazi, Najmeh, Crews, Keith and Malek, Sardar (2022). Review of vibration assessment methods for steel-timber composite floors. Buildings, 12 (12) 2061, 1-26. doi: 10.3390/buildings12122061

Half hole and full hole dowel embedment Strength: A review of international developments and recommendations for Australian softwoods

Ottenhaus, Lisa-Mareike, Li, Zancong and Crews, Keith (2022). Half hole and full hole dowel embedment Strength: A review of international developments and recommendations for Australian softwoods. Construction and Building Materials, 344 128130, 1-16. doi: 10.1016/j.conbuildmat.2022.128130

Designing timber connections for ductility – a review and discussion

Ottenhaus, Lisa-Mareike, Jockwer, Robert, van Drimmelen, David and Crews, Keith (2021). Designing timber connections for ductility – a review and discussion. Construction and Building Materials, 304 124621. doi: 10.1016/j.conbuildmat.2021.124621

Influence of loading protocol on the structural performance of timber-framed shear walls

Cowled, Craig J.L., Crews, Keith and Gover, Dave (2021). Influence of loading protocol on the structural performance of timber-framed shear walls. Construction and Building Materials, 288 123103, 123103. doi: 10.1016/j.conbuildmat.2021.123103

Response prediction to walking-induced vibrations of a long-span timber floor

Basaglia, Bella M., Li, Jianchun, Shrestha, Rijun and Crews, Keith (2021). Response prediction to walking-induced vibrations of a long-span timber floor. Journal of Structural Engineering (United States), 147 (2) 0002887. doi: 10.1061/(ASCE)ST.1943-541X.0002888

Experimental and analytical investigation on CFRP strengthened glulam laminated timber beams: Full-scale experiments

Vahedian, Abbas, Shrestha, Rijun and Crews, Keith (2019). Experimental and analytical investigation on CFRP strengthened glulam laminated timber beams: Full-scale experiments. Composites Part B: Engineering, 164, 377-389. doi: 10.1016/j.compositesb.2018.12.007

Bond strength model for externally bonded FRP-to-timber interface

Vahedian, Abbas, Shrestha, Rijun and Crews, Keith (2018). Bond strength model for externally bonded FRP-to-timber interface. Composite Structures, 200, 328-339. doi: 10.1016/j.compstruct.2018.05.152

Analysis of externally bonded Carbon Fibre Reinforced Polymers sheet to timber interface

Vahedian, Abbas, Shrestha, Rijun and Crews, Keith (2018). Analysis of externally bonded Carbon Fibre Reinforced Polymers sheet to timber interface. Composite Structures, 191, 239-250. doi: 10.1016/j.compstruct.2018.02.064

Effective bond length and bond behaviour of FRP externally bonded to timber

Vahedian, Abbas, Shrestha, Rijun and Crews, Keith (2017). Effective bond length and bond behaviour of FRP externally bonded to timber. Construction and Building Materials, 151, 742-754. doi: 10.1016/j.conbuildmat.2017.06.149

Experimental investigations of deconstructable timber-concrete composite beams

Khorsandnia, Nima, Valipour, Hamid, Schänzlin, Jörg and Crews, Keith (2016). Experimental investigations of deconstructable timber-concrete composite beams. Journal of Structural Engineering, 142 (12) 04016130. doi: 10.1061/(ASCE)ST.1943-541X.0001607

Experimental and analytical study on dynamic performance of timber floor modules (timber beams)

Rijal, Rajendra, Samali, Bijan, Shrestha, Rijun and Crews, Keith (2016). Experimental and analytical study on dynamic performance of timber floor modules (timber beams). Construction and Building Materials, 122, 391-399. doi: 10.1016/j.conbuildmat.2016.06.027

Timber-concrete-composites increasing the use of timber in construction

Dias, A., Skinner, J., Crews, K. and Tannert, T. (2016). Timber-concrete-composites increasing the use of timber in construction. European Journal of Wood and Wood Products, 74 (3), 443-451. doi: 10.1007/s00107-015-0975-0

Numerical modelling of timber/timber-concrete composite frames with ductile jointed connection

Valipour, Hamid, Khorsandnia, Nima, Crews, Keith and Palermo, Alessandro (2016). Numerical modelling of timber/timber-concrete composite frames with ductile jointed connection. Advances in Structural Engineering, 19 (2), 299-313. doi: 10.1177/1369433215624600

A comparative study of using static and ultrasonic material testing methods to determine the anisotropic material properties of wood

Dackermann, Ulrike, Elsener, Roman, Li, Jianchun and Crews, Keith (2016). A comparative study of using static and ultrasonic material testing methods to determine the anisotropic material properties of wood. Construction and Building Materials, 102, 963-976. doi: 10.1016/j.conbuildmat.2015.07.195

A dynamic-based method for the assessment of connection systems of timber composite structures

Dackermann, Ulrike, Li, Jianchun, Rijal, Rajendra and Crews, Keith (2016). A dynamic-based method for the assessment of connection systems of timber composite structures. Construction and Building Materials, 102, 999-1008. doi: 10.1016/j.conbuildmat.2015.10.009

Reducing the effect of wave dispersion in a timber pole based on transversely isotropic material modelling

Subhani, Mahbube, Li, Jianchun, Samali, Bijan and Crews, Keith (2016). Reducing the effect of wave dispersion in a timber pole based on transversely isotropic material modelling. Construction and Building Materials, 102, 985-998. doi: 10.1016/j.conbuildmat.2015.10.010

Special issue: Reinforcement of timber structures

Harte, Annette M. and Crews, Keith (2015). Special issue: Reinforcement of timber structures. Construction and Building Materials, 97. doi: 10.1016/j.conbuildmat.2015.08.144

Coupled finite element-finite difference formulation for long-term analysis of timber-concrete composite structures

Khorsandnia, Nima, Schänzlin, Jörg, Valipour, Hamid and Crews, Keith (2015). Coupled finite element-finite difference formulation for long-term analysis of timber-concrete composite structures. Engineering Structures, 96, 139-152. doi: 10.1016/j.engstruct.2015.03.047

Experimental and analytical study on dynamic performance of timber-concrete composite beams

Rijal, Rajendra, Samali, Bijan, Shrestha, Rijun and Crews, Keith (2015). Experimental and analytical study on dynamic performance of timber-concrete composite beams. Construction and Building Materials, 75, 46-53. doi: 10.1016/j.conbuildmat.2014.10.020

Application of Quasi-Brittle material model for analysis of timber members

Khorsandnia, Nima and Crews, K. (2015). Application of Quasi-Brittle material model for analysis of timber members. Australian Journal of Structural Engineering, 16 (2), 99-115. doi: 10.7158/S14-010.2015.16.2

Structural response of timber-concrete composite beams predicted by finite element models and manual calculations

Khorsandnia, Nima, Valipour, Hamid and Crews, Keith (2014). Structural response of timber-concrete composite beams predicted by finite element models and manual calculations. Advances in Structural Engineering, 17 (11), 1601-1621. doi: 10.1260/1369-4332.17.11.1601

Time-dependent behaviour of timber-concrete composite members: Numerical verification, sensitivity and influence of material properties

Khorsandnia, Nima, Schänzlin, Jörg, Valipour, Hamid and Crews, Keith (2014). Time-dependent behaviour of timber-concrete composite members: Numerical verification, sensitivity and influence of material properties. Construction and Building Materials, 66, 192-208. doi: 10.1016/j.conbuildmat.2014.05.079

Treatment of locking behaviour for displacement-based finite element analysis of composite beams

Erkmen, R. Emre, Bradford, Mark A. and Crews, Keith (2014). Treatment of locking behaviour for displacement-based finite element analysis of composite beams. Structural Engineering and Mechanics, 51 (1), 163-180. doi: 10.12989/sem.2014.51.1.163

A simple strategy for constitutive modelling of timber

Valipour, Hamid, Khorsandnia, Nima, Crews, Keith and Foster, S. (2014). A simple strategy for constitutive modelling of timber. Construction and Building Materials, 53, 138-148. doi: 10.1016/j.conbuildmat.2013.11.100

A force-based frame finite element formulation for analysis of two- and three-layered composite beams with material non-linearity

Khorsandnia, Nima, Valipour, Hamid, Foster, Stephen and Crews, Keith (2014). A force-based frame finite element formulation for analysis of two- and three-layered composite beams with material non-linearity. International Journal of Non-Linear Mechanics, 62, 12-22. doi: 10.1016/j.ijnonlinmec.2014.02.001

In situ assessment of structural timber using stress-wave measurements

Dackermann, Ulrike, Crews, Keith, Kasal, Bohumil, Li, Jianchun, Riggio, Mariapaola, Rinn, Frank and Tannert, Thomas (2014). In situ assessment of structural timber using stress-wave measurements. Materials and Structures/Materiaux et Constructions, 47 (5), 787-803. doi: 10.1617/s11527-013-0095-4

Sustainable timber use in residential construction: Perception versus reality

Thomas, D., Ding, G. and Crews, K. (2014). Sustainable timber use in residential construction: Perception versus reality. WIT Transactions on Ecology and the Environment, 186, 399-410. doi: 10.2495/ESUS140341

The Predictive Model for Stiffness of Inclined Screws as Shear Connection in Timber-Concrete Composite Floor

Moshiri, F., Shrestha, R. and Crews, K. (2014). The Predictive Model for Stiffness of Inclined Screws as Shear Connection in Timber-Concrete Composite Floor. RILEM Bookseries, 9, 443-453. doi: 10.1007/978-94-007-7811-5_40

Sustainable timber use in the Australian housing market: Are consumers willing to pay the price

Thomas, Douglas, Ding, Grace and Crews, Keith (2013). Sustainable timber use in the Australian housing market: Are consumers willing to pay the price. International Journal for Housing Science and Its Applications, 37 (3), 187-196.

Analytical cracking load estimation of Laminated Veneer Lumber (LVL) beams with holes

Ardalany, Manoochehr, Fragiacomo, Massimo, Deam, Bruce and Crews, Keith (2013). Analytical cracking load estimation of Laminated Veneer Lumber (LVL) beams with holes. European Journal of Wood and Wood Products, 71 (1), 37-48. doi: 10.1007/s00107-012-0646-3

Nonlinear finite element analysis of timber beams and joints using the layered approach and hypoelastic constitutive law

Khorsandnia, Nima, Valipour, Hamid R. and Crews, Keith (2013). Nonlinear finite element analysis of timber beams and joints using the layered approach and hypoelastic constitutive law. Engineering Structures, 46, 606-614. doi: 10.1016/j.engstruct.2012.08.017

Experimental and analytical investigation of short-term behaviour of LVL-concrete composite connections and beams

Khorsandnia, Nima, Valipour, Hamid R. and Crews, Keith (2012). Experimental and analytical investigation of short-term behaviour of LVL-concrete composite connections and beams. Construction and Building Materials, 37, 229-238. doi: 10.1016/j.conbuildmat.2012.07.022

Sustainable timber use in the australian housing market: Are consumers willing to pay the price?

Thomas, Douglas, Ding, Grace and Crews, Keith (2012). Sustainable timber use in the australian housing market: Are consumers willing to pay the price?. International Journal for Housing Science and Its Applications, 36 (4), 221-230.

Variational multiscale approach to enforce perfect bond in multiple-point constraint applications when forming composite beams

Erkmen, R. Emre, Bradford, Mark A. and Crews, Keith (2012). Variational multiscale approach to enforce perfect bond in multiple-point constraint applications when forming composite beams. Computational Mechanics, 49 (5), 617-628. doi: 10.1007/s00466-011-0667-5

Efficient finite element modelling of timber beams strengthened with bonded fibre reinforced polymers

Valipour, Hamid R. and Crews, Keith (2011). Efficient finite element modelling of timber beams strengthened with bonded fibre reinforced polymers. Construction and Building Materials, 25 (8), 3291-3300. doi: 10.1016/j.conbuildmat.2011.03.017

Application of the damage index method for plate-like structures to timber bridges

Samali, B., Li, J., Choi, F. C. and Crews, K. (2010). Application of the damage index method for plate-like structures to timber bridges. Structural Control and Health Monitoring, 17 (8), 849-871. doi: 10.1002/stc.347

Australian Journal of Structural Engineering: Preface

Crews, Keith (2009). Australian Journal of Structural Engineering: Preface. Australian Journal of Structural Engineering, 9 (3).

Timber stressed-skin panels: Design guidelines for Australian practice

Gerber, C. and Crews, K. (2009). Timber stressed-skin panels: Design guidelines for Australian practice. Australian Journal of Structural Engineering, 9 (3), 207-216. doi: 10.1080/13287982.2009.11465023

Application of the modified damage index method to timber beams

Choi, F. C., Li, J., Samali, B. and Crews, K. (2008). Application of the modified damage index method to timber beams. Engineering Structures, 30 (4), 1124-1145. doi: 10.1016/j.engstruct.2007.07.014

Load rating of impaired bridges using a dynamic method

Samali, B., Li, J., Crews, K. I. and Al-dawod, M. (2007). Load rating of impaired bridges using a dynamic method. Electronic Journal of Structural Engineering, 7, 66-75.

Application of modal-based damage-detection method to locate and evaluate damage in timber beams

Choi, Fook Choon, Li, Jianchun, Samali, Bijan and Crews, Keith (2007). Application of modal-based damage-detection method to locate and evaluate damage in timber beams. Journal of Wood Science, 53 (5), 394-400. doi: 10.1007/s10086-006-0881-5

Damage localisation and severity evaluation of a beam-like timber structure based on modal strain energy and flexibility approaches

Li, Jianchun, Choi, F. C., Samali, Bijan and Crews, Keith (2007). Damage localisation and severity evaluation of a beam-like timber structure based on modal strain energy and flexibility approaches. Journal of Building Appraisal, 2 (4), 323-334. doi: 10.1057/palgrave.jba.2950059

Design review of wood stressed-skin panels: The tributary width

Gerber, Christophe, Crews, Keith and Sigrist, Christophe (2006). Design review of wood stressed-skin panels: The tributary width. Real Structures: Bridges and Tall Buildings - Proceedings of the 10th East Asia-Pacific Conference on Structural Engineering and Construction, EASEC 2010, 4, 99-104.

A comparative study of design standards for assessment of long-span steel-timber composite floors under human-induced vibration

Malek, Sardar, Cheraghi-Shirazi, Najmeh, Crews, Keith, Parr, Roger, Creagh, Ariel and Khoshkbar, Parham (2023). A comparative study of design standards for assessment of long-span steel-timber composite floors under human-induced vibration. 13th World Conference on Timber Engineering, WCTE 2023, Oslo, Norway, 19-22 June 2023. World Conference on Timber Engineering (WCTE). doi: 10.52202/069179-0256

Influence of plasterboard on the structural performance of timber-framed shear walls

Cowled, Craig J.L., Slattery, Tom P., Crews, Keith and Brooke, Harrison (2023). Influence of plasterboard on the structural performance of timber-framed shear walls. 13th World Conference on Timber Engineering, WCTE 2023, Oslo, Norway, 19-22 June 2023. As, Norway: World Conference on Timber Engineering (WCTE). doi: 10.52202/069179-0445

How the choice of building materials affects the environmental burdens in non-residential and multistorey residential building construction

Nguyen, Thuy Le Hong, Shrestha, Rijun and Crews, Keith (2018). How the choice of building materials affects the environmental burdens in non-residential and multistorey residential building construction. WCTE 2018 - World Conference on Timber Engineering, Seoul, South Korea, 20-23 August 2018.

Timber type effect on bond strength of frp externally bonded timber

Vahedian, Abbas, Shrestha, Rijun and Crews, Keith (2018). Timber type effect on bond strength of frp externally bonded timber. WCTE 2018 - World Conference on Timber Engineering, Seoul, South Korea, 20-23 August 2018. Seoul, South Korea: World Conference on Timber Engineering (WCTE).

Vibration response of a long-span LVL floor: Comparison between Japanese and Australian assessment measures

Basaglia, Bella, Shrestha, Rijun, Crews, Keith and Yokoyama, Yutaka (2018). Vibration response of a long-span LVL floor: Comparison between Japanese and Australian assessment measures. World Conference on Timber Engineering (WCTE), Seoul, Republic of Korea, 20 -23 August 2018. World Conference on Timber Engineering (WCTE).

Long-term deflection of timber-concrete composite beams in cyclic humidity conditions in bending

Hailu, M., Shrestha, R. and Crews, K. (2016). Long-term deflection of timber-concrete composite beams in cyclic humidity conditions in bending. International Conference on Composite Construction in Steel and Concrete 2013, North Queensland, Australia, 28-31 July 2013. Reston, Virginia: American Society of Civil Engineers. doi: 10.1061/9780784479735.012

Modelling the bond slip behaviour of FRP externally bonded to timber

Vahedian, Abbas, Shrestha, Rijun and Crews, Keith (2016). Modelling the bond slip behaviour of FRP externally bonded to timber. WCTE 2016 - World Conference on Timber Engineering, Vienna, Austria, 22-25 August 2016. Vienna, Austria: Vienna University of Technology.

Predictive models for the stiffness of vertical screws as shear connection in timber-concrete composite floors

Moshiri, F., Shrestha, R. and Crews, K. (2016). Predictive models for the stiffness of vertical screws as shear connection in timber-concrete composite floors. 7th International Conference on Composite Construction in Steel and Concrete, North Queensland, Australia, 28-31July 2013. New York, NY, United States: ASCE. doi: 10.1061/9780784479735.050

The use of cross laminated timber for long span flooring in commercial buildings

Lewis, Kirsten, Basaglia, Bella, Shrestha, Rijun and Crews, Keith (2016). The use of cross laminated timber for long span flooring in commercial buildings. WCTE 2016 - World Conference on Timber Engineering, Vienna, Austria, 22-25 August 2016. Vienna, Austria: Vienna University of Technology.

A comparative life cycle assessment approach of two innovative long span timber floors with its reinforced concrete equivalent in an Australian context

Basaglia, Bella, Lewis, Kirsten, Shrestha, Rijun and Crews, Keith (2015). A comparative life cycle assessment approach of two innovative long span timber floors with its reinforced concrete equivalent in an Australian context. International Conference on Performance-based and Life-cycle Structural Engineering, Brisbane, QLD, Australia, 9-11 December 2015. Brisbane, QLD, Australia: School of Civil Engineering, The University of Queensland. doi: 10.14264/uql.2016.714

Innovation in the design of cross laminated timber for long span floors

Lewis, Kirsten, Basaglia, Bella, Shrestha, Rijun and Crews, Keith (2015). Innovation in the design of cross laminated timber for long span floors. International Conference on Performance-based and Life-cycle Structural Engineering, Brisbane, QLD, Australia, 9-11 December 2015. Brisbane, QLD, Australia: School of Civil Engineering, The University of Queensland. doi: 10.14264/uql.2016.719

Acoustic performance of timber and timber-concrete composite floors

Schluessel, Marc, Shrestha, Rijun and Crews, Keith (2014). Acoustic performance of timber and timber-concrete composite floors. World Conference on Timber Engineering (WCTE).

Development of engineered bamboo

Shrestha, Rijun and Crews, Keith (2014). Development of engineered bamboo. World Conference on Timber Engineering (WCTE).

Long-term experimental investigation of timber composite beams in cyclic humidity conditions

Hailu, Mulugheta, Shrestha, Rijun and Crews, Keith (2014). Long-term experimental investigation of timber composite beams in cyclic humidity conditions. World Conference on Timber Engineering (WCTE).

Nonlinear long-term analysis of timber-concrete composite structures with finite element-finite difference scheme

Khorsandnia, Nima, Valipour, Hamid R. and Crews, Keith (2014). Nonlinear long-term analysis of timber-concrete composite structures with finite element-finite difference scheme. Trans Tech Publications. doi: 10.4028/www.scientific.net/AMM.553.618

Experimental investigations of material properties of timber utility poles using various material testing approaches

Elsener, Roman, Dackermann, Ulrike, Li, Jian Chun, Samali, Bijan and Crews, Keith (2013). Experimental investigations of material properties of timber utility poles using various material testing approaches. doi: 10.4028/www.scientific.net/AMR.778.265

Dynamic performance of timber flooring systems

Rijal, R., Samali, B., Shrestha, R., Gerber, G. and Crews, K. (2013). Dynamic performance of timber flooring systems.

Residual strength of timber-concrete composite beams after long-term test

Hailu, M., Gerber, C., Shrestha, R. and Crews, K. (2013). Residual strength of timber-concrete composite beams after long-term test.

Review on long-term behaviour of timber-concrete composite floors

Khorsandnia, N., Valipour, H. R., Shrestha, R., Gerber, C. and Crews, K. (2013). Review on long-term behaviour of timber-concrete composite floors.

Stressed cross-laminated-timber for bridge applications

Shearman, L., Gerber, C. and Crews, K. (2013). Stressed cross-laminated-timber for bridge applications.

The predictive model for strength of inclined screws as shear connection in timber-concrete composite floor

Moshiri, F., Gerber, C., Valipour, H. R., Shrestha, R. and Crews, K. I. (2013). The predictive model for strength of inclined screws as shear connection in timber-concrete composite floor.

Ultimate performance of timber connection with normal screws

Zabihi, Z., Shrethta, R., Samali, B. and Crews, K. (2013). Ultimate performance of timber connection with normal screws.

Investigation on TCC systems using self-compacting concrete

Moshiri, Farzad, Shrestha, Rijun and Crews, Keith (2013). Investigation on TCC systems using self-compacting concrete. Hokkaido University collection of Scholarly Academic Papers, HUSCAP.

An investigation on TCC joints using expanded polystyrene light-weight concrete

Moshiri, Farzad, Garven, Chris, Gerber, Christophe, Valipour, Hamid R., Shrestha, Jiijun and Crews, Keith (2012). An investigation on TCC joints using expanded polystyrene light-weight concrete.

Comparative study on analytical modelling of short- and long-term behaviour in timber-concrete composite systems

Khorsandnia, Nima, Valipour, Hamid R., Gerber, Christophe, Shrestha, Rijun and Crews, Keith (2012). Comparative study on analytical modelling of short- and long-term behaviour in timber-concrete composite systems.

Experimental investigation on epoxy bonded shear connection for timber-concrete composites

Shrestha, Rijun, Mak, James and Crews, Keith (2012). Experimental investigation on epoxy bonded shear connection for timber-concrete composites.

Finite element modeling of timber-concrete composite beams under short-term loadings

Khorsandnia, Nima, Valipour, Hamid R. and Crews, Keith (2012). Finite element modeling of timber-concrete composite beams under short-term loadings.

Interim report on long-term test on timber-concrete composite beams

Hailu, Mulugheta, Gerber, Christophe, Shrestha, Rijun and Crews, Keith (2012). Interim report on long-term test on timber-concrete composite beams.

Numerical and experimental analysis of the vertical vibrations on several designs of timber footbridges

Bano, Vanessa, Vivas, Julio, Rodriguez, Soledad and Crews, Keith (2012). Numerical and experimental analysis of the vertical vibrations on several designs of timber footbridges.

Serviceability and ultimate performance of long span timber floor modules

Zabihi, Zhinus, Samali, Bijan, Shrestha, Rijun, Gerber, Christophe and Crews, Keith (2012). Serviceability and ultimate performance of long span timber floor modules.

Capacity of Compression Members in Heritage Timber Truss Bridges

Nicholas, A., Ariyaratne, W. and Crews, K. (2012). Capacity of Compression Members in Heritage Timber Truss Bridges. 6th International Conference on Bridge Maintenance, Safety and Management (IABMAS), Stresa Italy, Jul 08-12, 2012. BOCA RATON: CRC PRESS-TAYLOR & FRANCIS GROUP.

Finite element evaluation of Non-Destructive Testing methods for embedded timber poles in service

Zad, A., Li, J., Samali, B. and Crews, K. (2011). Finite element evaluation of Non-Destructive Testing methods for embedded timber poles in service. 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM), Melbourne, Australia, 7-10 December 2010.

Development of high performance structural timver systems for non residential buildings in New Zealand and Australia

Crews, K. I., Buchanan, A. H., Quenneville, P. and Pampanin, S. (2011). Development of high performance structural timver systems for non residential buildings in New Zealand and Australia. doi: 10.1016/j.proeng.2011.07.199

A system for bridge network condition assessment and prediction

Samali, B., Crews, K. I., Aboura, K., Ariyaratne, W. and Manamperi, P. B. (2011). A system for bridge network condition assessment and prediction. 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM), Melbourne Australia, Dec 07-10, 2010. BOCA RATON: CRC PRESS-TAYLOR & FRANCIS GROUP.

Damage evaluation of a repaired timber beam using modal-based method

Samali, B., Li, J., Crews, K. and Choi, F. C. (2011). Damage evaluation of a repaired timber beam using modal-based method. 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM), Melbourne Australia, Dec 07-10, 2010. BOCA RATON: CRC PRESS-TAYLOR & FRANCIS GROUP.

Dynamic performance of timber-concrete composite flooring systems

Rijal, R., Samali, B. and Crews, K. (2011). Dynamic performance of timber-concrete composite flooring systems. 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM), Melbourne Australia, Dec 07-10, 2010. BOCA RATON: CRC PRESS-TAYLOR & FRANCIS GROUP.

Modern trends in long span timber flooring systems

Zabihi, Z., Crews, K. and Samali, B. (2011). Modern trends in long span timber flooring systems. 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM), Melbourne Australia, Dec 07-10, 2010. BOCA RATON: CRC PRESS-TAYLOR & FRANCIS GROUP.

Systematisation of timber-concrete composite connections

Gerber, C. and Crews, K. (2011). Systematisation of timber-concrete composite connections. 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM), Melbourne Australia, Dec 07-10, 2010. BOCA RATON: CRC PRESS-TAYLOR & FRANCIS GROUP.

Tension perpendicular to grain strength of wood, Laminated Veneer Lumber (LVL), and Cross-Banded LVL (LVL-C)

Ardalany, M., Deam, B., Fragiacomo, M. and Crews, K. I. (2011). Tension perpendicular to grain strength of wood, Laminated Veneer Lumber (LVL), and Cross-Banded LVL (LVL-C). 21st Australasian Conference on the Mechanics of Structures and Materials (ACMSM), Melbourne Australia, Dec 07-10, 2010. BOCA RATON: CRC PRESS-TAYLOR & FRANCIS GROUP.

Development of timber concrete composite flooring in Australia and New Zealand

Gerber, Christophe, Crews, Keith, Foscoliano, Matteo and Agus, Salvatorangelo (2010). Development of timber concrete composite flooring in Australia and New Zealand.

Dynamic behaviour of timber-concrete composite flooring systems

Rijal, Rajendra, Samali, Bijan, Crews, Keith and Shrestha, Rijun (2010). Dynamic behaviour of timber-concrete composite flooring systems.

Development of grading rules for re-cycled timber used in structural applications

Crews, Keith and MacKenzie, Colin (2008). Development of grading rules for re-cycled timber used in structural applications.

Development of semi-prefabricated timber-concrete composite floors in Australasia

Yeoh, David, Fragiacomo, Massimo, Buchanan, Andy, Crews, Keith, Haskell, Jenny and Deam, Bruce (2008). Development of semi-prefabricated timber-concrete composite floors in Australasia.

Investigation on the structural behaviour of timber concrete composite connections

Gerber, C., Crews, K., Yeo, D. and Buchanan, A. H. (2008). Investigation on the structural behaviour of timber concrete composite connections.

Numerical and empirical approaches for the assessment of the load distribution in SSP structures

Gerber, C. and Crews, K. (2008). Numerical and empirical approaches for the assessment of the load distribution in SSP structures.

Stochastic deterioration processes for bridge lifetime assessment

Aboura, Khalid, Samali, Bijan, Crews, Keith and Li, Jianchun (2008). Stochastic deterioration processes for bridge lifetime assessment. doi: 10.1109/BROADCOM.2008.6

Stochastic processes for modelling bridge deterioration

Aboura, K., Samali, B., Crews, K. and Li, J. (2008). Stochastic processes for modelling bridge deterioration.

Understanding the composite characteristics of stressed-skin panels

Gerber, Christophe, Crews, Keith and Sigrist, Christophe (2008). Understanding the composite characteristics of stressed-skin panels.

Bridging the Gap – A design process case study for an “Intelligent” footbridge

Anderson, Dirk and Crews, Keith (2008). Bridging the Gap – A design process case study for an “Intelligent” footbridge. IABSE Conference, Helsinki, Finaland, 4-6 June 2008. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE). doi: 10.2749/222137808796106332

A cost effective approach for integrity assessment of timber bridges

Li, J., Samali, B. and Crews, K. (2007). A cost effective approach for integrity assessment of timber bridges.

Accessible and reliable design of stressed-skin panels - An Australian perspective

Gerber, C., Crews, K. and Sigrist, C. (2007). Accessible and reliable design of stressed-skin panels - An Australian perspective.

Damage evaluation of a timber beam using a modal-based method

Choi, F. C., Li, J., Samali, B. and Crews, K. (2007). Damage evaluation of a timber beam using a modal-based method.

Defining appropriate limit states for design of timber connections in Australia and New Zealand

Crews, Keith (2007). Defining appropriate limit states for design of timber connections in Australia and New Zealand.

Screw- and nail-gluing techniques for wood composite structures

Gerber, C., Crews, K. and Sigrist, C. (2007). Screw- and nail-gluing techniques for wood composite structures.

An experimental study on damage detection of structures using a timber beam

Choi, Fook Choon, Li, Jianchun, Samali, Bijan and Crews, Keith (2007). An experimental study on damage detection of structures using a timber beam. 8th International Conference on Motion and Vibration Control, Daejeon South Korea, Aug 28-30, 2006. SEOUL: KOREAN SOC MECHANICAL ENGINEERS. doi: 10.1007/BF03027066

Experimental investigations on a laboratory timber bridge using Damage Index Method for plate-like structures

Samali, Bijan, Choi, Fook Choon, Li, Jianchun and Crews, Keith (2007). Experimental investigations on a laboratory timber bridge using Damage Index Method for plate-like structures. 5th Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia, 10-12 December, 2007. Brisbane: Engineers Australia.

Assessment of the composite action of wood stressed-skin panels

Gerber, Christophe, Crews, Keith and Sigrist, Christophe (2006). Assessment of the composite action of wood stressed-skin panels.

Calibration of a laboratory timber bridge finite element model using the experimental modal data

Choi, Fook Choon, Crews, Keith, Samali, Bijan and Li, Jianchun (2006). Calibration of a laboratory timber bridge finite element model using the experimental modal data.

Defining appropriate limit states for design of timber connections

Crews, Keith and Hutchings, Bruce (2006). Defining appropriate limit states for design of timber connections.

Impact of different numerical techniques on damage identification in structures

Choi, Fook Choon, Li, Jianchun, Samali, Bijan and Crews, Keith (2006). Impact of different numerical techniques on damage identification in structures.

On the service responses and failure mechanisms of stressed-skin panels - Experimental approach

Gerber, Christophe, Crews, Keith and Sigrist, Christophe (2006). On the service responses and failure mechanisms of stressed-skin panels - Experimental approach.

Simulating the serviceability of stressed-skin panels with changing boundary conditions - Finite element approach

Gerber, Christophe, Crews, Keith and Sigrist, Christophe (2006). Simulating the serviceability of stressed-skin panels with changing boundary conditions - Finite element approach.

A fundamental investigation of the composite behaviour of an AAC panel and timber joist floor system

Graham, K. J., Crews, K. I. and Bolden, S. A. (2005). A fundamental investigation of the composite behaviour of an AAC panel and timber joist floor system.

Static and dynamic evaluation of continuity effect of corbels in timber bridges

Choi, F. C., Samali, B., Crews, K. and Li, J. (2005). Static and dynamic evaluation of continuity effect of corbels in timber bridges.

Wood stressed-skin floor systems - Investigation on load/stress distribution in SSP and on ultimate responses

Gerber, C., Crews, K. and Sigrist, C. (2005). Wood stressed-skin floor systems - Investigation on load/stress distribution in SSP and on ultimate responses.

Determining individual member stiffness of bridge structures using a simple dynamic procedure

Li, Jianchun, Samali, Bijan and Crews, Keith (2004). Determining individual member stiffness of bridge structures using a simple dynamic procedure.

An overview of the development of stress laminated cellular timber bridge decks for short to medium span applications in Australia

Crews, K (2003). An overview of the development of stress laminated cellular timber bridge decks for short to medium span applications in Australia. International Conference on High Performance Materials in Bridges, Kona Hi, Jul 29-Aug 03, 2001. NEW YORK: AMER SOC CIVIL ENGINEERS. doi: 10.1061/40691(2003)15

Development of high performance timber bridges in Australia

Crews, K (2001). Development of high performance timber bridges in Australia. IABSE Conference on Innovative Wooden Structures and Bridges, Lahti Finland, Aug 29-31, 2001. ZURICH: IABSE-AIPC-IVBH. doi: 10.2749/222137801796348476

Overview of developments and research in wooden structures in Australia and New Zealand

Crews, Keith (2001). Overview of developments and research in wooden structures in Australia and New Zealand. Innovative Wooden Structures and Bridges, Lahti, Finnland, 29-31 August 2001. Zurich, Switzerland: International Association for Bridge and Structural Engineering (IABSE). doi: 10.2749/222137801796348250

To develop new cost-effective procedures for testing the structural response of short/medium span bridge decks

Benitez, MF, Bakoss, S, Crews, K and Samali, B (2001). To develop new cost-effective procedures for testing the structural response of short/medium span bridge decks. IABSE Conference on Innovative Wooden Structures and Bridges, Lahti Finland, Aug 29-31, 2001. ZURICH: IABSE-AIPC-IVBH. doi: 10.2749/222137801796348520

Enhancing the performance of laminated veneer lumber beams with carbon fibre reinforcement

Greenland, AG, Bakoss, SL and Crews, KI (1999). Enhancing the performance of laminated veneer lumber beams with carbon fibre reinforcement. 16th Australasian Conference on the Mechanics of Structure and Materials, Sydney Australia, Dec 08-10, 1999. LEIDEN: A A BALKEMA PUBLISHERS.

Enhancing timber structures with advanced fibre reinforced plastic composite reinforcements

Greenland, AG, Crews, KI and Bakoss, SL (1998). Enhancing timber structures with advanced fibre reinforced plastic composite reinforcements. 5th World Conference on Timber Engineering, Montreux Switzerland, Aug 17-20, 1998. LAUSANNE: PRESSES POLYTECHNIQUES ET UNIVERSITAIRES ROMANDES.